SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller User Manual

1. はじめに

This manual provides instructions for the installation, operation, and maintenance of the SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller. This device is designed for seamless integration into lighting systems, offering wireless control for both residential and commercial applications. It operates on 120-277VAC line voltage and supports various load types.

Figure 1: SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller with its packaging.

2. 安全情報

• 警告： Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
• Disconnect power at the circuit breaker or fuse before installing or servicing the device.
• このデバイスを指定された定格を超える負荷で使用しないでください。
• すべての配線接続が安全かつ適切に絶縁されていることを確認してください。
• このデバイスは屋内での使用のみを目的としています。
• The device meets regulatory guidelines for current leakage, ensuring safe operation.

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• Wireless Wall Switch and Load Controller (SWX-851-WH)
• ワイヤーリード
• 取り付けネジ
• ワイヤーナット
• 説明書（このマニュアル）

4. セットアップとインストール

4.1配線手順

The SWX-851-WH supports both 2-wire and 3-wire installations and does not require a neutral connection or a minimum load. It is compatible with 120-277VAC line voltage システム。

• 始める前に: ブレーカーで電源をオフにします。
• Identify the LINE (hot) and LOAD wires in the wall box.
• Connect the wires from the SWX-851-WH to the corresponding wires in the wall box using the provided wire nuts:
  • 黒ワイヤー: Connect to LINE (hot) wire.
  • 青いワイヤー： Connect to LOAD wire.
  • 緑のワイヤー： Connect to GROUND wire.
  • White (or Yellow/Green) Wire: This is the NEUTRAL connection. If a neutral connection is available and desired, connect it. If no neutral is present or required, cap this wire off.
• すべての接続が安全であることを確認します。

図2：背面 view of the SWX-851-WH, illustrating wiring connections. Black for Line, Blue for Load, Green for Ground, and White/Yellow/Green for Neutral (optional).

4.2物理的な設置

• Carefully push the wired controller into the wall box. The compact design allows for easier installation in crowded boxes.
• Secure the controller to the wall box using the provided mounting screws.
• Install the wall plate (not included) over the controller.
• 回路ブレーカーで電源を復旧します。

4.3 ワイヤレスペアリング

The SWX-851-WH can be paired with up to 30 wireless sensors and remote wall stations for automatic lighting control. Refer to the specific instructions for your SENSORWORX wireless sensors or remote wall stations for pairing procedures. Typically, pairing involves a sequence of button presses on both devices.

For detailed instructions, you may scan the QR code on the back of the device or visit the SENSORWORX website. A direct link to the instructions is available ここ.

5. 操作

5.1 基本的なオン/オフ制御

The primary function of the SWX-851-WH is to control connected lighting loads. Press the button on the switch to toggle the connected lights ON or OFF.

図3: 前面 view of the SWX-851-WH, showing the control button.

5.2 高度な構成

The SWX-851-WH offers configurable settings for time delays, operational modes (occupancy, vacancy, switch disable), and photocell settings. These adjustments can be made without removing the cover plate, typically through specific button press sequences or via a paired sensor/programmer.

• 占有モード: Lights turn ON automatically when occupancy is detected and OFF after a set time delay when the space is vacant.
• 空室モード: Lights must be turned ON manually but turn OFF automatically after a set time delay when the space is vacant.
• Switch Disable Mode: Disables the local switch button, allowing control only via paired wireless devices.
• フォトセル設定: Adjusts light level thresholds for automatic control based on ambient light.

Consult the full product documentation or the SENSORWORX website for detailed instructions on accessing and modifying these advanced settings.

6. メンテナンス

• クリーニング： To clean the device, wipe with a soft, damp 布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。清掃前に必ず電源を切ってください。
• 検査： Periodically inspect the device for any signs of damage or loose connections. If damage is found, disconnect power and contact a qualified electrician.
• ユーザーが修理できる部品は内部にありません。

7。 トラブルシューティング

If the problem persists after attempting these solutions, contact SENSORWORX customer support or a qualified electrician.

8. 仕様

9. 保証とサポート

9.1製品保証

The SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller comes with a 5年間保証 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims, please retain your proof of purchase.

9.2 カスタマーサポート

For technical assistance, troubleshooting, or warranty inquiries, please contact SENSORWORX customer support. Visit the official SENSORWORX web連絡先情報と追加リソースについては、こちらのサイトをご覧ください。

Webサイト： www.sensorworx.com