導入
Thank you for choosing the KOBB KBS10A Digital Battery Charger. This device is designed to charge and maintain 6V and 12V batteries up to 200 Ampere-hours (Ah). It features advanced microprocessor technology for automatic analysis and adjustment of charging parameters based on battery type, capacity, and discharge level. The KBS10A also includes desulfation and battery repair functions, ensuring optimal battery health and extended lifespan. Please read this manual carefully before use to ensure safe and efficient operation.
安全情報
- バッテリーを扱うときは、必ず保護眼鏡と保護服を着用してください。
- 充電エリアの換気を十分に行ってください。
- Never charge a frozen battery. Allow it to thaw before charging.
- バッテリーや充電器の近くで喫煙したり、火花や炎を起こさないでください。
- Connect the charger to the battery before plugging it into an AC outlet. Disconnect from AC power before disconnecting from the battery.
- 赤（+）clを接続しますamp プラスのバッテリー端子と黒の（-）端子にamp バッテリーのマイナス端子へ。
- バッテリーのショートを避けてくださいamps.
- Keep the charger away from water, oil, and dust to maintain its IP65 rating.
- If the battery is deeply discharged (below 3V), the charger may not detect it immediately. Follow specific instructions for deeply discharged batteries.
製品の特徴
- 多彩な充電: Supports 6V and 12V batteries up to 200Ah, including Lead-Acid (Wet), Gel, MF, AGM, EFB, VRLA, and LiFePO4 Lithium batteries.
- Battery Revitalization: Cleans sulfate and oxidation from battery plates and performs repair operations to restore battery performance.
- 高度な充電技術: 10sの特徴tage charging program for comprehensive and efficient battery care.
- インテリジェント操作: Microprocessor-controlled for automatic battery analysis and optimal charging parameter selection.
- 全天候型パフォーマンス: Designed for superior charging capacity in both hot (up to 40°C) and cold (down to -20°C) conditions.
- 総合的な安全性: Includes temperature compensation, reverse polarity protection, overheating protection, overload protection, spark-proof connections, short circuit protection, low voltage protection, and high voltage保護。
- 耐久性に優れたデザイン: IP65 rated for water, dust, and oil resistance, ensuring reliability in various environments.
- 深放電回復: Capable of charging deeply discharged batteries with voltag最低3Vです。
Image: The KOBB KBS10A charger features advanced safety technology, protecting against common electrical issues during charging.
Image: The KOBB KBS10A charger boasts an IP65 rating, making it resistant to water, dust, and oil for enhanced durability.
パッケージ内容
The KOBB KBS10A package includes the following items:
- KOBB KBS10A Digital Battery Charger
- バッテリーClamps（ワニ口クリップ）
- Ring Terminal Connectors with Fuse
- 収納バッグ
- ユーザーマニュアル
Image: The KOBB KBS10A charger comes with essential accessories for versatile battery connection and convenient storage.
設定
- バッテリーを準備します: バッテリー端子が清潔で腐食していないことを確認してください。必要に応じて、ワイヤーブラシで清掃してください。
- バッテリーに接続:
- 赤い（+）充電器clを接続しますamp or ring terminal to the positive (+) battery terminal.
- 黒（-）充電器を接続amp or ring terminal to the negative (-) battery terminal.
- 接続が安全であることを確認します。
- AC電源に接続します: Plug the charger's AC power cord into a suitable electrical outlet. The charger will power on and begin its initial analysis.
- 充電モードを選択: Press the 'MODE' button to select the appropriate charging mode for your battery type (see Operating Instructions for details).
Image: The KOBB KBS10A charger properly connected to a car battery, ready for operation.
操作手順
モード選択
After connecting the charger to the battery and AC power, use the 'MODE' button to cycle through the available charging programs. The charger will automatically detect the battery voltage (6V or 12V) and suggest a mode. Confirm or change the mode as needed for your specific battery type.
- STD： Standard Lead-Acid batteries.
- AGM/C: AGM (Absorbed Glass Mat) batteries and Cold Weather charging.
- ゲル： Gel Cell batteries.
- ウェット： Wet Cell (Flooded) batteries.
- EFB: Enhanced Flooded Batteries.
- カリフォルニア州: Calcium batteries.
- LFP / 12V LiFePO4: Lithium Iron Phosphate batteries (12V).
- RECOND MODE: Recondition mode for deeply discharged or sulfated batteries.
- SUPPLY MODE: 一定のボリュームを提供するtage output for powering 12V devices or maintaining battery voltage during vehicle diagnostics.
Image: The KOBB KBS10A charger offers multiple modes for charging and maintaining various 6V/12V battery types.
10-Stage 充電プログラム
The KOBB KBS10A utilizes a sophisticated 10-stage charging process to optimize battery performance and longevity:
- アクティベーション: Initiates charging for batteries with voltage3V以上。
- 脱硫酸化: Applies pulse voltage to break down lead sulfate crystals, improving battery capacity.
- ソフトスタート： Gradually increases current to prevent damage to deeply discharged batteries.
- Bulk Charge (Constant Current): バッテリー容量が約 80% に達するまで最大電流で充電します。
- Absorption Charge (Constant Voltage）： 一定の電圧でバッテリーを充電しますtage, gradually reducing current until 100% capacity is reached.
- 分析： Tests the battery's ability to hold a charge.
- 再調整: A special mode for restoring deeply discharged or sulfated batteries.
- フロートチャージ： Maintains the battery at full charge by providing a constant, low voltage.
- パルス維持: Applies small pulses of current to keep the battery optimized during long-term storage.
- イコライゼーション: セルボリュームのバランスをとるtages in certain battery types to maximize performance.
Image: Detailed graph of the 10-stage charging program, demonstrating the intelligent charging cycle for optimal battery health.
Charging Deeply Discharged Batteries
The KBS10A can charge batteries with voltages as low as 3V. If a battery is severely discharged, the charger may take a moment to recognize it. Ensure proper connection and select the appropriate mode. The charger will automatically initiate a soft start or recondition cycle if needed.
Image: The KOBB KBS10A is capable of charging deeply discharged batteries, even those with voltag最低3Vです。
メンテナンス
- クリーニング： 清掃する前に、充電器をAC電源とバッテリーから外してください。外側は柔らかくて乾いた布で拭いてください。amp 布。 刺激の強い化学薬品や研磨剤を使用しないでください。
- ストレージ： 充電器は使用しないときは、涼しく乾燥した場所に保管してください。直射日光や極端な温度を避けてください。
- ケーブル検査: Regularly inspect the charging cables and connectors for any signs of damage, fraying, or corrosion. Replace damaged components immediately.
- バッテリー端子: 良好な電気接触を確保するために、バッテリー端子を清潔に保ってください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 充電器がオンになりません。 | No AC power; Faulty outlet. | Check AC power connection; Try a different outlet. |
| 充電器がバッテリーを検出しません。 | Poor connection; Battery voltage too low (below 3V); Incorrect mode selected. | clを確認してくださいamps are securely connected; For very low voltage batteries, ensure connections are solid and allow time for detection; Select correct mode. |
| 充電プロセスが遅いです。 | Large battery capacity; Deeply discharged battery; Cold ambient temperature. | This is normal for large or deeply discharged batteries. Charging speed is optimized for battery health. Ensure charger is in a suitable temperature environment. |
| Charger displays an error. | Reverse polarity; Short circuit; Overheating. | Check battery connections for correct polarity; Inspect cables for short circuits; Allow charger to cool down if it's overheating. |
仕様
- モデル： KBS10A
- 入力ボリュームtage: 220-240V AC, 50/60Hz (Typical for TR market)
- 出力巻tage: 6V/12V DC
- 充電電流: 10 Ampここで
- バッテリー容量: 最大200Ah
- サポートされているバッテリーの種類： Lead-Acid (Wet), Gel, MF, AGM, EFB, VRLA, LiFePO4
- 最小開始ボリュームtage: 3V
- 寸法: 18 x 7 x 34 cm
- 重さ： 1.07キログラム
- 保護等級: IP65 (Waterproof, Dustproof, Oil-proof)
- 安全機能: Temperature Compensation, Reverse Polarity Protection, Overheating Protection, Overload Protection, Spark-Proof, Short Circuit Protection, Low Voltage保護、高ボラティリティtage保護。
保証とサポート
KOBB products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your retailer. If you encounter any issues or have questions regarding the KOBB KBS10A charger, please contact KOBB customer support or the seller from whom you purchased the product for assistance.
For further information, you may visit the official KOBB store: KOBB Store on Amazon.com.tr