SUPERONE S7

SUPERONE Bike Phone Holder Instruction Manual

ブランド: スーパーワン

モデル: S7

製品終了view

The SUPERONE Bike Phone Holder is designed to securely mount your smartphone on various handlebars, including those on bicycles, motorcycles, and scooters. It features a 1-second lock mechanism for quick phone access, anti-shake design with shock-absorbing silicone, and 360-degree rotation for optimal viewing。

SUPERONE Bike Phone Holder mounted on a handlebar with a phone displaying a person riding a bike.

Figure 1: SUPERONE Bike Phone Holder with a phone mounted, illustrating its primary use on a bike.

セットアップとインストール

Follow these steps to properly install your SUPERONE Bike Phone Holder on your vehicle's handlebar.

Step 1: Assemble the Phone Holder

Attach the phone holder bracket to the handlebar clamp. Ensure the ball joint is securely seated and tightened for a robust connection.

Step 1 of installation showing assembly of phone holder and handlebar clamp.

Figure 2: Illustration of assembling the phone holder to the handlebar clamp.

Step 2: Mount to Handlebar

ハンドルバーを開くclamp and position it on your desired handlebar location. The clamp is designed for handlebars with diameters between 0.65 to 1.2 inches (16.51-30.48mm). Rotate the knob to tighten the clamp firmly onto the handlebar. The built-in silicone pad prevents scratching and ensures a secure grip.

Close-up of the phone holder's handlebar clamp with built-in silicone layer for secure and scratch-free installation.

図3:詳細 view of the handlebar clamp mechanism, highlighting the silicone layer.

Step 3: Secure the Lock

After tightening the clamp, set the security lock on the side of the phone holder to the locked state. This provides perfect fixation and protects your phone even on bumpy roads or during emergency braking.

Image showing the anti-drop features of the phone holder, including a safety lock and silicone layer.

Figure 4: The phone holder's anti-drop design, featuring the safety lock and protective silicone layer.

操作手順

The SUPERONE Bike Phone Holder is designed for ease of use, allowing quick and secure phone management while riding.

Inserting and Removing Your Phone

The holder features an effortless one-handed access mechanism. Simply press the side arms to expand the holder, place your phone (4.7-7.2 inches, up to 0.6 inches thick including case) into the cradle, and release the arms. The holder will automatically secure your phone. To remove, press the side arms again.

Hand demonstrating one-handed operation of the phone holder, mounting or releasing a phone.

Figure 5: Demonstrating the quick one-handed operation for mounting or releasing a phone.

調整中 View角度

Utilize the universal ball joint design to rotate your phone 360 degrees. This allows for smooth and easy switching between vertical and horizontal modes, ensuring you can achieve the best visual effect for navigation, calls, or music control.

Phone holder with a phone rotating 360 degrees to show adjustable view角度を変える。

Figure 6: The 360-degree rotation feature for optimal view角度を変える。

メンテナンス

To ensure the longevity and optimal performance of your SUPERONE Bike Phone Holder, follow these simple maintenance guidelines:

  • クリーニング: ホルダーは定期的に柔らかくて乾いた布で拭いてください。amp 布で埃や汚れを拭き取ってください。素材を傷める可能性があるため、刺激の強い化学薬品や研磨剤入りの洗剤の使用は避けてください。
  • 検査: Periodically check all moving parts, including the handlebar clamp and the ball joint, for any signs of wear or looseness. Ensure all screws and knobs are tightened securely before each use.
  • ストレージ: When not in use for extended periods, store the phone holder in a cool, dry place away from direct sunlight and extreme temperatures.

トラブルシューティング

If you encounter any issues with your SUPERONE Bike Phone Holder, refer to the following common troubleshooting tips:

問題考えられる原因解決
Phone feels loose or shakes excessively.Phone not fully seated, or side lock not engaged.Ensure the phone is properly inserted and the side arms have fully closed around it. Verify the security lock is in the locked position.
Mount slips on the handlebar.ハンドルバーclamp 十分に締め付けられていません。Tighten the knob on the handlebar clamp until it is firmly secured. Ensure the silicone pad is correctly positioned.
携帯電話を回転させるのは難しい。Ball joint might be too tight or obstructed.Check for any debris around the ball joint. If there's a tightening ring for the ball joint, ensure it's not overly tightened.

仕様

特徴詳細
モデル番号S7
対応携帯電話サイズ4.7 - 7.2 inches (up to 0.6 inches thick including case)
適合ハンドルバー径0.65 - 1.2インチ(16.51 - 30.48 mm)
取り付けタイプハンドルバーClamp
特集1-second Lock, Anti-Shake, 360° Rotatable, Foldable, Shock-absorbing Silicone, Tool-free Installation
アイテム重量7.8オンス
パッケージ寸法6.3 x 4.06 x 2.4インチ
Image illustrating the wide compatibility of the phone holder with various phone sizes and handlebar types.

図7:以上view of the phone holder's wide compatibility with different phone and handlebar sizes.

保証とサポート

SUPERONE stands behind the quality of its products. Your SUPERONE Bike Phone Holder comes with a comprehensive warranty and dedicated customer support.

  • 保証: All SUPERONE bicycle phone holders include a hassle-free 18-month warranty from the date of purchase.
  • テクニカルサポート: Lifetime technical support is provided for all SUPERONE products.
  • 顧客サービス: For any questions, concerns, or assistance, please contact the SUPERONE team. Our customer service is available 24/7 to help resolve any issues for our valued customers.

For support, please visit the official SUPERONE webサイトをご覧いただくか、製品パッケージに記載されている連絡先情報を参照してください。

© 2025 SUPERONE. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.