ULANZI PM01 Magnetic Expansion Mount User Manual

導入

The ULANZI PM01 Magnetic Expansion Mount is designed to enhance the versatility of your DJI Osmo Pocket 3 or Pocket 4 camera. This mount provides secure attachment and multiple expansion options, allowing for a wide range of creative setups and stable recording in various environments.

Key features include a strong magnetic attachment, a secure locking mechanism, anti-scratch silicone padding, and versatile accessory ports.

パッケージ内容

• ULANZI PM01 Magnetic Expansion Mount
• 安全ネジ
• ストラップ

セットアップ手順

1. Attaching the DJI Osmo Pocket 3/4:

   Carefully align your DJI Osmo Pocket 3 or Pocket 4 with the ULANZI PM01 mount. The mount is designed for a snug fit. Ensure the device is seated correctly within the mount's frame.

   

   Image: The ULANZI PM01 mount securely holds a DJI Osmo Pocket 3, demonstrating its precise fit that does not obstruct the screen's rotation or joystick controls. The image also shows the USB-C port remaining accessible for charging or data transfer.

2. デバイスのセキュリティ保護:

   Once the camera is in place, engage the safety lock mechanism to prevent accidental detachment. The interior features anti-slip silicone to protect your device from scratches and provide a firm grip.
3. 磁気アタッチメント:

   The PM01 mount features powerful magnets on both sides, allowing it to securely attach to any metallic surface. Ensure the metallic surface is clean and flat for optimal magnetic adhesion. The recommended maximum load capacity for magnetic attachment is 500g (1.1 lbs). The mount also features a magnetic surface to attach compatible accessories like magnetic phone holders.

   

   Image: This image demonstrates the strong, dual-sided magnetic attraction of the ULANZI PM01 mount. It shows the mount attached to a metal surface, and a smartphone attached to the mount, highlighting its versatility and secure hold for various setups. A text overlay indicates a recommended load capacity of 500g.

操作手順

1. Utilizing Expansion Ports:

   The mount is equipped with a side cold shoe, a foldable action camera mount, a 1/4-inch screw hole, and an ARRI positioning hole. These ports allow for the attachment of various accessories such as microphones, LED lights, tripods, and other camera gear.

   

   画像: 詳細な view of the ULANZI PM01 mount, showcasing its multiple expansion interfaces including a cold shoe mount, 1/4-inch screw thread, and ARRI positioning holes, designed for attaching a wide range of photographic accessories.

2. 角度の調整:

   The base of the mount allows for smooth angle adjustments from 180° to 360°. This flexibility enables you to achieve the perfect viewing or recording position for your content.

   

   Image: This graphic illustrates the extensive angle adjustment range of the ULANZI PM01 mount, showing how it can be smoothly rotated from 180 degrees to a full 360 degrees to achieve optimal shooting angles.

3. 多彩な取り付け:

   The sturdy design supports stable use on various surfaces, including desks and walls, adapting to different shooting scenarios. The magnetic base allows for quick repositioning on compatible metal surfaces.

   

   Image: A collage showing the ULANZI PM01 mount in action across different scenarios: attached to a tripod with a smartphone, mounted on a wall with an LED light for indoor shooting, and used handheld with an extension grip for outdoor recording, demonstrating its adaptability.

メンテナンス

• マウントを清潔に保ち、ほこりやゴミが付かないようにしてください。清掃には柔らかく乾いた布をご使用ください。
• Ensure the magnetic surfaces are clean to maintain strong adhesion.
• マウントを極端な温度や強い化学物質にさらさないでください。
• Store the mount in a dry place when not in use.

トラブルシューティング

• Device not secure in mount:

  Ensure the DJI Osmo Pocket 3/4 is fully seated and the safety lock is engaged. Check for any obstructions preventing a snug fit.
• 磁気吸着力が弱い:

  Verify that both the mount's magnetic surface and the metallic surface it's attaching to are clean and free of dust or particles. Ensure the metallic surface is ferrous (attracts magnets) and flat.

• Accessories do not fit expansion ports:

  Confirm that your accessory is compatible with the cold shoe, 1/4-inch screw thread, or ARRI positioning hole. Some accessories may require specific adapters.

仕様

ポータビリティ

The ULANZI PM01 mount is designed to be foldable and compact, allowing it to be stored easily without disassembly. It is compatible with the original camera case, making it convenient for travel and quick setup.

Image: The ULANZI PM01 mount shown in its folded state, being effortlessly placed into a camera bag, emphasizing its compact design for easy transport and storage without needing to dismantle components.