AM ARROWMAX Smart Mini Electric Engraving Pen & Carving Bits User Manual

1. はじめに

This manual provides essential instructions for the safe and effective use of your AM ARROWMAX Smart Mini Electric Engraving Pen and its accompanying carving bits. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2.製品オーバーview

2.1 パッケージ内容

• AM ARROWMAX Smart Mini Electric Engraving Pen (SGS PRO)
• 磁気充電ケーブル
• 30 Engraving Bits
• 12 Polishing Bits
• 収納ケース
• ユーザーマニュアル

This image displays the complete AM ARROWMAX Smart Mini Electric Engraving Pen kit, including the pen, its protective case, a USB charging cable, a variety of engraving and polishing bits, and an illustration of its smart app connectivity.

2.2 主要コンポーネント

この画像は詳細な view of the SGS MAX engraving pen, labeling its key components: the Magnetic Charging Port for easy charging, the Status Display showing battery, mode, and rotation direction, the Power Button for control, the durable Aluminium Alloy Body, and the Chuck for bit changes.

• 磁気充電ポート: For convenient and secure charging of the device.
• ステータス表示： Shows battery level, selected speed mode, and rotation direction.
• 電源ボタン: 電源のオン/オフとモードの選択を制御します。
• アルミニウム合金ボディ： 耐久性と快適なグリップを実現します。
• チャック： Securely holds engraving and polishing bits.

2.3 Engraving and Polishing Bits

The kit includes a comprehensive set of 30 engraving bits and 12 polishing bits, designed for various materials and applications. These bits feature a 2.35mm shank for compatibility.

This image showcases the comprehensive set of 30 engraving bits and 12 polishing bits that come with the ARROWMAX engraving pen, designed for various crafting tasks.

This detailed diagram categorizes and names various engraving bit types, including sharp needle, torch, oval, spherical, bullet, round tipped needle, ladder, round headed cylinder, flat headed cylinder, and inverted ladder types, providing clarity on their specific uses.

This image focuses on the construction of an engraving bit, emphasizing its Diamond Steel material for long life and precise cuts, and its 2.35mm shank with surface blasting for compatibility with most rotary tools.

3. セットアップ

3.1デバイスの充電

1. Connect the magnetic charging cable to the charging port on the engraving pen.
2. USB ケーブルのもう一方の端を互換性のある 5V USB 電源アダプター (別売) に接続します。
3. The status display will indicate the charging progress. Ensure the device is fully charged before first use.

3.2 Attaching/Changing Bits

1. Ensure the engraving pen is powered off.
2. Gently insert the desired engraving or polishing bit into the chuck until it is seated firmly.
3. To remove a bit, pull it straight out from the chuck. No additional tools are required.

4. 操作手順

4.1 電源オン/オフ

Press and hold the Power Button for a few seconds to turn the device on or off.

4.2 Adjusting Speed Modes

The engraving pen features 5 RPM modes for precise control:

This diagram illustrates the five adjustable speed modes of the engraving pen: 'A' for Auto Sensing (10000-30000 RPM), '1' for Low (15000 RPM), '2' for Medium (20000 RPM), '3' for High (25000 RPM), and '4' for Maximum (30000 RPM).

• モードA（自動検知）: Automatically adjusts speed between 10,000-30,000 RPM based on your twist angle.
• モード1（低）: 15,000 回転
• モード2（中）: 20,000 回転
• モード3（高）: 25,000 回転
• Mode 4 (Maximum): 30,000 回転

To change the speed mode, short press the Power Button while the device is on. The status display will show the current mode.

4.3 回転方向の変更

The device supports both forward and reverse rotation. To toggle the direction, press the dedicated direction button (if available, otherwise refer to the specific model's controls) or follow the instructions on the status display. This allows for greater flexibility in engraving and polishing tasks.

4.4 Engraving and Polishing Tips

• Always wear appropriate eye protection during operation.
• Select the correct bit for your material and desired effect.
• Start with a lower speed setting and gradually increase as needed.
• Apply light, consistent pressure. Excessive force can damage the bit or the workpiece.
• Practice on scrap material before working on your final project.
• Ensure your workpiece is securely held to prevent movement during operation.

5. メンテナンス

5.1デバイスのクリーニング

• クリーニングする前に、デバイスの電源がオフになっており、充電器から取り外されていることを確認してください。
• Wipe the body of the engraving pen with a soft, dry cloth.
• Use a small brush or compressed air to remove dust and debris from the chuck area.
• 過酷な化学薬品や研磨剤入りのクリーナーは使用しないでください。

5.2 ビットケア

• Clean bits after each use to remove material residue.
• Store bits in their designated case to prevent damage and loss.
• Replace worn or damaged bits to maintain optimal performance and safety.

5.3バッテリーケア

• バッテリーを頻繁に完全に放電することは避けてください。
• デバイスを使用しないときは、涼しく乾燥した場所に保管してください。
• 長期間保管する場合は、数か月ごとにバッテリーを約 50% まで充電してください。

6。 トラブルシューティング

6.1 デバイスの電源が入らない

• Ensure the battery is charged. Connect the device to the charger and check the status display.
• Press and hold the Power Button firmly for a few seconds.

6.2 Bit Not Holding Securely

• Ensure the bit is fully inserted into the chuck.
• Check if the bit shank is damaged or bent. Use only bits with a 2.35mm shank.

6.3 Poor Engraving/Polishing Performance

• Verify that the correct speed mode is selected for the material.
• Check if the bit is worn or dull. Replace if necessary.
• Ensure you are applying appropriate pressure; too much or too little can affect results.

7. 仕様

8. 安全情報

Always adhere to the following safety guidelines when using the engraving pen:

• 目の保護: 飛散する破片から目を保護するために、必ず安全メガネまたはゴーグルを着用してください。
• 作業エリア: Ensure your work area is well-lit and well-ventilated. Keep it clean and free of clutter.
• 安全なワークピース: Always secure the material you are working on to prevent it from moving unexpectedly.
• Proper Bits: Use only bits designed for the specific task and material.
• 水を避ける: Do not operate the device near water or in damp 条件。
• 子供とペット: デバイスおよびすべての付属品は、子供やペットの手の届かないところに保管してください。
• Unplug Before Changing: Always ensure the device is powered off and disconnected from the charger before changing bits or performing maintenance.
• 過熱を避ける: If the device feels excessively hot, stop use and allow it to cool down.

9. 保証とサポート

For warranty information, technical support, or service inquiries, please refer to the product packaging or contact ARROWMAX customer service directly. Keep your purchase receipt as proof of purchase.