Generic Non-Inflatable Stand Pool PBEDEDAAB-2.6M/8.5FT Instruction Manual

1. はじめに

This manual provides essential instructions for the safe and efficient setup, operation, and maintenance of your Generic Non-Inflatable Stand Pool, model PBEDEDAAB-2.6M/8.5FT. Please read this manual thoroughly before assembly and use to ensure proper functionality and safety.

2. 安全情報

Always prioritize safety when using any swimming pool. Failure to follow these instructions can result in serious injury or death.

• Adult supervision is required at all times for children and pets in or near the pool.
• プールに飛び込んだり飛び込んだりしないでください。水深が浅いため、飛び込むことはできません。
• Ensure the pool is placed on a level, stable surface free from sharp objects.
• 電気機器をプールエリアから遠ざけてください。
• Do not overfill the pool. Adhere to the maximum water level line.
• プールに損傷や摩耗がないか定期的に点検してください。損傷がある場合は使用しないでください。
• Empty and clean the pool regularly to maintain hygiene.
• Secure the pool area to prevent unsupervised access by children or pets.

3. パッケージ内容

セットアップを開始する前に、すべてのコンポーネントが揃っていることを確認してください。

• フレームプール
• 修理部品
• Swimming Rings (quantity may vary)
• Ocean Balls (quantity may vary)
• Toy Water Guns (quantity may vary)

4. セットアップ手順

The Generic Non-Inflatable Stand Pool is designed for quick and easy setup.

1. 場所を選択: Select a flat, stable, and clear area in your backyard, garden, or balcony. Ensure there are no sharp objects or debris that could damage the pool liner.
2. プールを展開する: Carefully unfold the pool structure. The design allows for easy expansion.
3. サポート構造を組み立てる: The pool features an upgraded steel pipe support system. Ensure all support pipes are securely attached and positioned to provide maximum stability. The triangular support structure is designed for enhanced stability.
4. Inspect the Liner: Before filling, check the interior of the pool for any wrinkles or folds. Smooth them out to prevent uneven stress on the material.
5. 水で満たします: Begin filling the pool with water. Do not exceed the designated water level line marked on the inside of the pool. Overfilling can compromise stability and lead to spills.

Figure 4.1: Illustration of the stable triangular support structure.

Figure 4.2: The pool fully set up and in use.

5. 操作手順

Once set up, the pool is ready for use. Always ensure adult supervision.

• 水位: Maintain the water level below the maximum fill line to prevent overflow and maintain structural integrity.
• 排水： To drain the pool, locate the two drain ports on the bottom and sides of the pool. Open these ports to allow water to flow out quickly. Ensure the drainage area can handle the volume of water.

Figure 5.1: Water draining from the pool's side port.

6. メンテナンス

Proper maintenance ensures the longevity and hygiene of your pool.

• クリーニング： After draining, clean the interior surfaces of the pool with mild soap and water. Rinse thoroughly to remove any residue.
• 検査： Regularly inspect the PVC material and support frame for any signs of wear, tears, or damage. Use the provided repair parts for minor punctures if necessary.
• 水質: For prolonged use, consider using appropriate pool chemicals to maintain water quality, following the chemical manufacturer's instructions.

Figure 6.1: Multi-layer PVC material construction for durability.

7. ストレージ

When not in use, proper storage will extend the life of your pool.

1. 完全に排水する: プールからすべての水が排出されていることを確認してください。
2. 清潔で乾燥している: Thoroughly clean the pool and allow it to dry completely to prevent mold and mildew.
3. 折り畳み： Once dry, carefully fold the pool. Its collapsible design makes it easy to fold into a compact size.
4. 店： Store the folded pool in a cool, dry place, away from direct sunlight and extreme temperatures.

Figure 7.1: The pool folded for compact storage.

8。 トラブルシューティング

このセクションでは、発生する可能性のある一般的な問題について説明します。

• Pool Not Stable: Ensure the pool is on a completely flat surface. Verify that all support pipes are correctly assembled and locked into place. Do not overfill the pool.
• ゆっくり排水： Check if the drain ports are fully open and clear of debris. Ensure the ground around the drain is not obstructing water flow.
• Minor Leaks: For small punctures, use the provided repair patches. Clean and dry the area around the leak thoroughly before applying the patch according to its instructions.
• 水質問題: If water becomes cloudy or develops an odor, drain, clean, and refill the pool. Consider using appropriate pool treatment chemicals for continuous use.

9. 仕様

Figure 9.1: Structural details of the pool.

10. カスタマーサポート

For any questions regarding your purchase, service, or product operation, please contact the seller or manufacturer directly. We are committed to ensuring your satisfaction.