mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller Sine Wave for 750W Motor Instruction Manual

製品終了view

This manual provides detailed instructions for the mGYDY 36V/48V 25A Ebike Brushless Motor Controller, designed for 750W motors. It ensures stable speed control and responsive braking for brushless motors, enhancing your electric bike's performance. The controller features an aluminum alloy shell for efficient heat dissipation and precisely designed interfaces for reliable long-term use. A 1T5 cable is included for a complete setup.

Image of the mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller, a silver rectangular unit with multiple black cables extending from one end, against a plain background.

主な特徴

• Powerful Compatibility and Performance: Designed for 36V/48V systems and 750W motors, compatible with KT Accessories. Provides steady speed control and sensitive braking.
• 効率的な放熱: Aluminum alloy shell protects internal circuits from thermal overload, extending product lifespan.
• High Precision Wiring and Interfaces: Minimizes malfunction risks and ensures consistent operation.
• 完全なパッケージ: Includes the brushless controller and a 1T5 cable for convenient installation.
• コンパクトなデザイン: Measures 126x66x39mm with a sleek silver finish, integrating well into e-bike setups.

Close-up image of the mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller's label, detailing its model number (KT36/48ZSRM-EEP10L), rated voltage (DC36V/48V), rated current (12A), maximum current (25±1A), speed set (1-4.2V), brake input (Low-Level), and low voltage protection (DC30/40±0.5V).

Image showing the mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller with its dimensions (126mm length, 66mm width, 39mm height) and various labeled connectors: Light (2Pins), Assist PAS (3Pins), 1T5 (9Pins), Motor (9Pins), and Battery (for XT60).

セットアップ手順

コンポーネントの識別

Before installation, identify all components included in your package:

• mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller
• 1T5ケーブル
• Other accessories (e.g., display, throttle, brakes - if purchased separately or as part of a kit)

接続ガイド

The controller features multiple labeled ports for connecting various e-bike components. Ensure all connections are secure and correctly aligned to prevent damage.

1. バッテリー接続: Connect your e-bike battery to the XT60 connector on the controller. Ensure correct polarity.
2. モーター接続: Connect the motor cable to the 9-pin motor port on the controller.
3. 1T5 Cable Connection: Connect the main 1T5 cable to its designated 9-pin port on the controller. This cable typically branches out to connect other peripherals.
4. ディスプレイ接続: Connect your KT display to the 5-pin display connector on the 1T5 cable. Important: This controller requires a KT display for proper operation.
5. ライト接続: If applicable, connect your e-bike light to the 2-pin light connector on the 1T5 cable.
6. PAS (Pedal Assist Sensor) Connection: Connect the PAS sensor to the 3-pin Assist PAS connector on the 1T5 cable.
7. Brake Lever Connections: Connect your e-bike brake levers to the two 2-pin brake connectors on the 1T5 cable.
8. スロットル接続: If using a thumb throttle, connect it to the 3-pin Thumb Throttle connector on the 1T5 cable.

コントローラの取り付け

Securely mount the controller to your e-bike frame using appropriate fasteners. The aluminum alloy shell is designed for heat dissipation, so ensure it has adequate airflow.

Image illustrating the various connectors of the 1T5 cable, including 9Pin Controller, 2Pin Light, 3Pin Thumb Throttle, 5Pin Display, and two 2Pin Brake connectors, color-coded for easy identification.

Image of the mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller with all its ports clearly labeled, emphasizing the requirement for a KT Display and showing connections for Light, PAS, 1T5, Motor, and Battery (XT60).

Video demonstrating the simple connection steps for the e-bike brushless motor controller, showing how to connect the various cables including the light, PAS, 1T5, motor, and battery, and then connecting a display.

操作手順

Once all components are correctly connected and the battery is charged:

1. 電源オン: Turn on your e-bike's power switch, usually located on the battery or display.
2. ディスプレイのアクティベーション: Activate the KT display. The display will show essential information such as speed, battery level, and assist mode.
3. アシストレベルの選択: Use the controls on your KT display to select your desired pedal assist level.
4. ライディング： Begin pedaling. The motor will provide assistance based on your selected level. If a throttle is installed, it can be used to control speed directly.
5. 制動： The controller is designed for sensitive braking response. Engaging the brake levers will cut power to the motor.
6. 電源を切る： When finished riding, power off the display and then the battery.

メンテナンス

Regular maintenance ensures the longevity and optimal performance of your mGYDY Ebike Brushless Motor Controller.

• 清潔に保ちます： Periodically wipe down the controller's exterior with a dry cloth to remove dirt and dust. Avoid using harsh chemicals or excessive moisture.
• 接続を検査する: Regularly check all cable connections for tightness and signs of wear or corrosion. Loose connections can lead to intermittent power or component failure.
• 過熱を避ける: While the aluminum alloy shell provides good heat dissipation, avoid operating the e-bike in conditions that could lead to extreme overheating. Ensure the controller is not covered or obstructed.
• 水から守る： Although the controller is waterproof, avoid submerging it in water or exposing it to high-pressure water jets.
• ソフトウェアアップデート: If applicable, refer to your KT display manual or manufacturer's website for any available firmware updates for the controller system.

トラブルシューティング

This section addresses common issues you might encounter with your e-bike controller.

No Power to Motor/Display

• バッテリーを確認してください: Ensure the e-bike battery is fully charged and properly connected to the controller.
• 接続を確認してください: Verify that all power cables (battery, motor, display) are securely connected and free from damage.
• ディスプレイの互換性: Confirm that you are using a compatible KT display, as this controller requires one.

モーターが反応しない

• Check Motor Cable: Ensure the motor cable is firmly connected to the controller.
• PAS/Throttle Connection: Verify that the PAS sensor or throttle is correctly connected and functioning.
• ブレーキレバー: Ensure brake levers are not engaged, as they cut motor power. Check brake lever sensor connections.

Intermittent Power/Performance

• 緩い接続: Inspect all connectors for looseness or corrosion.
• 配線の損傷: Check for any visible damage to the wiring or insulation.
• 過熱： Allow the controller to cool down if it feels excessively hot. Ensure it has adequate ventilation.

表示されるエラーコード

Refer to your KT display's instruction manual for specific error code interpretations and troubleshooting steps.

技術仕様

パッケージ内容

製品パッケージには以下のアイテムが含まれています。

• 1 x mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller
• 1 x 1T5 Cable

保証とサポート

This product comes with a 1-Year Manufacturer Warranty. For warranty claims or technical support, please contact the manufacturer or your retailer. Keep your purchase receipt as proof of purchase.