導入
The VONROC Mini Electric Lawnmower is designed for efficient lawn maintenance in small gardens and urban green spaces. Its compact size and lightweight design make it easy to maneuver, providing a convenient solution for precise grass cutting and mulching.
安全情報
警告：本製品を操作する前に、すべての安全に関する警告と指示をお読みください。警告と指示に従わない場合、感電、火災、または重傷を負う可能性があります。
- 安全メガネ、丈夫な履物、聴覚保護具などの適切な個人用保護具を常に着用してください。
- 操作エリアから子供、ペット、および傍観者を遠ざけてください。
- Inspect the lawnmower for any damage before each use. Do not operate if damaged.
- Ensure the power cord is in good condition and avoid cutting it during operation.
- Disconnect the power supply before cleaning, maintenance, or if the machine is left unattended.
- 芝刈り機は、日光または適切な人工光の中でのみ操作してください。
- Avoid operating on wet grass, as this can be slippery and increase the risk of electric shock.
- Be aware of the power cord's position at all times to prevent accidental cutting.
製品終了view
The VONROC Mini Electric Lawnmower is a compact and versatile tool for maintaining small lawns. It features a 350W motor, a 22 cm cutting width, and a mulching function. The design prioritizes ease of use and maneuverability.
図 1: 全体 view of the VONROC Mini Electric Lawnmower.
Figure 2: Key components of the lawnmower, including the softgrip handle, safety switch, height-adjustable shaft, cleaning tool, and 22cm cutting width.
設定
Assembly is required before first use. Follow these steps to prepare your lawnmower:
- ハンドルを取り付ける: Securely connect the upper and lower handle sections using the provided fasteners. Ensure all connections are tight.
- ハンドルの高さを調整します: The telescopic handle can be adjusted to your preferred working height for comfortable operation. Loosen the adjustment mechanism, extend or retract the handle, and then securely tighten it.
- 電源コードを接続します: Ensure the power cord is properly connected to the lawnmower and secured to prevent accidental disconnection during use.
操作手順
This lawnmower is designed for cutting and mulching grass in small areas. Always ensure the area is clear of debris before starting.
1. 刈り高さの調整
The lawnmower offers three cutting height options: 30mm, 40mm, and 50mm. To adjust the cutting height:
- Turn off and unplug the lawnmower.
- Carefully tilt the lawnmower to access the wheels.
- Adjust the wheel height to the desired setting (30mm, 40mm, or 50mm) by moving the adjustment levers. Ensure all wheels are set to the same height.
Figure 3: Cutting height adjustment mechanism on the wheel, showing settings for 30mm, 40mm, and 50mm.
2. 芝刈り機の始動
- 芝刈り機を適切な電源コンセントに差し込みます。
- Press and hold the safety switch, then squeeze the operating lever. The motor will start.
- Release the safety switch while continuing to hold the operating lever to keep the lawnmower running.
3. 草刈り技術
- Push the lawnmower forward in overlapping strips.
- For best results, mow in straight lines and slightly overlap each pass.
- The mulching blade finely chops grass clippings, returning nutrients to the lawn. No grass collection bag is required for this model.
メンテナンス
定期的なメンテナンスにより、芝刈り機のパフォーマンスが最適化され、寿命が延びます。
- クリーニング： After each use, disconnect the power and use the included cleaning tool to remove grass clippings from the cutting deck and blade area. Wipe down the exterior with a damp 布。
- 刃の検査: Periodically check the mulching blade for sharpness and damage. A dull or damaged blade can lead to an uneven cut and strain the motor. Replace if necessary.
- ストレージ： Store the lawnmower in a dry, secure place, away from direct sunlight and extreme temperatures. The handle can be folded for compact storage.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 芝刈り機が始動しない | 電源が供給されていない、安全スイッチが作動していない、ケーブルが損傷している。 | Check power connection; Ensure safety switch and operating lever are pressed correctly; Inspect cable for damage and replace if necessary. |
| 不均一な切断 | Dull or damaged blade; Incorrect cutting height setting; Mowing too fast. | Sharpen or replace blade; Ensure all wheels are at the same cutting height; Mow at a slower, consistent pace. |
| 過度の振動 | ブレードの損傷またはバランスの崩れ、部品の緩み。 | ブレードに損傷がないか検査し、必要に応じて交換します。すべての留め具を確認し、必要に応じて締めます。 |
仕様
Figure 4: Dimensions of the VONROC Mini Electric Lawnmower.
| 特徴 | 詳細 |
|---|---|
| ブランド | ボンロック |
| モデル番号 | LM500_PARENT |
| 電源 | コード式電気 |
| 材料 | プラスチック |
| アイテム重量 | 4.7キログラム |
| 切断幅 | 22センチ |
| 動作モード | マニュアル |
| 製品寸法 (奥行き×幅×高さ) | 幅44.5cm x 奥行38cm x 高さ95cm |
| 組み立てが必要 | はい |
| 切断位置数 | 3 |
| Adjustable Cutting Height (Min/Max) | 30 Centimeters (30mm, 40mm, 50mm) |
保証とサポート
For warranty information and customer support, please refer to the documentation included with your product or visit the official VONROC webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。