導入
This manual provides essential instructions for the proper use and care of your Lamshaw Magnetic Replacement Charger, designed specifically for SANOTO DG08-H Bone Conduction Headphones. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
設定
To set up your magnetic charger, follow these simple steps:
- 充電器を開梱します。 Carefully remove the magnetic charging cable from its packaging.
- 電源に接続します： Insert the USB-A end of the charging cable into a compatible USB power adapter (not included), a computer USB port, or a power bank. Ensure the power source provides 5 Volts output.
- ヘッドフォンを準備する: Locate the charging port on your SANOTO DG08-H Bone Conduction Headphones.
- 磁気接続: Bring the magnetic charging head close to the charging port of your headphones. The magnets will automatically align and snap into place, establishing a secure connection.
Image: The magnetic charging head automatically aligns and connects to the charging port of the SANOTO DG08-H Bone Conduction Headphones, ensuring a stable connection.
操作手順
Using your Lamshaw magnetic charger is straightforward:
- 充電開始: Once the magnetic connection is established and the USB end is connected to a power source, your headphones will begin charging. Refer to your headphone's indicator lights for charging status.
- 安全な充電: The charger features a built-in smart IC chip and multi-protection systems to prevent over-charge, short-circuit, and temperature issues, ensuring safe and efficient charging for your device.
- 移植性: The compact and flexible design of the charging cable makes it easy to carry. It is suitable for use at home, in the office, during travel, or in your car.
Image: The charger's portable design allows for convenient use in various environments such as home, office, travel, and car.
Image: The charger incorporates a built-in smart IC and multi-protection systems to ensure safe charging, guarding against over-charge, short-circuits, and excessive temperatures.
メンテナンス
To ensure the longevity and optimal performance of your Lamshaw magnetic charger, follow these maintenance guidelines:
- 清潔に保ちます： Regularly wipe the magnetic contacts and cable with a dry, soft cloth to remove dust or debris. Avoid using liquids or abrasive cleaners.
- 適切な保管: When not in use, store the cable in a cool, dry place. The flexible PVC cable is designed for easy rolling and storage.
- 極端な曲げは避けてください: While the cable is designed for durability and has undergone bend tests (6000+), avoid sharp or excessive bending to prevent internal damage.
- 損傷の検査: ケーブルとコネクタに摩耗、ほつれ、損傷がないか定期的に点検してください。損傷が見られる場合は使用を中止してください。
Image: The charger features a reinforced design with multi-layer shielding for stability, a flexible PVC cable for easy handling, and pure copper probes for rapid and stable conduction.
画像: 詳細な view of the magnetic connector highlights the N52 strong magnets for secure attachment and the pure copper material used for efficient power transfer.
Image: The cable has undergone extensive bend testing (over 6000 cycles at 180 degrees) to ensure its durability and resistance to rupture.
トラブルシューティング
If you encounter issues with your charger, please refer to the following common solutions:
- ヘッドホンが充電されない:
- USB-A 端子が動作中の電源にしっかりと差し込まれていることを確認します。
- Verify that the magnetic charging head is properly aligned and connected to your headphones. The magnets should snap firmly into place.
- 別の USB 電源アダプタまたは USB ポートを試してください。
- Check if your headphones are functioning correctly with their original charger (if available).
- 遅い充電:
- Ensure your power source provides sufficient output (5 Volts, 1 Amp 推奨）。
- Clean the magnetic contacts on both the charger and headphones to ensure optimal conductivity.
- 磁気接続の問題:
- Ensure there is no debris or obstruction between the magnetic contacts.
- The charger uses N52 strong magnets for a secure connection; if the connection feels weak, inspect for damage.
問題が解決しない場合は、カスタマー サポートにお問い合わせください。
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | Lamshaw |
| 対応機種 | SANOTO DG08-H Bone Conduction Headphones |
| 入力ボリュームtage | 5ボルト |
| 出力巻tage | 5ボルト |
| 出力電流 | 1 Amps |
| ケーブル長さ | 3.93フィート / 100センチメートル |
| コネクタタイプ | Magnetic (to headphones), USB-A (to power source) |
| 保護機能 | Over-Charge Protection, Short-Circuit Protection, Temperature Protection |
| 材料 | ABS+PC, Flexible PVC Cable, Pure Copper Probes |
Image: This diagram illustrates the magnetic contact points, the flexible PVC cable material, and the total cable length of 3.93 feet (100 cm).
メーカーの連絡先情報
さらにサポートやお問い合わせが必要な場合は、製造元にお問い合わせください。
メーカー: Lamshaw
連絡先： Lamshaw (as per product details)
ご購入時の書類または販売店の web保証条件は異なる場合があるので、具体的な保証条件についてはサイトをご覧ください。