EENOUR HM2319

EENOUR HM2319 樹脂気泡除去剤 取扱説明書

Model: HM2319 | Brand: EENOUR

1. はじめに

This manual provides essential information for the safe and effective operation of your EENOUR HM2319 Resin Bubble Remover. Please read these instructions thoroughly before first use and retain for future reference. This device is designed to efficiently remove air bubbles from various resin types, ensuring crystal-clear results for your crafting projects.

安全上の注意

  • Always use the device on a stable, level surface.
  • Ensure the lid is securely latched before operating.
  • Do not pour resin directly into the bubble removing machine; always use appropriate containers.
  • お子様やペットの手の届かない場所に保管してください。
  • Disconnect from power when not in use or during cleaning.
  • デバイスを水や過度の湿気にさらさないでください。

2.製品オーバーview

The EENOUR HM2319 Resin Bubble Remover is an intelligent vacuum chamber designed for efficient bubble elimination in resin. It features high-vacuum technology and a user-friendly digital display.

主な特徴:

  • Effortless Bubble Removal: Utilizes -98kPa high vacuum technology for up to 99% bubble removal in 5 minutes with one-touch automation.
  • 大容量: Processes up to 3 x 8 oz (240 ml) cups or 1 x 32 oz (960 ml) cup of resin per cycle, with a total capacity of 3.4L (38oz).
  • Smart Digital Control Display: Provides real-time tracking of pressure levels and a customizable countdown timer (05:00 to 59:59).
  • Low Noise & Stable Operation: Operates at 58-61dB with an integrated non-slip silicone base to prevent spills.
  • 多用途なアプリケーション: Suitable for resin casting, jewelry making, sculpture crafting, landscape DIY, and model making.
  • 耐久性のある構造: Built with premium material for superior pressure and crack resistance.
  • ボーナスアクセサリー: Includes a removable silicone mat for easy cleaning in case of drips, and 10 measuring cups with ratio markings.

コンポーネント:

EENOUR HM2319 Resin Bubble Remover with cups
Figure 2.1: EENOUR HM2319 Resin Bubble Remover with included measuring cups, demonstrating before and after bubble removal.

This image shows the main unit of the EENOUR HM2319 Resin Bubble Remover, a purple and clear vacuum chamber. To its right, two clear cups illustrate the product's function: one cup contains resin with many bubbles, while the other shows clear, bubble-free resin, indicating the effectiveness of the remover.

EENOUR HM2319 Control Panel
Figure 2.2: Digital Control Display and Buttons.

クローズアップ view of the EENOUR HM2319's control panel, highlighting the digital display and control buttons. Labels point to the 'Switch', 'Start/Pause', 'Vacuum Level', 'Timer Display', 'Time Increase', and 'Time Decrease' buttons, illustrating the intuitive interface for operation.

Various resin art pieces created using the EENOUR HM2319
Figure 2.3: Versatile Applications of the Resin Bubble Remover.

This image showcases a variety of finished resin art pieces, including jewelry, decorative items, and molds, demonstrating the versatile applications of the EENOUR HM2319 Resin Bubble Remover in achieving clear, professional-grade results across different crafting projects.

EENOUR HM2319 with included silicone mat and measuring cups
図 2.4: 付属アクセサリ。

This image displays the EENOUR HM2319 Resin Bubble Remover along with its bonus accessories: a removable silicone mat for easy cleaning and multiple measuring cups with ratio markings, designed to enhance the user's workflow and ensure accurate resin mixing.

3. セットアップ

  1. 開梱： Carefully remove all components from the packaging. Verify that all accessories, including the silicone mat and measuring cups, are present.
  2. 配置: Place the EENOUR HM2319 on a stable, flat, and dry surface. Ensure adequate space around the unit for ventilation.
  3. 電源接続: Connect the power adapter to the device's power port and then plug it into a standard electrical outlet.
  4. 初期クリーニング: Before first use, wipe the interior of the vacuum chamber and the silicone mat with a damp 布。使用する前にすべての部品が乾いていることを確認してください。
EENOUR HM2319 Resin Bubble Remover and accessories in box
Figure 3.1: Unboxing the EENOUR HM2319 and accessories.

This image displays the EENOUR HM2319 Resin Bubble Remover alongside its packaging box and included accessories. The main unit is a purple and clear vacuum chamber. Next to it are two clear measuring cups (one with bubbles, one without) and a white silicone mat, all ready for use.

4. 操作手順

  1. Prepare Resin: Mix your resin components (e.g., resin A and B) thoroughly in one of the provided measuring cups. Ensure the resin is mixed according to its manufacturer's instructions. Bubbles will be present after mixing.
  2. Place Resin in Chamber: Open the lid of the EENOUR HM2319 by unlatching the side clips and lifting the top handle. Place the measuring cup containing the mixed resin onto the silicone mat inside the vacuum chamber.
  3. 安全な蓋: Close the lid firmly and ensure the side clips are securely latched.
  4. 接続電源： Plug the power cable into the designated port on the device.
  5. 電源オン: 電源ボタンを押します（⏻) to turn on the device. The digital display will illuminate.
  6. タイマーの設定： 上（▲）とダウン（▼) arrow buttons to set the desired vacuum time. The timer can be adjusted from 5 minutes to 59 minutes and 59 seconds (05:00 to 59:59). A typical cycle for most resins is 5 minutes.
  7. 掃除機を起動: スタート/一時停止ボタン (▶‖) to begin the bubble removal process. The vacuum level (kPa) and countdown timer will be displayed. You will observe bubbles rising and bursting in the resin.
  8. 監視プロセス: The transparent chamber allows you to monitor the bubble removal. If the resin rises significantly, you may pause the process by pressing the Start/Pause button, wait for it to settle, and then resume.
  9. 完了： Once the timer reaches zero, the device will automatically stop.
  10. 解放圧力: Gently press the pressure release valve on the top of the lid to equalize the pressure inside the chamber. You will hear a hissing sound as air enters.
  11. Remove Resin: Once the pressure is fully released, unlatch the clips, open the lid, and carefully remove your bubble-free resin.
Resin before and after bubble removal
Figure 4.1: Visual comparison of resin before and after bubble removal.

This image visually demonstrates the effectiveness of the EENOUR HM2319. On the left, a resin art piece is filled with numerous small bubbles, appearing cloudy. On the right, the same art piece is crystal clear and bubble-free after processing, highlighting the product's ability to achieve flawless results.

EENOUR HM2319 showing -98kPa vacuum
Figure 4.2: High vacuum technology in action.

内部の view of the EENOUR HM2319 vacuum chamber, illustrating the powerful -98kPa vacuum technology. Bubbles are visibly being drawn out of the resin, showcasing the high-performance bubble elimination system at work.

EENOUR HM2319 with time setting range
Figure 4.3: Adjustable Smart Timing.

This image highlights the adjustable smart timing feature of the EENOUR HM2319. A hand is shown interacting with the digital control panel, which displays a time setting of "05:00". The visual emphasizes the ease of customizing the vacuum duration for different resin volumes and viscosities.

Official Product Video: EENOUR Resin Bubble Remover in Use

This video demonstrates the EENOUR Resin Bubble Remover in action, showcasing the process from mixing resin to placing it in the vacuum chamber, operating the device, and revealing the final bubble-free result. It highlights the ease of use and the effectiveness of the high-vacuum technology for various resin projects.

5. メンテナンス

  • クリーニング： After each use, wipe the interior of the vacuum chamber and the silicone mat with a soft, damp cloth. For resin spills, allow the resin to cure on the silicone mat, then peel it off. Do not use abrasive cleaners or solvents.
  • ストレージ： デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
  • シリコンマット： The removable silicone mat is designed for easy cleaning in case of drips or spills.

6。 トラブルシューティング

問題考えられる原因解決
デバイスの電源が入りません。電源ケーブルが接続されていない、電源コンセントに問題があります。電源ケーブルがしっかりと差し込まれていることを確認してください。別のデバイスでコンセントをテストしてください。
Bubbles not fully removed.Insufficient vacuum time, resin too viscous, overfilled container.Increase vacuum time. Ensure resin is within recommended viscosity. Do not overfill cups (fill only 1/2 full to prevent overflow). After degassing, any remaining surface bubbles can be removed with alcohol spray, a heat gun, or by letting the resin rest.
Resin overflows during vacuum.Container overfilled.Reduce the amount of resin in the container. Fill cups only 1/2 full.
デバイスにノイズがあります。Normal operation sound, unstable surface.The device operates at a low noise level (58-61dB). Ensure it is on a stable surface; the non-slip silicone base helps reduce vibration.

7. 仕様

  • モデル番号: HM2319
  • ブランド： イーノア
  • 製品寸法: 7.52 x 7.52 x 11.81インチ
  • 商品の重量: 4.54ポンド
  • 真空圧： -98kPa
  • 容量： Up to 3.4L (38oz)
  • タイマー範囲： 05:00 - 59:59 minutes
  • 騒音レベル: 58～61dB
  • メーカー: イーノア
  • ASIN: B0F2981FDS
  • 発売日: 1年2025月XNUMX日
EENOUR HM2319 showing 3.4L capacity
Figure 7.1: Large Capacity for Resin Projects.

This image highlights the large capacity of the EENOUR HM2319, capable of processing up to 3.4 liters (38 oz) of resin at once. The clear chamber contains a measuring cup filled with resin, surrounded by various resin art pieces like flowers and butterflies, illustrating its suitability for diverse projects.

8. 保証とサポート

EENOUR offers a 100% Satisfaction Guarantee. For optimal performance, please consult this instruction manual before initial use. Should you have any questions or encounter issues, our 24/7 customer support team is available to assist you and ensure your complete satisfaction.

For support, please refer to the contact information provided with your product or visit the official EENOUR webサイト。

© 2025 EENOUR. 無断複写・転載を禁じます。