Herture PG12XYB

Herture 45-67 Gallon Reptile Tank Stand with Power Outlet (Model PG12XYB) - Instruction Manual

Your guide to assembly, features, and maintenance.

1. はじめに

Thank you for choosing the Herture 45-67 Gallon Reptile Tank Stand with Power Outlet (Model PG12XYB). This stand is designed to provide a stable and functional base for your reptile terrarium, offering convenient storage and integrated power solutions. Please read this manual thoroughly before assembly and use to ensure proper setup and safe operation.

Herture 45-67 Gallon Reptile Tank Stand with Power Outlet
Figure 1: Herture 45-67 Gallon Reptile Tank Stand with Power Outlet, showcasinデザインと機能性に優れています。

2. 安全情報

  • 重量制限: Do not exceed the maximum weight limit of 600 lbs on the tabletop. Overloading can cause structural failure and injury.
  • 鋭利な物体: Exercise caution around sharp objects and heavy items when handling the reptile tank and accessories.
  • 大人の集会: 組み立ては大人の方が行ってください。
  • 安定した表面: Always place the stand on a flat, level, and stable surface to prevent tipping.
  • 電源コンセントの安全性: Ensure all electrical connections to the built-in power outlet are secure and meet local electrical codes. Do not overload the power strip.
  • 子供とペット: Keep children and pets away from the assembly area and ensure the stand is fully assembled and stable before placing any animals or equipment on it.
  • 換気: Ensure adequate ventilation around the stand and terrarium to prevent overheating of electrical components.

3 製品の特徴

The Herture Reptile Tank Stand is designed with both functionality and aesthetics in mind, providing a secure and organized environment for your reptile pets.

  • Optimal Tank Compatibility: Specifically designed for 45-67 gallon reptile tanks, with a tabletop measuring 24 x 18 inches.
  • 堅牢な構造: Made from high-quality MDF panels and a sturdy iron frame, capable of supporting up to 600 lbs.
  • 統合電源コンセント: Features a built-in power outlet for convenient connection of heating pads, lighting, and other essential habitat equipment.
  • Ampファイルストレージ: Includes a left cabinet and an upper shelf for organizing reptile accessories, health supplies, and habitat decor.
  • Multi-Tier Habitat Option: A dedicated right-side lower section (10.8" x 14.96") can accommodate a smaller reptile tank, creating a multi-level setup.
  • 調節可能な足: 調整可能な脚が付いているので、平らでない表面でも安定性を確保します。
  • FSC認証木材: Desktop and cabinet are made out of FSC-Certified wood, promoting responsible forest management.
Reptile Tank Stand with Storage Cabinet and Terrarium
Figure 2: The stand features a spacious storage cabinet and a dedicated space for a smaller terrarium.
Close-up of Reptile Tank Stand features: Power Outlet, Adjustable Feet, Storage
図3:詳細 view of the built-in power socket, adjustable feet, and storage compartments.

4. 仕様

属性詳細
ブランドヘーチュア
モデル名Reptile Tank Stand
商品型番PG12XYB
サイズ24x18" - 46-67 Gallon
材料Metal, Wood (MDF panels, Iron frame)
製品寸法(長さx幅x高さ)24.4 x 18.5 x 30.7インチ
アイテム重量40.4 ポンド (18.37 キログラム)
棚の数2
特集Built-in Power Outlet, Adjustable Feet
最大重量容量600ポンド
Detailed dimensions of the Herture Reptile Tank Stand
Figure 4: Detailed dimensions of the Herture Reptile Tank Stand (Model PG12XYB).

5. セットアップと組み立て

Please follow the instructions carefully. It is recommended to have two adults for assembly. Ensure all parts are present before beginning.

5.1 組み立てビデオガイド

Video 1: Assembly instructions for a similar terrarium stand with a power outlet. This video demonstrates the general steps for putting together such a unit, including attaching panels, securing components, and installing the power strip. While the brand shown is GDLF, the assembly process is highly relevant to the Herture stand.

5.2 General Assembly Steps (Refer to included manual for detailed diagrams)

  1. コンポーネントを解凍します: Carefully unpack all parts and hardware. Verify against the parts list in your included manual.
  2. ベースフレームを組み立てる: Connect the base frame components using the provided screws and tools. Ensure all connections are tight and secure.
  3. サイドパネルを取り付ける: Secure the side panels to the base frame. Pay attention to the orientation of panels with pre-drilled holes for the power outlet.
  4. 棚の取り付け: Insert the internal shelves into their designated slots or attach them with hardware as per the manual.
  5. キャビネットのドアを取り付ける: Attach the cabinet doors using the hinges and ensure they open and close smoothly. Install any latches or handles.
  6. 電源コンセントの取り付け: Secure the built-in power outlet to its designated location, typically on an inner side panel. Ensure the power cord is routed safely.
  7. トップパネルを取り付ける: Place and secure the top panel of the stand.
  8. 調整可能な脚を取り付ける: Screw the adjustable feet into the bottom of the stand. Adjust them to level the stand on your chosen surface.
  9. 最終検査: Double-check all screws and connections to ensure the stand is stable and secure before placing any weight on it.

6. 操作

6.1 電源コンセントの使用

  • スタンドの電源コードをアース付き電源コンセントに差し込みます。
  • Use the integrated power strip to connect your reptile's heating pads, lighting, and other electrical equipment.
  • 最大ワット数を超えないでくださいtage rating of the power strip. Consult the power strip's label for specific limits.
  • Ensure all cables are neatly organized and not pinched or exposed to water.

6.2 ストレージの活用

  • The left cabinet and upper shelf provide space for storing reptile food, supplements, cleaning supplies, and decorative items.
  • The right-side lower section is designed to house a smaller terrarium (approximately 10.8" x 14.96"), creating a multi-level habitat.
  • Keep heavy items on lower shelves to maintain stability.

7. メンテナンス

  • クリーニング: 柔らかい布でスタンドを拭きますdamp 布で拭いてください。仕上げを傷める可能性のある、刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
  • こぼれ: Immediately clean up any water spills to prevent damage to the wood.
  • ハードウェアチェック: すべてのネジと接続部がしっかりと締まっているか定期的に確認してください。必要に応じて締め直してください。
  • 電源コンセント: Inspect the power outlet and cord for any signs of wear or damage. Replace if necessary.
  • 調節可能な足: Re-adjust the feet as needed to maintain a level surface for your terrarium.

8。 トラブルシューティング

  • スタンドがぐらぐらする:
    • スタンドが平らで水平な面にあることを確認してください。
    • スタンドの底にある水平調整脚を安定するまで調整します。
    • Check all assembly screws and tighten any loose ones.
  • 電源コンセントが機能しない:
    • Verify the stand's main power cord is securely plugged into a working wall outlet.
    • Check if the power strip's ON/OFF switch is in the "ON" position.
    • Ensure the wall outlet itself is functional by testing with another device.
    • Do not overload the power strip; unplug some devices if necessary.
  • キャビネットのドアがきちんと閉まらない:
    • ヒンジの位置が適切で、しっかりと締まっているか確認します。
    • キャビネット内の物がドアを塞いでいないことを確認してください。

9.保証とサポート

For specific warranty information regarding your Herture Reptile Tank Stand, please refer to the documentation included with your purchase or contact Herture customer support directly. Keep your proof of purchase for any warranty claims.

Additional protection plans may be available for purchase through your retailer. These plans typically offer extended coverage beyond the manufacturer's warranty.

© 2026 Herture. All rights reserved. Model PG12XYB.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.