導入
The Orbit 67100 Multi-Stream Drip Emitter is designed for precise micro-watering in various garden settings. It delivers a gentle, full-pattern multi-stream spray, ideal for annuals, shrubs, perennials, or container plants. This emitter allows for adjustable water flow to suit specific plant needs and conserve water.
製品終了view
The multi-stream drip emitter features a 1/4-inch barb inlet for direct connection to 1/4-inch drip tubing. It also includes a 10-32 male thread (MT) for optional connection to drip stakes. The emitter's head is adjustable, allowing users to control the spray radius and flow rate.
Image: The Orbit 67100 Multi-Stream Drip Emitter, a black plastic component with a ribbed top and a barb connection at the bottom. The top surface shows markings for flow adjustment.
主な特徴:
- Precise micro-watering for various plants.
- Multiple streams provide gentle flow for efficient soak-in.
- Adjustable flow control to customize water application rates.
- Dual connection options: 10-32 male thread and 1/4-inch barb.
- Compatible with B-hyve smart controllers for water conservation.
セットアップとインストール
- チューブを準備する: Ensure your 1/4-inch drip tubing is cut to the desired length and free of debris.
- Connect to Tubing: Push the 1/4-inch barb inlet of the emitter directly into the end of the 1/4-inch drip tubing. For easier insertion, you may briefly warm the end of the tubing in warm water.
- Optional Drip Stake Connection: If using a drip stake, connect the 10-32 male thread of the emitter to a drip stake with a 10-32 female thread.
- 配置: Position the emitter near the base of the plant you wish to water. Use a drip tubing Y-anchor stake if needed to secure the emitter in place.
- 水源接続: Connect the 1/4-inch drip tubing to your main drip manifold, a 1/2-inch drip tubing lateral line, or directly to a hose faucet using a 1/4-inch hose faucet adapter.
- システムチェック: Before final operation, briefly turn on the water supply to check for leaks and proper emitter function.
操作手順
The Orbit 67100 Multi-Stream Drip Emitter allows for easy adjustment of water flow and spray radius.
水の流れを調整する:
The top of the emitter features a rotating head with markings for adjustment. To decrease the spray radius and water flow, rotate the multi-stream head clockwise towards the "minus" symbol. To increase the spray radius and water flow, rotate the head counter-clockwise towards the "plus" symbol. You can also shut off the flow completely by rotating it fully clockwise.
The recommended operating pressure for this emitter is 30 PSI. For optimal water conservation, consider integrating the system with an Orbit B-hyve smart controller.
メンテナンス
- 定期点検: Periodically check emitters for clogs or damage.
- クリーニング： If an emitter becomes clogged, gently remove it from the tubing and rinse it under running water. A small brush can be used to clear any debris from the nozzles.
- 冬季： In freezing climates, disconnect and drain your irrigation system, including emitters, to prevent damage from ice expansion.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 水の流れがない、または流量が減少する | Clogged emitter; insufficient water pressure; emitter turned off. | Clean the emitter; check water supply pressure; rotate emitter head to increase flow. |
| 接続点からの漏れ | Improperly seated tubing; damaged barb. | Ensure tubing is fully pushed onto the barb; replace emitter if barb is damaged. |
| 不均一なスプレーパターン | Partial clog; incorrect adjustment. | Clean the emitter nozzles; adjust the emitter head for desired pattern. |
仕様
- モデル： 67100
- ブランド： 軌道
- 材料： プラスチック
- 色： 黒
- 入口タイプ: 1/4" Barb and 10-32 Male Thread (MT)
- スプレーパターン: Multi-Stream, Full Pattern
- Maximum Spray Radius: Up to 3 feet (at 30 PSI)
- 推奨動作圧力： 30PSI
- 寸法（長さ×幅×高さ）： 1 x 1 x 1インチ
- 商品の重量: 1 pounds (for a single unit, though sold in packs)
- 使用法： Outdoor irrigation with cold water only
保証とサポート
保証情報やテクニカルサポートについては、Orbitの公式ウェブサイトをご覧ください。 web公式サイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証請求のために購入時のレシートを保管してください。
連絡先： ぜひご覧ください AmazonのOrbit Store or the official Orbit web最新のサポート詳細については、サイトをご覧ください。