FOHERE 300A-S

FOHERE Commercial Slushy Machine 8Gal/30L (Model 300A-S) Instruction Manual

1. はじめに

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your FOHERE Commercial Slushy Machine, Model 300A-S. Please read all instructions carefully before use and retain this manual for future reference.

2. 重要な安全上の注意事項

  • 機械が安定した水平な面に設置されていることを常に確認してください。
  • コードやプラグが損傷している状態で機械を操作しないでください。
  • 操作中は可動部分に手を近づけないでください。
  • 清掃やメンテナンスを行う前に、マシンのプラグを抜いてください。
  • 過熱を防ぐために、機械の周囲に適切な換気を確保してください。
  • Minimum sugar content in liquid must not be less than 13%. For liquids with alcohol, the temperature needs to be set around -9°C.
  • Always add liquid over the white plastic beater (minimum water level).

3. パッケージ内容

Your FOHERE Commercial Slushy Machine package includes:

  • Commercial Slushy Machine (Main Unit)
  • Dual 15L Food-Grade Tanks with Lids
  • Helical Augers (Mixing Shafts)
  • ドリップトレイ
  • 取扱説明書

4. セットアップ手順

4.1開梱と配置

Carefully remove all packaging materials. Place the machine on a sturdy, level countertop with adequate ventilation space around it.

4.2 組み立て

Before first use, ensure all removable parts are clean and properly assembled.

  1. Place the sealing ring onto the stainless steel cylinder.
  2. Insert the stainless steel cylinder into the tank.
  3. Attach the helical auger onto the shaft inside the cylinder.
  4. Push the tank firmly onto the base, ensuring it aligns with the seal.
  5. Place the lid securely on top of the tank.
  6. 注ぎ口の下にドリップトレイを取り付けます。
ビデオ： Assembly of the slush machine. This video demonstrates the correct steps for assembling the tanks, augers, and lids onto the main unit.

5. 操作手順

5.1 タンクの充填

Open the tank lids and pour your desired beverage mixture into each tank. Ensure the liquid level is above the minimum water level mark on the tank to prevent damage to the machine. Close the lids securely.

FOHERE Commercial Slushy Machine with a person pouring liquid into the tanks.
画像： Easy-fill tanks. This image shows the transparent tanks being filled with liquid, highlighting the convenience of refilling.

5.2コントロールパネルオーバーview

The control panel allows you to manage the machine's functions. It features buttons for mixing, cold drink mode, slush mode, lighting, and temperature settings.

ビデオ： Control Panel Description and Function (Single Tank). This segment explains the various buttons and their functions on the control panel for a single-tank machine, which is similar to the dual-tank model's individual controls.
ビデオ： Control Panel Description and Function (Dual Tank). This segment details the control panel operations for a dual-tank machine, including individual tank controls.

5.3 スラッシュ/冷たい飲み物を作る

  1. Ensure the machine is plugged in and the power switch is ON.
  2. Press the 'MIXING' key to activate the mixing function for each tank.
  3. Select 'SLUSH' mode for frozen beverages or 'COLDDRINK' mode for chilled beverages.
  4. Adjust the temperature using the 'TEMPSETTING' or 'SET' and 'ADD/SUBTRACT' keys as needed.
  5. Wait for the machine to reach the desired consistency (approx. 25-30 minutes for slushies).
  6. Dispense by pulling the handle on the front of each tank.
FOHERE Commercial Slushy Machine with a person dispensing a drink.
画像： Self-serve handle with drip-free pour spout. This image illustrates the ergonomic design of the handle for convenient and mess-free dispensing.

5.4 Adjusting Minimum Temperature

To adjust the minimum temperature for slush mode:

  1. Press 'SET' and 'ADD' simultaneously until 'P00' appears on the screen. Release both buttons.
  2. Press 'LIGHTING' to cycle through 'P00' to 'P02'.
  3. Once 'P02' is displayed, press 'SUBTRACT' to adjust the temperature to -15°C.
  4. The machine will automatically save the setting after a few seconds of inactivity.
ビデオ： How to Adjust Minimum Temperature for Slush Machine. This video demonstrates the steps to access and modify the minimum temperature setting on the control panel.

6. メンテナンス

6.1毎日の清掃

  1. Turn off the slush function and dispense any remaining material.
  2. Pour water into the tanks and stir for approximately 1 minute, then drain the water.
  3. Turn off the lighting and mixing functions, then switch off the main power.
ビデオ： How to Clean Slush Machine. This video demonstrates the daily cleaning process for the slush machine.

6.2 徹底的なクリーニング

For deep cleaning, disassemble the tanks, augers, and seals. Wash them thoroughly with detergent and warm water. Ensure all parts are completely dry before reassembly.

6.3 シールの交換

If you notice any leakage, the seals may need replacement. Remove the pin and piston from the dispensing handle, take off the old seal, and replace it with a new one. Reinstall the components.

ビデオ： Replacement of Seals. This video guides you through the process of replacing the seals on the dispensing mechanism.

6.4 Handle Replacement

To replace a damaged handle, first remove the existing handle by pressing the pin. Check the seal for damage and replace if necessary. Install the new handle by aligning the pin and pushing it into place.

ビデオ： Replacement of the Handle. This video demonstrates how to remove and replace the dispensing handle.

6.5 Motor and Shaft Replacement

If the motor or shaft requires replacement, carefully unscrew the back panel and the motor screws. Disconnect the old motor and install the new one, ensuring all connections are secure.

ビデオ： Replacement of Motor and Shaft. This video provides detailed instructions for replacing the motor and shaft components.

6.6 Temperature Sensor Replacement

To replace the temperature sensor, unscrew the side panel, unplug the old sensor wire, and carefully remove the sensor. Install the new sensor and reconnect the wiring.

7。 トラブルシューティング

問題考えられる原因と解決策
Error Code "LLL"Indicates a low voltage alert. Check the operating voltage. If regular, contact after-sales service.
Mixture LeakageRemove the material cylinder and mixing shaft. Adjust the placement of the sealing ring or use a new one. Ensure the material cylinder is pressed against the seal and the front is jammed to prevent dislodging.
Display Does Not Light Up (Powered On)Check the wires connecting to the plastic switch for looseness. Re-check wires on the power switch for looseness. Confirm motherboard wires are secure. Check connecting wires between motherboard and display.
Display Shows 'rh'This error indicates a potential issue with the solenoid valve. Remove the screw on the solenoid valve with a screwdriver and energize the machine. Lift the solenoid valve upward by hand; normally there is resistance and a “zip” sound. If it lifts easily and makes no sound, it's faulty. (Note: Test must be conducted with the display energized to be effective).
Machine Can't MixCheck the 3 wires on the motherboard for looseness or disconnection. Open the black rear cover panel and check the wires on the motor for any dislodged connections; try plugging them back in.
1 or 2 Tanks Not Dropping TemperatureLocate the 2 wires on the motherboard for the affected tank and check for loose or disconnected wires.
Fan Blades Not Turning in 'SLUSH' ModeLocate the 2 wires for the fan on the motherboard and check for loose or disconnected wires.
No Start-Up Sound from Compressor in 'SLUSH' ModeLocate the 2 wires for the compressor on the motherboard and check for loose or disconnected wires.
ビデオ： Comprehensive Troubleshooting Guide. This video covers various troubleshooting steps for common issues, including electrical problems, leakage, and component replacements.

8. 仕様

特徴詳細
ブランドフォヒア
モデル番号300A-S
色銀
容量30 Liters (2 x 15L Tanks)
材料ステンレス鋼
含まれるコンポーネントスラッシーマシン
商品の寸法 (長さ x 幅 x 高さ)長さ21.65インチ x 幅16.3インチ x 高さ32.28インチ
アイテム重量134.92 ポンド
操作モード自動
製品のお手入れ方法手洗い

9. 保証とサポート

The FOHERE Commercial Slushy Machine is ETL certified and approved for commercial use, ensuring high quality and reliability. For any issues or support, please refer to the troubleshooting section or contact FOHERE customer service. Warranty details are typically provided with your purchase documentation.

連絡先： Please refer to your product packaging or the official FOHERE web最新のカスタマー サポートの連絡先の詳細については、こちらのサイトをご覧ください。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.