1. はじめに
Thank you for choosing the CREWORKS 10L Digital Ultrasonic Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your ultrasonic cleaner. Please read it thoroughly before use and retain it for future reference.
This ultrasonic cleaner utilizes high-frequency sound waves to create cavitation bubbles in a cleaning solution. These bubbles gently yet powerfully scrub surfaces, removing dirt, grime, and contaminants from various items without harsh chemicals or abrasive scrubbing. It is ideal for industrial applications, cleaning engine parts, tools, jewelry, and more.
Image 1.1: The CREWORKS 10L Digital Ultrasonic Cleaner with its accompanying heavy-duty cleaning and degreaser solution.
2. 安全に関する注意事項
警告: これらの安全指示に従わなかった場合、感電、火災、または重傷を負う可能性があります。
- しないでください ユニットを分解しないでください。すべての修理は資格のある担当者に依頼してください。
- しないでください operate the unit without sufficient liquid in the tank. Ensure the liquid level is above the MIN mark.
- いつも use sufficient fluid to cover the items being cleaned.
- しないでください immerse the main unit in water or other liquids.
- しないでください let items to be cleaned directly touch the bottom of the tank. Always use the cleaning basket.
- ユニットが安定した水平な面に設置されていることを確認してください。
- Unplug the unit from the power outlet when not in use, before cleaning, or when filling/draining the tank.
- お子様の手の届かない場所に保管してください。
- Use only recommended cleaning solutions. Avoid flammable or corrosive liquids.
- In case of eye contact with cleaning solution, rinse immediately with water and seek medical attention.
3.製品コンポーネント
The CREWORKS 10L Digital Ultrasonic Cleaner typically includes the following components:
- Main Ultrasonic Cleaner Unit with Digital Control Panel
- Stainless Steel Cleaning Tank (10L capacity)
- ステンレス蓋
- クリーニングバスケット
- 電源コード
- CREWORKS Heavy Duty Cleaner & Degreaser Solution (34 fl. oz. / 1000 mL)
4. セットアップ
- 開梱: すべての部品をパッケージから慎重に取り出し、損傷がないか確認してください。
- 配置: Place the ultrasonic cleaner on a firm, level, and dry surface. Ensure there is adequate ventilation around the unit.
- タンクの充填: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the 'MIN' and 'MAX' marks, and that items to be cleaned will be fully submerged.
- 電源接続: 電源コードをアース付きコンセントに差し込みます。デジタルディスプレイが点灯します。
5. 操作
5.1コントロールパネルオーバーview
Image 5.1: The intuitive control panel allows for easy adjustment of time and temperature.
The digital control panel features settings for temperature, timer, Degas mode, and Gentle mode.
5.2 設定温度
- Press the 'TEMP' button to activate temperature setting.
- Use the 'UP' and 'DOWN' arrows to adjust the desired temperature (range: 32-176°F / 0-80°C).
- The heater will automatically activate to reach the set temperature.
5.3 タイマーの設定
- Press the 'TIME' button to activate timer setting.
- Use the 'UP' and 'DOWN' arrows to adjust the desired cleaning time (range: 1-30 minutes).
5.4 Using Degas Mode
Image 5.2: Degassing mode removes dissolved gases, while Gentle mode protects delicate items.
The Degas mode is designed to remove dissolved gases from the cleaning solution, which can interfere with ultrasonic cavitation. This enhances cleaning efficiency, especially with fresh solutions.
- Press the 'DEGAS' button to activate this mode.
- Run Degas mode for a few minutes before placing items for optimal cleaning.
5.5 Using Gentle Mode
The Gentle mode reduces the intensity of the ultrasonic waves, providing a less aggressive cleaning action suitable for delicate or sensitive items.
- Press the 'GENTLE' button to activate this mode.
- Use for items that may be susceptible to damage from full-power ultrasonic cleaning.
5.6 クリーニングの開始と停止
- Place items to be cleaned into the cleaning basket. Ensure items do not touch the bottom of the tank.
- Lower the basket into the tank, ensuring items are fully submerged.
- 蓋を閉めてください。
- Press the 'ON/OFF' button to start the ultrasonic cleaning process.
- The unit will automatically stop when the set time expires. You can manually stop it at any time by pressing the 'ON/OFF' button again.
- After cleaning, carefully lift the basket and rinse the cleaned items with clean water.
Image 5.3: Illustration of ultrasonic cavitation, the mechanism behind the cleaner's powerful action.
6. Using the CREWORKS Heavy Duty Cleaner & Degreaser Solution
The included CREWORKS Heavy Duty Cleaner & Degreaser Solution is formulated to work effectively with your ultrasonic cleaner for optimal results.
Image 6.1: Features of the CREWORKS Heavy Duty Cleaner & Degreaser Solution.
6.1 希釈手順
- This is a highly concentrated solution. Dilute at a 1:10 ratio with water例えばample, for 10 liters of water, use 1 liter of solution.
- Always add water to the tank first, then carefully add the concentrated solution.
6.2 推奨アプリケーション
Image 6.2: The multipurpose cleaner is suitable for a wide range of items.
The solution is effective for cleaning a variety of items, including:
- Engine parts, carburetors, valves
- Tools, gun parts, metals
- Electronic components (ensure they are safe for liquid immersion)
- Bicycle chains, plastics (check material compatibility)
6.3 Benefits of the Solution
Image 6.3: The cleaning solution provides thorough cleaning for various contaminants.
This solution is designed to tackle:
- Grease buildup and oil
- Persistent residues
- 頑固な汚れ
- Dirt in tight corners and intricate parts
Image 6.4: Visible cleaning effects on a bicycle chain and various metal parts after using the CREWORKS solution.
Image 6.5: Before and after comparisons showcasing the cleaner's effectiveness on various items.
7. メンテナンス
7.1 タンクの排水
- After each use, or when the solution becomes visibly dirty, unplug the unit.
- Carefully drain the solution using the drain valve located on the side of the unit. Dispose of the used solution according to local regulations.
7.2 ユニットのクリーニング
- 本体の外側を柔らかい布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤を使用したり、本体を水に浸したりしないでください。
- Rinse the stainless steel tank with clean water and wipe dry.
7.3 ストレージ
- 超音波洗浄機は直射日光や湿気を避け、涼しく乾燥した場所に保管してください。
- Ensure the tank is empty and dry before storage.
8。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ユニットの電源が入りません。 | 電源コードが正しく接続されていないため、コンセントから電力が供給されません。 | 電源コードの接続を確認し、別のデバイスでコンセントをテストします。 |
| 超音波機能が動作しません。 | Timer not set; unit not started; insufficient liquid. | Set timer and press ON/OFF; ensure liquid level is adequate. |
| 洗浄結果が悪い。 | Incorrect cleaning solution; improper dilution; items too crowded; solution too old; Degas mode not used. | Use appropriate solution and dilution; clean fewer items at a time; replace old solution; use Degas mode. |
| 加熱機能が動作しません。 | Temperature not set; heater malfunction. | Set desired temperature; if problem persists, contact support. |
9. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル | 10Lデジタル超音波洗浄機 |
| タンク容量 | 10リットル |
| 超音波パワー | 240W |
| 火力 | 300W |
| 超音波周波数 | 40kHz |
| 温度範囲 | 32〜176°F（0〜80°C） |
| タイマー範囲 | 1～30分 |
| Solution Capacity (Included) | 34fl。 オズ。 （1000 mL） |
| ASIN | B0DYHT6DBQ |
10. 保証とサポート
CREWORKS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official CREWORKS webサイトをご覧ください。サポートにお問い合わせの際は、モデル番号と購入日をご用意ください。