RESTMO Sprinkler Timer (Model O-HT-1AW) Instruction Manual

導入

This manual provides detailed instructions for the setup, programming, and operation of your RESTMO Sprinkler Timer, Model O-HT-1AW. Please read this manual thoroughly before use to ensure proper function and longevity of the device.

Image: RESTMO Sprinkler Timer, Model O-HT-1AW, connected to a garden faucet and hose, ready for use.

主な特徴

• 3 Independent Programs: Customize start times, durations (1 min - 4 hrs 59 mins), and frequencies (specific days) for diverse watering needs.
• Weekly Schedule Mode: Set exact days and times for irrigation, ideal for specific plant care or local watering regulations.
• Upgraded Waterproof & Durability: Seamless embedded screen prevents water ingress, and a rugged textured panel ensures longevity. IP55 waterproof protection.
• 雨天遅延モード: Suspend watering for 24, 48, or 72 hours without losing programmed settings.
• 手動散水モード: Initiate immediate watering from 1 minute to 299 minutes.
• 簡単なセットアップ: Oversized dial and large LCD screen for intuitive programming and monitoring.
• 互換性: Single outlet with solenoid valve, fitting for 3/4" hose and faucet. Operates with 8-120 psi water pressure.

Image: Visual representation of the timer's main features, including timed watering, manual control, rain delay, and waterproof design.

セットアップガイド

1. バッテリーの取り付け

The timer requires 2 x AAA Alkaline Batteries (not included). Ensure your hands are dry when handling batteries and the battery compartment to prevent moisture ingress.

1. Open the waterproof battery compartment cover located on the back of the timer.
2. Insert two fresh AAA alkaline batteries, observing the correct polarity (+/-).
3. Securely close the battery compartment cover to maintain its waterproof seal.

2. タイマーの接続

Connect the timer to your outdoor faucet and garden hose.

1. Screw the timer's inlet (top connection) onto a standard 3/4" outdoor faucet. Ensure the built-in metal filter is in place to prevent debris from entering the timer.
2. Screw your garden hose onto the timer's outlet (bottom connection).
3. Tighten all connections by hand to prevent leaks. Do not overtighten.

Image: The sprinkler timer installed on a faucet with hoses attached, illustrating proper connection.

3. 時計の設定

1. ダイヤルを回して 時計を設定する.
2. 使用 + / - buttons to set the current time (hour and minute).
3. を押す OK 時間と分の設定を切り替えるボタン。
4. Turn the dial to another position (e.g., ON) to save the changes.

Programming Watering Schedules

The timer features three independent programs (P1, P2, P3). Each program can be set with a unique start time, duration, and watering days.

画像: オーバーview of the three independent programming options (P1, P2, P3) and their customizable settings.

Setting Program 1 (P1)

1. ダイヤルを回して P1.
2. 使用 + / - 設定するボタン 開始時間。 プレス OK to confirm and move to どのぐらいの間.
3. 使用 + / - buttons to set the watering どのぐらいの間 (duration). Press OK to confirm and move to 水の日.
4. 使用 + button to select desired watering days and the - button to unselect days.
5. Turn the dial to another position (e.g., ON) to save the changes.

Setting Program 2 (P2)

Follow the same steps as Program 1, but turn the dial to P2 to set its independent schedule.

Setting Program 3 (P3)

Follow the same steps as Program 1, but turn the dial to P3 to set its independent schedule. To turn P3 off, keep pressing the - button until 'OFF' is displayed for the watering days.

動作モード

自動散水

Once programs are set, turn the dial to ON to activate automatic watering. The LCD screen will flash between the next watering start time and the current time when watering is OFF. When watering is ON, the LCD screen displays the remaining time of the current watering program.

手動散水

To initiate manual watering:

1. With the dial at ON and the timer not actively watering, long press the OK MANUAL ボタンを3秒間押し続けます。
2. 使用 + / - buttons to select the desired watering duration (1 min to 299 mins).
3. を押す OK button to start manual watering.
4. To cancel manual watering, turn the dial to オフ そしてまた ON.

雨による散水遅延

To temporarily pause scheduled watering due to rain:

1. With the dial at ON and the timer not actively watering, long press the 遅れ ボタンを3秒間押し続けます。
2. 使用 + / - ボタンを使用して、24 時間、48 時間、または 72 時間の遅延を選択します。
3. を押す OK button or wait for 3 seconds for the rain delay to start automatically.
4. To cancel rain delay, turn the dial to オフ そしてまた ON.

Image: The timer's display showing the rain delay function, allowing selection of 24, 48, or 72-hour delays.

メンテナンス

Cleaning the Filter Washer

The timer includes a built-in metal filter to prevent debris from entering the system. Periodically check and clean this filter to ensure optimal water flow and prevent blockages.

1. 蛇口への給水を止めてください。
2. Unscrew the timer from the faucet.
3. 入口からフィルターワッシャーを取り外します。
4. フィルターを流水で洗い流し、蓄積したゴミを取り除きます。
5. Reinsert the clean filter washer and reattach the timer to the faucet.

冬季保管

During freezing temperatures, remove the timer from the faucet and store it indoors to prevent damage from ice expansion.

トラブルシューティング

• 水の流れがない: Check if the faucet is fully open. Ensure the filter washer is clean and not blocked. Verify that the timer is set to ON and a program is active or manual watering is engaged.
• Timer not turning on/off: Check battery levels and replace if necessary. Ensure the battery compartment is securely closed. Verify that programs are correctly set and the dial is on ON.
• Leaks from connections: Ensure all connections are hand-tightened. Check if rubber washers are properly seated and not damaged. Replace washers if worn.
• 表示の問題: If the LCD screen is dim or unresponsive, replace batteries. If water intrusion is suspected, ensure the battery compartment is sealed and the screen is not damaged.

仕様

Image: Detailed diagram illustrating the timer's dimensions and key technical specifications.

保証とサポート

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Restmo webサイト。 保証請求に備えて購入時のレシートを保管しておいてください。