isinwheel M10 Electric Bike User Manual

1. はじめに

This manual provides essential instructions for the safe assembly, operation, and maintenance of your isinwheel M10 Electric Bike. Please read this manual thoroughly before your first ride to ensure proper usage and to maximize the lifespan of your e-bike. Retain this manual for future reference.

安全警告: Always wear a helmet and appropriate safety gear when riding. Familiarize yourself with local traffic laws and regulations. Regular maintenance is crucial for safe operation.

2. パッケージ内容

Upon unpacking, verify that all components listed below are present and undamaged. If any items are missing or damaged, please contact customer support.

• isinwheel M10 Electric Bike Frame (partially assembled)
• 前輪
• Removable Lithium-Ion Battery (36V 10.4AH)
• 42V 2A急速充電器
• ペダル（左右）
• Seat with Seatpost
• フロントヘッドライト
• リアリフレクター
• Toolkit (including Allen wrenches and spanner)
• タイヤポンプ
• ユーザーマニュアル

Image: All components included in the isinwheel M10 Electric Bike package.

3. セットアップと組み立て

The isinwheel M10 Electric Bike comes 85% pre-assembled. Follow these steps to complete the assembly:

1. 開梱: Carefully remove all components from the packaging. Keep the packaging materials until assembly is complete and you are satisfied with the product.
2. ハンドルバーの取り付け: Attach the handlebar to the stem using the provided Allen wrenches. Ensure the handlebar is centered and tightened securely.


Image: Installing the handlebar.

3. 前輪の取り付け: Secure the front wheel to the front fork. Ensure the brake rotor aligns correctly with the caliper and the quick-release skewer is properly tightened.


Image: Attaching the front wheel.

4. ヘッドライトの取り付け: Mount the front headlight onto the designated bracket on the front fork or handlebar, and connect its cable.
5. ペダルの取り付け: Identify the left (L) and right (R) pedals. The left pedal tightens counter-clockwise, and the right pedal tightens clockwise. Use the spanner to secure them firmly.

Image: Installing the pedals.
6. シートの取り付け: Insert the seatpost into the frame's seat tube. Adjust the height for comfortable riding and secure it with the quick-release lever.


Image: Adjusting and securing the seat.

7. Rear Reflector Installation: Attach the rear reflector to the seatpost or rear rack (if applicable) for increased visibility.
8. バッテリーの取り付け: Slide the battery into its designated slot on the frame and lock it with the key.


Image: Installing the removable battery.

9. ケーブル管理 Ensure all cables are neatly routed and secured, away from moving parts.

4. 操作手順

4.1 電源オン/オフ

• To power on the bike, press and hold the power button on the LCD display for a few seconds until the screen illuminates.
• 電源を切るには、ディスプレイが消えるまで電源ボタンをもう一度押し続けます。

4.2 ライディングモード

The M10 Electric Bike offers multiple riding modes:

• ペダルアシストモード（PAS）： Provides motor assistance as you pedal. Adjust the assist level (1-5) using the '+' and '-' buttons on the control panel. Higher levels provide more assistance.
• フル電動モード（スロットル）: Engage the throttle for motor power without pedaling. This mode is typically used for quick acceleration or when you need a break from pedaling.
• 手動モード: モーターアシストなしでも、従来の自転車と同じように乗ることができます。

4.3 Shimano 7-Speed Gear System

The bike is equipped with a Shimano 7-speed transmission system. Use the gear shifter on the handlebar to change gears according to terrain and desired speed. Lower gears are for uphill climbing, and higher gears are for flat terrain or downhill riding.

4.4 LCD 表示機能

The smart LCD display provides real-time riding data:

• スピード： Current, average, and maximum speed.
• 乗車時間： 乗車時間。
• 走行距離: 旅行距離と総走行距離計。
• バッテリー残量: バッテリー残量。
• アシストレベル： Current pedal assist level (1-5).

5.バッテリー管理

5.1 バッテリーの取り外しと取り付け

The 36V 10.4AH Lithium-Ion battery is removable for convenient charging or storage.

• 除去： Unlock the battery with the provided key, then slide it out from the frame.
• インストール: Align the battery with the frame slot and slide it in until it clicks into place. Lock it with the key to secure.

5.2充電手順

Use only the provided 42V 2A Fast Charger.

1. バイクの電源がオフになっていることを確認してください。
2. バッテリーの充電ポートを見つけます。
3. 充電器を充電ポートに接続します。
4. 充電器を標準の壁のコンセントに差し込みます。
5. 充電中は充電器のインジケータ ライトが赤く点灯し、完全に充電されると緑色に変わります。
6. フル充電には通常3〜4時間かかります。
7. 充電が完了したら充電器を外してください。

6. メンテナンス

定期的なメンテナンスにより、電動自転車の寿命が長くなり、安全に操作できるようになります。

• クリーニング： 広告でバイクを拭くamp 布で拭いてください。電気部品に直接高圧洗浄をかけないでください。
• タイヤ空気圧: Check tire pressure before each ride. Maintain recommended pressure (usually indicated on the tire sidewall) using the included pump.

Air Inflation Instructions Video

Video: Demonstrates how to properly inflate the tires of the isinwheel M10 Electric Bike using the provided pump.
• ブレーキ： Regularly inspect brake pads and rotors for wear. Ensure brake levers engage smoothly and provide adequate stopping power. Adjust or replace as needed.
• 鎖： 錆を防ぎ、スムーズなギアチェンジを実現するために、チェーンを清潔に保ち、潤滑してください。
• 留め具: Periodically check all bolts and nuts for tightness, especially on the handlebars, seatpost, and wheels.
• バッテリーのケア： バッテリーは涼しく乾燥した場所に保管してください。長期間保管する場合は、2～3ヶ月ごとに50～70%まで充電してください。

7。 トラブルシューティング

If you encounter issues with your isinwheel M10 Electric Bike, refer to the following common problems and solutions:

If you cannot resolve an issue using the troubleshooting guide, please contact isinwheel customer support for assistance.

8. 仕様

Key technical specifications for the isinwheel M10 Electric Bike:

Image: isinwheel M10 Electric Bike dimensions and rider height guide.

9. 保証とサポート

The isinwheel M10 Electric Bike comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For warranty claims, technical support, or any questions regarding your e-bike, please contact isinwheel customer service. Provide your purchase details and a description of the issue for prompt assistance.

連絡先： Please refer to your purchase documentation or the official isinwheel web最新のカスタマー サポートの連絡先の詳細については、こちらのサイトをご覧ください。