LTS LTN8708D-P8N 8 Channel PoE NVR User Manual

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your LTS LTN8708D-P8N 8 Channel Power-over-Ethernet (PoE) Network Video Recorder (NVR). Please read this manual thoroughly before using the product to ensure proper and safe operation.

製品終了view

The LTS LTN8708D-P8N is an 8-channel PoE NVR designed for advanced surveillance systems, supporting up to 12MP resolution cameras. It features intelligent human and vehicle detection capabilities to enhance security monitoring.

主な特徴:

• Up to 8 IP camera input channels.
• Plug & play functionality with 8 power-over-Ethernet (PoE) interfaces.
• Supports H.264 / H.264+ / H.265 / H.265+ video compression formats.
• Decoding capacity: Up to 2 channels at 12 MP, 3 channels at 8 MP, 6 channels at 4 MP, or 12 channels at 1080p.
• Up to 80 Mbps incoming bandwidth.
• Provides MD 2.0 / VCA functions for intelligent detection.
• Includes a pre-installed 2TB hard drive for immediate recording.
• Equipped with 2 SATA interfaces for additional storage expansion.

This image displays the front and rear panels of the LTS LTN8708D-P8N NVR. The front panel typically includes status indicators and a USB port, while the rear panel features multiple PoE ports for camera connections, LAN port, audio input/output, HDMI, VGA, USB ports, and the power input.

箱の中身

開梱したら、以下にリストされているすべてのアイテムが揃っていて良好な状態であることを確認してください。

• LTS LTN8708D-P8N NVR unit (with pre-installed 2TB hard drive)
• 電源アダプター
• USBマウス
• リモートコントロール
• SATA Cables (for additional hard drives)
• イーサネットケーブル
• Mounting Screws for HDD

This image shows the accessories typically included with the NVR, which consist of a power adapter, mouse, remote control, SATA cables for additional hard drives, and an Ethernet cable.

設定

1。 開梱と検査

Carefully remove the NVR and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact your vendor immediately.

2. ハードドライブのインストール（オプション）

Your NVR comes with a 2TB hard drive pre-installed. If you wish to install additional hard drives (up to two SATA drives supported), power off the NVR, open the casing, connect the SATA data and power cables to the new drive, and secure it with the provided screws. Close the casing before powering on.

3. 周辺機器の接続

• カメラ: Connect IP cameras to the NVR's PoE ports using Ethernet cables. The NVR will provide power and data.
• モニター： モニターを NVR の HDMI または VGA 出力ポートに接続します。
• ネットワーク： Connect the NVR's LAN port to your network router or switch using an Ethernet cable for remote access and internet connectivity.
• 力： Connect the provided power adapter to the NVR's power input and then to a power outlet.
• USB デバイス: ナビゲーション用に USB マウスを USB ポートに接続します。

4. 初期設定

Upon first power-on, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up administrator passwords, network settings, date/time, and hard drive initialization. Ensure you set a strong password for security.

操作手順

1. ユーザーインターフェースナビゲーション

接続されたUSBマウスを使用して、NVRのグラフィカルユーザーインターフェース（GUI）を操作します。右クリックでメインメニューにアクセスし、左クリックでオプションを選択したりサブメニューを開いたりできます。

2.ライブ View と再生

• ライブ View: メイン画面から、 view live feeds from all connected cameras. Double-click a camera window to view 全画面で表示します。
• 再生： Access the 'Playback' menu to review 記録されたfootage. Select the desired camera, date, and time to start playback.

3. 人間と車両の検出

The NVR's advanced MD 2.0 / VCA functions allow for intelligent detection of humans and vehicles, minimizing false alarms from environmental factors. Configure these settings in the 'Event' or 'Smart Analysis' menu.

This image illustrates the Human and Vehicle Detection feature, highlighting how the NVR can differentiate between humans, vehicles, and other movements like rain, leaves, or animals to reduce false alarms. Alerts are sent to a connected device, as shown by the smartphone notification.

4.記録設定

Customize recording schedules, motion detection areas, and recording quality in the 'Record' menu. You can set continuous recording, motion-triggered recording, or scheduled recording.

5.ネットワークアクセス

Configure network settings (IP address, port forwarding) in the 'Network' menu to enable remote viewモバイルアプリまたは web browser. Ensure your network is secure.

メンテナンス

1. ハードドライブ管理

Regularly check the status of your hard drives in the 'HDD Management' menu. Format drives as needed, especially after initial installation or if issues arise. Ensure sufficient storage space for recordings.

2. ファームウェアのアップデート

定期的にメーカーの website for firmware updates. Updating the firmware can improve performance, add new features, and enhance security. Follow the provided instructions carefully during the update process.

3. System Backup and Restore

Regularly back up important configuration settings to a USB drive. This allows for quick restoration in case of system resets or failures. The 'Backup' and 'Restore' options are typically found in the 'System' menu.

トラブルシューティング

よくある問題と解決策

• ビデオ出力なし: Check monitor connections, power supply, and ensure the correct input source is selected on the monitor. Verify NVR power status.
• カメラが表示されない: Ensure cameras are properly connected to PoE ports and receiving power. Check camera IP addresses and network settings.
• 録音なし： Verify hard drive status and ensure it is initialized. Check recording schedules and motion detection settings.
• リモート アクセスの失敗: Confirm network connectivity, correct IP address/port forwarding settings, and firewall configurations. Ensure the mobile app or software is up to date.
• パスワードを忘れた場合: Refer to the manufacturer's official support resources for password reset procedures.

仕様

保証とサポート

For warranty information, technical support, and service inquiries, please refer to the official LTS Security website or contact your authorized vendor. Keep your purchase receipt and product serial number readily available for any warranty claims or support requests.