1. はじめに
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your EIELEDIY DIY Quadcopter Drone Kit, Model EU-QD-F120. This kit is designed as an engaging STEM project, offering a unique opportunity to understand drone technology from the ground up. It features advanced components and multi-functional flight capabilities.
重要な注意: This is a highly challenging DIY project requiring manual assembly of the drone's shell and motor components. It is recommended for users aged 14 and above. Patience and attention to detail are crucial for successful completion. Full technical support is available to assist you throughout the process.
2.安全上の警告
Read all safety warnings and instructions before assembly and operation to avoid injury or damage.
- ドローンは常に、人、動物、障害物から離れた、開けた場所で操作してください。
- Do not attempt to fly the drone in strong winds or adverse weather conditions.
- 飛行前には必ずすべてのコンポーネントがしっかりと固定されていることを確認してください。
- 回転するプロペラに指やゆったりとした衣服を近づけないでください。
- 空港や制限空域の近くではドローンを飛行させないでください。
- 18 歳未満のユーザーには大人の監督をお勧めします。
- Do not modify the drone's components or wiring beyond the instructions provided.
- Use only the provided batteries and charging equipment.
- In case of an emergency, immediately press the emergency stop button on the remote control.
3. パッケージ内容
Before beginning assembly, verify that all components are present in your kit. Refer to the image below for a visual representation of the included parts.
図3.1: 以上view of the EIELEDIY DIY Quadcopter Drone Kit, showing the assembled drone and all individual components including motors, propellers, frame parts, circuit boards, batteries, and remote control parts.
キットには以下が含まれます:
- Drone frame components (carbon fiber rods, plastic connectors)
- Brushless motors (4 units)
- Propellers (main and spare sets)
- Flight control module
- Optical flow positioning module
- Video transmission module
- Remote control circuit board and joysticks
- Lithium-polymer batteries (2 units)
- USB充電ケーブル
- Screws, nuts, and small assembly tools
- LEDライトストリップ
- Detailed instruction manual (paper)
図3.2: 詳細 view of key components: a brushless motor (showing rotor, stator, winding), high-strength carbon fiber rods for the frame, and the flight control module.
4. 組み立て手順
Assembly of the EIELEDIY DIY Quadcopter Drone Kit is a challenging but rewarding process, estimated to take approximately 1.5 hours. Follow the detailed steps in the included paper manual carefully. The difficulty level for assembly is rated 5 out of 5 stars.
4.1 必要なツール（付属していません）
- Small Phillips head screwdriver (precision set recommended)
- 小さなペンチまたはピンセット
- Wire cutters (optional, for zip ties)
- 清潔で明るい職場
4.2 一般的な組み立て手順
- フレーム構造： Assemble the carbon fiber rods and plastic connectors to form the quadcopter frame. Ensure all connections are secure.
- モーターの取り付け: Attach the brushless motors to the frame arms. Pay attention to motor orientation and wiring.
- Flight Control Module: Mount the flight control module onto the center of the frame. Connect motor wires and other sensor cables as indicated in the manual.
- プロペラアタッチメント: Securely attach the propellers to the motors. Note the rotation direction for each propeller (clockwise/counter-clockwise).
- Battery and Wiring: Install the battery holder and connect the battery to the flight control module. Route all wires neatly and secure them with zip ties if necessary.
- リモートコントロールアセンブリ: Assemble the remote control unit, installing the joysticks and connecting the necessary wires to the circuit board.
- 最終チェック: Before powering on, double-check all connections, screw tightness, and component orientation.
図4.1: Excerpts from the detailed paper instruction manual, illustrating steps for propeller assembly, flight control module installation, and the basic principles of drone flight and attitude control.
図4.2: Visual representation of the assembled drone highlighting key flight features such as 360-degree flips, automatic start and landing, altitude hold, real-time video transmission, and brushless motors. The image also indicates an assembly time of over 1.5 hours and a high assembly difficulty.
5. 操作手順
The EIELEDIY Quadcopter offers a multi-functional flight experience. The ability to fly proficiently requires practice. The operating difficulty is rated 5 out of 5 stars.
5.1 リモートコントロールオーバーview
Familiarize yourself with the remote control layout and functions before your first flight.
図5.1: Detailed layout of the drone's remote control. It shows the left joystick for throttle (up/down) and turning left/right, and the right joystick for moving forward/backward and left/right. Buttons include Headless Mode, Photo, Video Record, LED Switch, Power Switch, 360° Flip, Automatic Start, Automatic Landing, Calibration, Emergency Stop, and trim adjustments.
5.2 飛行前チェックリスト
- ドローンのバッテリーが完全に充電されていることを確認してください。
- Ensure the remote control batteries are installed and functional.
- Verify all propellers are securely attached and undamaged.
- 飛行には障害物や人がなく、開けた場所を選んでください。
- ドローンの電源を入れ、次にリモコンの電源を入れます。
- Calibrate the drone as per the manual's instructions (usually by moving joysticks in specific patterns).
5.3 Basic Flight Functions
- ワンクリック離陸/着陸: 指定されたボタンを押すと、自動的に離陸または着陸します。
- スロットル制御: Use the left joystick (up/down) to control altitude.
- 方向制御: Use the right joystick (forward/backward, left/right) to control horizontal movement.
- 旋回/ヨー: Use the left joystick (left/right) to rotate the drone horizontally.
- ヘッドレスモード: ドローンの向きがパイロットに相対するモードを有効にして、制御を簡素化します。
- スピードコントロール: Adjust flight speed settings for different skill levels or environments.
- 360° Rolls: Execute aerial acrobatics with a dedicated button (ensure sufficient altitude).
- オプティカルフローポジショニング: Helps maintain stable hovering, especially indoors or at low altitudes.
- リアルタイムビデオ伝送： Connect your smartphone to view ライブfootagドローンのカメラからの映像です。
5.4 飛行後の手順
- Land the drone safely using the one-click landing function or manual control.
- Power off the drone, then the remote control.
- Remove the drone battery for charging and storage.
- Inspect the drone for any damage after each flight.
6. メンテナンス
Regular maintenance ensures the longevity and optimal performance of your EIELEDIY Quadcopter Drone Kit.
- プロペラの検査: Regularly check propellers for cracks, bends, or damage. Replace damaged propellers immediately using the included spare sets.
- クリーニング： Gently clean the drone's frame and components with a soft, dry cloth. Avoid using liquids directly on electronic parts.
- バッテリーのケア：
- Charge batteries fully before storage if not used for an extended period.
- バッテリーを過充電または過放電しないでください。
- 電池は直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- バッテリーが膨張したり損傷しているように見える場合は、直ちに使用を中止し、適切に廃棄してください。
- モーターチェック: Ensure motors spin freely and are free from debris.
- ネジの締め付け具合: すべてのネジと留め具がしっかりと締まっているかどうかを定期的に確認してください。
7。 トラブルシューティング
This section addresses common issues you might encounter. For more complex problems, refer to the detailed paper manual or contact technical support.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ドローンの電源が入りません。 | Battery not charged or connected; power switch off. | Charge battery, ensure it's connected correctly, turn on power switch. |
| ドローンがリモコンに反応しません。 | Remote control not paired; low remote control battery; interference. | Re-pair drone and remote control (refer to manual); replace remote control batteries; move to an area with less interference. |
| ドローンは飛行中にドリフトします。 | Not calibrated; uneven propeller wear; wind interference. | Perform calibration; check and replace worn propellers; fly in calmer conditions. |
| 1 つ以上のモーターが回転していません。 | Loose motor wire connection; damaged motor; damaged flight control board. | Check motor wire connections; contact technical support for motor or board replacement. |
| 短い飛行時間。 | Battery not fully charged; aging battery; excessive payload. | Ensure battery is fully charged; consider replacing old batteries; remove unnecessary weight. |
If you encounter issues not listed here or require further assistance, please contact EIELEDIY technical support. Remember that careful and meticulous assembly is key to avoiding many operational problems.
8. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | エイレDIY |
| モデル番号 | EU-QD-F120 |
| アイテム重量 | 400グラム |
| 製品寸法（長さ x 幅 x 高さ） | 30 x 30 x 6 cm |
| 組み立て後の寸法（約） | 22cm (width) x 17cm (length) x 13cm (height, excluding propeller height of 5cm) |
| 電池のタイプ | リチウムポリマー電池1個（付属） |
| Max Flight Duration | 最大30分（バッテリー1個あたり） |
| 特集 | Optical flow positioning, one-click takeoff/landing, 360° rotation, real-time video transmission, headless mode, speed control |
| ビデオ録画解像度 | 1080p |
| 接続技術 | Wi-Fi |
| 含まれるコンポーネント | DIY Kit (all parts for drone and remote control) |
| 推奨年齢 | 14歳以上（成人） |
| 組み立ての難易度 | 5つ星のうち5 |
| Operating Difficulty | 5 out of 5 stars (requires practice) |
図8.1: Dimensions of the assembled EIELEDIY DIY Quadcopter Drone Kit, showing approximate measurements of 22cm width, 17cm length, 13cm height, and 5cm propeller height.
9. 保証とサポート
EIELEDIY provides comprehensive technical support for your DIY Quadcopter Drone Kit. If you encounter any issues during assembly or operation, or have questions regarding the product, please do not hesitate to contact our support team.
While specific warranty details are not provided in this manual, please retain your proof of purchase for any potential warranty claims. Our technical support team is dedicated to helping you successfully complete your project and enjoy your drone.