Amazon Basics Steam Mop for Hard Floors

導入

Thank you for choosing the Amazon Basics Steam Mop. This manual provides important information for the safe and efficient operation of your new steam mop. Please read it thoroughly before use and keep it for future reference. This 1200W steam mop is designed to effectively clean and sanitize sealed hard floors using only tap water, eliminating 99.9% of bacteria without harsh chemicals.

安全情報

火災、感電、または怪我のリスクを軽減するために、電気製品を使用するときは常に基本的な安全上の注意事項に従ってください。

• スチームモップをコンセントに差し込んだまま放置しないでください。
• Do not use the appliance on unsealed wooden floors or unglazed ceramic tiles, as steam can cause damage.
• 本製品を子供やペットの手の届かない場所に保管してください。
• 水タンクには水道水のみを使用してください。洗剤、香水、その他の化学薬品を入れないでください。機器が損傷し、保証が無効になる可能性があります。
• Always unplug the appliance before filling or emptying the water tank, or before performing maintenance.
• 使用中に電源コードが破損したり絡まったりしていないことを確認してください。

パッケージ内容

すべてのアイテムが揃っていて良好な状態であることを確認します。

• 1 x Amazon Basics Steam Mop
• 洗えるマイクロファイバーパッド3枚
• 1 x Filling Flask
• 1 x Plastic Scrubber

Image: The complete cleaning kit, including the steam mop, three microfiber pads, a filling flask, and a plastic scrubber.

製品終了view

The Amazon Basics Steam Mop features a lightweight design with a self-standing function for convenient storage. It includes an extra-long 6m power cord with a cable management hook.

Image: The Amazon Basics Steam Mop in its upright, self-standing position.

設定

1. モップを組み立てる: Connect the handle to the main body of the steam mop until it clicks securely into place.
2. マイクロファイバーパッドを取り付ける: Place one of the washable microfiber pads onto the mop head, ensuring it is securely attached.
3. 水タンクを満たします： Open the water tank cap. Use the provided filling flask to pour up to 450ml of clean tap water into the tank. Do not overfill. Close the cap securely.

Image: A hand pouring water into the steam mop's water tank using the provided filling flask.

操作手順

1. 電源オン: Plug the steam mop into a suitable electrical outlet. The indicator light will illuminate.
2. ヒートアップ: Wait approximately 30 seconds for the mop to heat up and produce steam.
3. Steam レベルを選択: The mop features 3 steam levels (high/medium/low). Select the appropriate level for your cleaning needs using the control button.
4. クリーニングの開始: Move the steam mop slowly and steadily across the sealed hard floor surface. The steam will clean and sanitize as you go. For stubborn spots, hold the mop over the area for a few seconds.
5. 仕上げクリーニング： When finished, unplug the mop and allow it to cool down before emptying any remaining water and removing the microfiber pad.

Image: Key features of the steam mop, highlighting its ability to clean sealed hard floors without chemicals, quick 30-second heat-up time, and a 6.10m power cable for extended reach.

メンテナンス

• クリーニングマイクロファイバーパッド: The microfiber pads are machine-washable. Wash them with similar colors and air dry. Do not use bleach or fabric softener.
• 水タンクを空にする: After each use, ensure the water tank is emptied to prevent mineral buildup.
• ストレージ： Store the steam mop in an upright position using its self-standing feature. Use the cable management hook to keep the power cord tidy.
• スケール除去： If you notice reduced steam output, descaling may be necessary. Consult the full product manual for detailed descaling instructions.

トラブルシューティング

仕様

保証とサポート

Your Amazon Basics Steam Mop is covered by a limited warranty. For detailed information regarding warranty terms, conditions, and how to obtain support, please refer to the warranty card included in your product packaging or visit the official Amazon Basics website. For technical assistance or customer service inquiries, please contact Amazon customer support.