Vente-unique Nirpio 2-Seater Fabric Bed Frame - Grey

1. はじめに

This manual provides essential instructions for the assembly, safe use, maintenance, and troubleshooting of your Vente-unique Nirpio 2-Seater Fabric Bed Frame. Please read this manual thoroughly before assembly and retain it for future reference. This bed frame is designed to offer comfort and style with its upholstered headboard and soft grey fabric finish.

2. 安全情報

• Always assemble the bed frame on a soft, clean surface to prevent damage to components or flooring.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary to maintain stability.
• Do not exceed the maximum supported weight of 500 kg (1102 ポンド). The recommended maximum load per person is 120 kg (264 ポンド).
• 窒息の危険を防ぐため、組み立て中は小さな部品や梱包材を子供の手の届かないところに保管してください。
• この製品は屋内専用に設計されています。
• Do not use power tools for assembly unless specifically instructed, as overtightening can damage the frame.

3. パッケージ内容

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact Vente-unique customer support.

• 布張りのヘッドボード
• ベッドフレームサイドレール（2）
• フットボード
• Central Support Beam (if applicable)
• Slatted Base (39 poplar slats)
• Bed Legs (4)
• Hardware Kit (screws, bolts, washers, Allen key)

Image: Main components of the Nirpio bed frame, including the upholstered headboard, side rails, and slatted base, laid out for assembly.

4. セットアップ（組み立て手順）

Assembly is required for this bed frame. It is recommended that two adults perform the assembly for ease and safety. Ensure you have adequate space to work.

1. 開梱して識別する: Carefully unpack all components and lay them out on a soft, clean surface. Identify each part using the component list.
2. サイドレールを取り付ける: Connect the side rails to the headboard and footboard using the provided bolts and washers. Hand-tighten all connections initially.
3. 中央サポートをインストールします: If your model includes a central support beam, attach it to the headboard and footboard connectors.
4. Secure Slatted Base: Place the slatted base frame onto the bed frame. Ensure all 39 poplar slats are correctly positioned and secured within the frame. Some slats may require individual attachment.
5. 脚を取り付ける: Securely attach the four bed legs to the designated points on the bed frame.
6. 最終締め付け: Once all components are in place, fully tighten all bolts and screws using the provided Allen key. Do not overtighten.
7. ポジションマットレス: Place your 180 x 200 cm mattress onto the slatted base.

画像: 詳細 view of the bed frame structure during assembly, highlighting the slatted base and frame connections.

5. 操作（使用）

The Nirpio bed frame is designed for optimal comfort and support when used with a compatible mattress.

• マットレスの互換性: This bed frame is specifically designed for a 180 x 200 cm mattress. Using a mattress of a different size may compromise stability and support.
• 適切な配置: Ensure the mattress is properly seated on the slatted base for optimal support and longevity of both the mattress and the bed frame.
• 均等な重量配分: Avoid jumping on the bed or applying excessive localized weight to prevent damage to the slats or frame. Distribute weight evenly.

Image: The Vente-unique Nirpio bed frame with a mattress, ready for use in a bedroom setting.

6. メンテナンス

適切なメンテナンスを行うと、ベッドフレームの寿命と外観が長くなります。

• ファスナーチェック: Regularly inspect all fasteners (screws, bolts) and re-tighten them as needed to maintain the bed frame's stability and prevent squeaking.
• 布地のクリーニング: For general cleaning of the polyester fabric, wipe with a damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these may damage the fabric or finish.
• 流出管理: こぼした場合は、すぐに清潔で乾いた布で拭き取ってください。こするとシミが広がる恐れがあるため、こすらないでください。
• 環境への配慮: Keep the bed frame away from direct sunlight and heat sources to prevent fading, discoloration, or material degradation.

7。 トラブルシューティング

ベッドフレームに問題が発生した場合は、次の一般的な解決策を参照してください。

• きしみ音:
  解決： Check all bolts and screws. Tighten any loose connections. Ensure the slats are properly seated within their holders and not rubbing against the frame. Applying a small amount of lubricant (e.g., silicone spray) to contact points between slats and frame can sometimes help.
• 不安定さやぐらつき:
  解決： Verify that all legs are securely attached and that the bed frame is on a level surface. Re-check all assembly connections to ensure they are fully tightened.
• 損傷したスラット:
  解決： If a slat is damaged or broken, do not use the bed with the damaged slat. This can compromise the mattress support and potentially cause injury. Contact Vente-unique customer support for replacement options.
• Fabric Damage/Stains:
  解決： Refer to the maintenance section for cleaning instructions. For significant damage, contact customer support.

8. 仕様

9. 保証とサポート

For warranty information, technical support, or to inquire about replacement parts, please refer to your purchase documentation or contact Vente-unique customer service directly. Keep your proof of purchase for any warranty claims.

You can find more information and contact details by visiting the official Vente-unique store:

Visit the Vente-unique Store