Piegricdiat Q26S Invisible Sleep Headphones User Manual

導入

This manual provides detailed instructions for the Piegricdiat Q26S Invisible Sleep Headphones. Designed for comfort and discreet use, these Bluetooth 5.3 wireless earbuds offer a comfortable audio experience, especially for side sleepers, with noise-blocking capabilities and IPX6 water resistance.

1. パッケージ内容

Upon opening your Piegricdiat Q26S Invisible Sleep Headphones package, you should find the following items:

• Piegricdiat Q26S Invisible Sleep Earbuds (Left and Right)
• 充電ケース
• USB充電ケーブル
• ユーザーマニュアル

Figure 1: Piegricdiat Q26S earbuds inside their charging case, displaying charge indicator lights.

2.セットアップガイド

2.1 イヤホンとケースの充電

Before initial use, fully charge the earbuds and the charging case. The charging case uses a USB-C port for charging.

1. 両方のイヤホンを充電ケースに入れます。正しく装着されていることを確認してください。
2. 付属の USB 充電ケーブルをケースの充電ポートと互換性のある USB 電源に接続します。
3. The indicator lights on the charging case will illuminate to show the charging status. The earbuds will also show a light (typically green) when charging.
4. 完全に充電されると、インジケーター ライトが変わるか消灯します。

Figure 2: The charging case with earbuds inserted. The case features indicator lights to show battery status.

2.2Bluetoothペアリング

Follow these steps to pair your Piegricdiat Q26S earbuds with your device:

1. イヤホンが充電されていることを確認します。
2. Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing light (typically green).
3. スマートフォンまたは Bluetooth 対応デバイスで、Bluetooth 設定に移動します。
4. 検索する 利用可能なデバイスを選択し、リストから「Q26S」を選択します。
5. Once connected, the earbud light will flash slowly or turn off, and you may hear a voice prompt confirming the connection.

注記： If the earbuds do not pair automatically, remove both earbuds from the charging case. Press and hold the button on each earbud for approximately 5 seconds until the green lights flash rapidly. Then, place them back into the charging case. After charging, remove both earbuds simultaneously. Press the button on each earbud once. The earbuds will automatically pair with each other. One earbud's green light will flash rapidly, while the other will flash slowly. Activate the Bluetooth on your phone and search for "Q26S" to connect.

3. 操作手順

3.1 イヤホンの装着

The Piegricdiat Q26S earbuds are designed for a comfortable and secure fit, especially for side sleepers. Gently insert each earbud into your ear canal, ensuring the soft silicone eartips and eartip caps provide a snug fit. Adjust for optimal comfort and sound isolation.

Figure 3: Earbuds designed for comfort, particularly for side sleepers.

Figure 4: The compact design of the earbud ensures a discreet and comfortable fit.

3.2 タッチコントロール

The earbuds feature touch-sensitive controls for managing music playback and calls:

3.3 Switching to Sleep Mode

When connected to your phone, tap the left or right earbud button 3 times to switch to sleep mode. You will hear a prompt "sleeping mode." In sleep mode, no beeps or breathing lights are allowed to ensure an undisturbed experience.

Figure 5: Earbuds provide a snug fit to naturally block out noise for peaceful sleep.

4. メンテナンスとケア

4.1 クリーニング

最適なパフォーマンスと衛生状態を維持するために、イヤホンと充電ケースを定期的に清掃してください。

• 柔らかく乾いた糸くずの出ない布でイヤホンと充電ケースを優しく拭いてください。
• If the silicone eartips are removable, detach them and clean with mild soap and water, then dry thoroughly before reattaching.
• Ensure the charging contact points on both the earbuds and inside the case are clean and free of debris to ensure proper charging.

4.2 防水性能（IPX6）

The Piegricdiat Q26S earbuds are rated IPX6 waterproof, meaning they are protected against high-pressure water jets from any direction. This makes them suitable for use during activities where they might be exposed to sweat or rain. However, they are not designed for prolonged submersion or high-pressure water activities like diving.

Figure 6: IPX6 water resistance protects earbuds from sweat and rain.

5。 トラブルシューティング

If you encounter issues with your Piegricdiat Q26S earbuds, refer to the following common solutions:

• イヤホンがペアリングまたは接続されない:
  • 両方のイヤホンが完全に充電されていることを確認してください。
  • Place earbuds back into the charging case, close the lid, then open it again to re-initiate pairing mode.
  • On your device, forget the "Q26S" Bluetooth connection and attempt to pair again.
  • If issues persist, try resetting the earbuds by following the manual pairing instructions (Section 2.2).
• 音が出ない、または音量が低い:
  • 接続されているデバイスとイヤホンの両方の音量レベルを確認してください。
  • Ensure the earbuds are properly seated in your ears for optimal sound delivery and noise isolation.
  • イヤホンが正しいデバイスに接続されていることを確認します。
• 断続的な接続または音声のドロップアウト:
  • Ensure your device is within the effective Bluetooth range (typically 10 meters/33 feet) and there are no significant obstructions.
  • 他のワイヤレス デバイスからの干渉を最小限に抑えます。
  • Fully charge the earbuds and the charging case.
• イヤホンが充電されない:
  • 充電ケーブルがケースと電源の両方にしっかりと接続されていることを確認してください。
  • イヤホンとケース内部の充電用接点が清潔でゴミなどがないことを確認してください。
  • 別の USB 充電ケーブルまたは電源アダプターを使用してみてください。

6. 仕様

7. 保証とサポート

Piegricdiat products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included in your product packaging or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.

カスタマーサポート

If you require further assistance or have questions not covered in this manual, please contact Piegricdiat customer support through the retailer's platform or the official brand website. When contacting support, please have your product model (Q26S) and purchase information ready.