Ankilo Bluetooth 5.2 トランスミッター レシーバー ユーザーマニュアル

導入

The Ankilo Bluetooth 5.2 Transmitter Receiver is a versatile 2-in-1 wireless audio adapter designed to enhance your audio experience. It seamlessly switches between Transmitter (TX) and Receiver (RX) modes, allowing you to stream audio wirelessly from non-Bluetooth devices or transform wired audio systems into Bluetooth-enabled ones. With advanced Bluetooth 5.2 technology and support for premium audio codecs like aptX Adaptive/Low Latency/HD, this device delivers high-quality sound with minimal delay, perfect for home, travel, or gym use.

安全情報

正しく使用し、デバイスの損傷や怪我を防ぐために、以下の安全ガイドラインを読んで従ってください。

• バッテリーの取り扱い: Do not disassemble, puncture, or expose the built-in battery to extreme temperatures (above 60°C/140°F) or direct sunlight. Dispose of the battery according to local regulations.
• 干渉： This device operates on radio frequencies and may cause interference with other electronic devices, including medical devices. Maintain a safe distance from sensitive equipment.
• 廃棄： Do not dispose of this product with household waste. It contains electronic components and a battery that require proper recycling. Contact your local authorities for information on electronic waste disposal.
• 水への露出: Keep the device away from water, moisture, and excessive humidity.
• クリーニング： 清掃には柔らかく乾いた布を使用してください。研磨剤や溶剤は使用しないでください。

パッケージ内容

Image: The Ankilo Bluetooth Transmitter Receiver and its accessories, including cables and adapters.

開封したらパッケージの内容を確認し、すべてのアイテムが揃っていることを確認してください。

• Ankilo Bluetooth 5.2 Transmitter Receiver Unit
• 3.5mmオーディオケーブル
• USB-C充電ケーブル
• Airplane Audio Adapter (dual 3.5mm jack)
• ユーザーマニュアル（このドキュメント）

製品終了view および機能

画像: 正面 view of the Ankilo Bluetooth Transmitter Receiver, highlighting its compact design and indicator lights.

The Ankilo Bluetooth 5.2 Transmitter Receiver offers a range of features for a superior audio experience:

• 2-in-1 機能: Easily switch between Transmitter (TX) mode for streaming audio from non-Bluetooth sources and Receiver (RX) mode for making wired devices Bluetooth-enabled.
• ブルートゥース 5.2 テクノロジー: Provides stable connection, faster pairing, and an extended range of up to 10 meters (33 feet).
• Premium Audio Codecs: Supports SBC, aptX, aptX-HD, aptX-LL (Low Latency), and aptX-AD (Adaptive) in TX mode, and SBC, AAC, aptX, aptX-HD, aptX-AD in RX mode for CD-quality sound. (Note: LDAC is not supported).
• ロスレスオーディオデコード: In RX mode, the device can decode various audio formats including MP3, WAV, FLAC, and APE for high-fidelity sound.
• Smart Multipoint Connection: Pair with two Bluetooth devices simultaneously (e.g., two headphones in TX mode, or a phone and tablet in RX mode) for seamless audio switching.
• Intuitive Controls & Visual Status: LED indicators clearly show the current mode (TX/RX), active audio codec, and connection status. Simple button controls for power and pairing.
• 長いバッテリー寿命: Equipped with a 450 mAh battery, providing up to 25 hours of continuous use on a single charge (approximately 3 hours to fully charge via USB-C).
• ポータブルデザイン: Compact and lightweight, making it ideal for travel, workouts, and on-the-go entertainment.

設定

1. デバイスの充電

Image: The Ankilo Bluetooth adapter being charged via its USB-C port, illustrating its long battery life.

Before first use, fully charge the Ankilo Bluetooth Transmitter Receiver. Connect the provided USB-C charging cable to the device's USB-C port and the other end to a standard USB power adapter (not included) or a computer's USB port. The charging indicator light will show charging status and turn off when fully charged. A full charge takes approximately 3 hours and provides up to 25 hours of playtime.

2.電源のオン/オフ

• 電源オン: Long-press the power button (usually the main function button) for approximately 3 seconds until the indicator lights illuminate.
• 電源を切る： Long-press the power button for approximately 3 seconds until the indicator lights turn off.

3. Switching Between TX (Transmitter) and RX (Receiver) Modes

The device automatically detects the mode based on the port used. The TX port is for Transmitter mode, and the RX port is for Receiver mode. Ensure the audio cable is connected to the correct port for your desired function.

操作手順

TX Mode (Transmitter) - Streaming Audio Out

In TX mode, the device transmits audio from non-Bluetooth sources (like TVs, PCs, MP3 players, or airplane entertainment systems) to your Bluetooth headphones or speakers.

Image: A man enjoying audio from an airplane entertainment system using the Ankilo adapter in TX mode with his Bluetooth headphones.

画像: クローズアップ view of the Ankilo adapter connected to a dual-pin airplane audio jack, enabling wireless audio.

1. オーディオソースを接続: Insert the 3.5mm audio cable into the TX audio port of the Ankilo device. Connect the other end of the cable to the audio output jack (e.g., headphone jack) of your TV, PC, MP3 player, or airplane entertainment system. For airplane use, you may need to use the included dual-pin adapter.
2. 電源オン: Long-press the power button on the Ankilo device for 3 seconds to turn it on. The device will automatically enter pairing mode (indicator lights will flash).
3. Prepare Bluetooth Headphones/Speakers: Put your Bluetooth headphones or speakers into pairing mode. Refer to their respective manuals for instructions.
4. ペアリング: The Ankilo device will automatically search for nearby Bluetooth devices (this may take 1-3 minutes). Once your headphones/speakers are found and connected, the indicator light on the Ankilo device will become steady.
5. Dual Connection (Optional): To connect a second pair of Bluetooth headphones/speakers, put the second device into pairing mode. Double-click any button on the Ankilo device to initiate pairing with the second device. Once connected, both devices will receive audio.

Image: Two individuals wearing headphones connected wirelessly to a TV via the Ankilo adapter, demonstrating its dual connection capability.

Important Note for TX Mode: Turn off other Bluetooth devices nearby to avoid interference during the initial pairing process.

RX Mode (Receiver) - Receiving Audio In

In RX mode, the device receives audio from your Bluetooth-enabled smartphone, tablet, or laptop and plays it through wired speakers, car stereos, or home audio systems.

Image: The Ankilo adapter connected to a car's AUX input, transforming the car stereo into a Bluetooth-enabled system.

1. オーディオ出力を接続: Insert the 3.5mm audio cable into the RX audio port of the Ankilo device. Connect the other end of the cable to the AUX input of your wired speaker, car stereo, or home audio system.
2. 電源オン: Long-press the power button on the Ankilo device for 3 seconds to turn it on. The device will automatically enter pairing mode (indicator lights will flash).
3. デバイスで Bluetooth を有効にします。 スマートフォン、タブレット、またはラップトップで Bluetooth 設定に移動し、Bluetooth を有効にします。
4. 検索して接続: Look for "TX20" in the list of available Bluetooth devices and select it to connect.
5. 接続確認: Once connected, the indicator light on the Ankilo device will become steady. You can now play audio from your Bluetooth device through your wired audio system.
6. Multipoint Connection (Optional): To connect a second Bluetooth device (e.g., another smartphone or tablet), ensure the first device is connected. Then, double-click any button on the Ankilo device. On your second Bluetooth device, search for "TX20" and connect. The device will seamlessly switch between the two connected sources.

Image: A visual guide detailing the step-by-step process for convenient operation in both RX (Receiver) and TX (Transmitter) modes, including pairing instructions.

メンテナンス

To ensure the longevity and optimal performance of your Ankilo Bluetooth Transmitter Receiver, follow these maintenance tips:

• クリーニング： Wipe the device with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or solvents.
• ストレージ： デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• 落下や衝撃を避ける: 物理的な損傷を防ぐため、デバイスは慎重に扱ってください。
• ポートの保護: Keep the audio and charging ports free from dust and debris.
• バッテリーのケア： For extended storage, charge the device to about 50% every few months to preserve battery health.

トラブルシューティング

If you encounter issues with your Ankilo Bluetooth Transmitter Receiver, refer to the following common problems and solutions:

仕様

保証とサポート

Ankilo is committed to providing high-quality products and excellent customer service. Your Ankilo Bluetooth Transmitter Receiver comes with:

• 12ヶ月の品質保証: Enjoy peace of mind with our 12-month warranty covering manufacturing defects.
• 60日間無料交換: If you encounter any issues within 60 days of purchase, we offer a free replacement.
• 24時間年中無休のカスタマーサービス: Our dedicated customer support team is available 24/7 to assist you with any questions or concerns.

For support, please refer to the contact information provided on the product packaging or the official Ankilo website. Please have your model number (CP327-MA06US) and purchase details ready when contacting support.