Aiho 6 Drawer Dresser (Model W-AP38) Instruction Manual

1. はじめに

Thank you for choosing the Aiho 6 Drawer Dresser, Model W-AP38. This dresser is designed to provide ample storage with a modern aesthetic, featuring quiet and smooth gliding drawers, durable metal handles, and solid wood legs. This manual provides detailed instructions for safe assembly, proper operation, and essential maintenance to ensure long-lasting use of your product.

Image 1: Aiho 6 Drawer Dresser (Model W-AP38) in a bedroom setting.

2. 安全情報

組み立ておよびご使用の前に、必ずすべての説明書をよくお読みになり、理解してください。説明書に従わない場合、怪我をしたり、製品が損傷したりする可能性があります。

• 転倒防止装置: Always install the included anti-tip device to secure the dresser to a wall. This is crucial to prevent serious injury from tipping furniture.
• 組み立て： Assemble the dresser on a soft, clean surface to prevent scratches. Ensure all hardware is securely tightened before use. Periodically check and re-tighten all connections.
• 重量制限: Do not exceed the recommended weight capacity for each drawer (approximately 20 lbs). Distribute weight evenly across drawers and on the top surface.
• 子供たち： お子様がドレッサーに登ったり、遊んだりしないようにしてください。小さな部品や組み立て用金具はお子様の手の届かないところに保管してください。

3. パッケージ内容

Before beginning assembly, verify that all parts and hardware are present and undamaged. Refer to the detailed parts list provided in your separate assembly guide for specific labels and quantities. All components are clearly labeled for easy identification.

画像2: 分解図 view of dresser components for assembly.

4. 組み立て手順

Assembly is required for this dresser. It is recommended that two people assemble the unit. A basic screwdriver is included, but a power drill may expedite the process. Follow the step-by-step instructions in your separate assembly manual carefully.

1. 開梱して識別する: Lay out all parts on a soft, clean surface. Identify each part using the labels and the parts list in your manual.
2. フレームを組み立てる: Begin by assembling the main frame of the dresser, connecting the side panels, bottom board, and middle vertical boards using the specified hardware.
3. 引き出しレールの取り付け: Attach the metal drawer runners to the inside of the dresser frame, ensuring they are level and securely fastened.
4. 引き出しの組み立て: Construct each of the six drawers individually, attaching the front, back, and side panels, and then sliding in the bottom board. Install the drawer runners to the sides of each drawer.
5. 脚を取り付ける: Securely fasten the solid wood legs to the bottom of the dresser frame.
6. ハンドルの取り付け: Attach the gold metal handles to the front of each assembled drawer.
7. 引き出しを挿入: Carefully slide each completed drawer into its designated slot within the dresser frame.
8. 転倒防止キットの取り付け: Secure the dresser to the wall using the provided anti-tip hardware as per the instructions in your assembly manual.

Image 3: Detail of drawer runner installation during assembly.

5. 操作手順

The Aiho 6 Drawer Dresser is designed for smooth and quiet operation.

• 引き出しの開閉： Gently pull or push the metal handles to open and close the drawers. The premium metal runners ensure a quiet and smooth gliding motion.
• ストレージ容量: 各引き出しには ample space for clothes, blankets, and other daily essentials. Do not overload drawers to ensure continued smooth operation and prevent damage. The maximum recommended weight per drawer is approximately 20 lbs.

Image 4: Spacious drawers for organizing belongings.

6. メンテナンスとケア

適切な手入れを行うことで、ドレッサーの外観と機能性を維持することができます。

• クリーニング： Wipe the dresser surfaces with a dry, soft cloth. The high-quality board is waterproof and stain-resistant, making it easy to clean. Avoid abrasive cleaners or harsh chemicals.
• こぼれ： Promptly wipe up any spills to prevent potential damage, although the surface is designed to resist stains.
• 検査： すべてのハードウェアと接続部を定期的に点検し、しっかりと締められていることを確認してください。必要に応じて締め直してください。

Image 5: Easy cleaning of the waterproof and stain-resistant surface.

7。 トラブルシューティング

• 引き出しがスムーズに動かない： Check if the drawer runners are properly aligned and free from obstructions. Ensure all screws securing the runners are tight.
• ドレッサーがぐらつく: Verify that all assembly screws and bolts are securely tightened. Ensure the dresser is placed on a level surface. Adjust the anti-tip device if necessary.
• 不足している部品： If any parts are missing or damaged upon arrival, please contact customer service immediately.

8. 仕様

画像 6: 製品の寸法。

9. 保証とサポート

Aiho provides 12-month product support and lifetime technical support for this dresser.

If you have any questions or encounter any issues with your Aiho 6 Drawer Dresser, please do not hesitate to contact our customer service team. You can reach us by clicking the "Contact Seller" option on your Amazon order page or by sending an email to our store's official email address. We aim to respond to all inquiries within 24 hours on weekdays.

Image 7: Customer service information.