Vertiv PowerIT IMD-5M ラックPDU 交換可能監視デバイス ユーザーマニュアル

1. はじめに

The Vertiv PowerIT rPDU IMD-5M is an innovative, hot-swappable Interchangeable Monitoring Device (IMD) designed to enhance power monitoring in data centers. It features a vibrant LCD touchscreen for real-time insights into critical metrics such as power, amp年齢とボリュームtage, supporting both local and remote monitoring. The IMD includes ports for serial communication and environmental monitoring, enabling comprehensive management of your power distribution system. Dual Gigabit Ethernet ports facilitate PDU management with fault-tolerant daisy chaining or IP aggregation, providing a reliable and scalable solution for modern IT environments.

This manual provides essential information for the proper installation, operation, and maintenance of your IMD-5M device.

2. 主な特徴

• Enhanced Data Visualization: Vibrant, pixel-addressable color touchscreen displays key power metrics (amperage、voltage) for efficient monitoring.
• 高度なセキュリティ機能: Secure boot and hardware trust anchor provide enhanced security against unauthorized access.
• Effortless Installation and Features: Tool-less installation and removal, redundant power capability, RGB status LED for alerts, and an internal sensor for automatic display orientation adjustment.
• Tested and Certified for Reliability: 100% tested for quality and functionality, meeting RoHS, China RoHS, UL, and CE compliance standards.
• 接続性: Serial communication and environmental monitoring ports, dual Gigabit Ethernet for daisy chaining or IP aggregation.

3.製品オーバーview

図3.1: フロント view of the Vertiv PowerIT IMD-5M, showing the touchscreen interface and various ports. The screen displays power consumption metrics like wattage and kilowatt-hours.

図3.2: 角度付き view of the IMD-5M, partially revealing the internal circuit board, highlighting its modular and hot-swappable design. The front panel with ports and touchscreen is clearly visible.

図3.3: 側 view of the IMD-5M, providing a clearer look at the entire internal circuitry and its compact form factor, designed for integration into a Rack PDU.

4. セットアップとインストール

The IMD-5M is designed for tool-less installation and removal into compatible Vertiv PowerIT Rack PDUs. Ensure the PDU is powered off or in a safe state before installation or removal.

1. 準備： Verify that the Rack PDU is compatible with the IMD-5M.
2. 挿入： Align the IMD-5M with the designated slot on the Rack PDU. Gently push the device into the slot until it clicks securely into place.
3. 繋がり： Connect necessary network cables to the Gigabit Ethernet ports (1 and 2) for network connectivity and daisy chaining. Connect serial communication or environmental monitoring sensors to their respective ports if required.
4. 電源オン: Once securely installed and connected, power on the Rack PDU. The IMD-5M will initiate its boot sequence.
5. 初期設定: Follow the on-screen prompts on the touchscreen for initial network configuration and device settings.

Note: The IMD-5M supports hot-swapping. However, always refer to your specific Rack PDU documentation for best practices regarding module replacement while the PDU is operational.

5. 操作

5.1. タッチスクリーンインターフェース

The IMD-5M features a vibrant LCD touchscreen for local monitoring and configuration. The internal orientation sensor automatically adjusts the display for optimal viewing, whether the PDU is mounted vertically or horizontally.

• メインディスプレイ: Shows real-time power metrics such as wattage (W), kilowatt-hours (KWh), volt-amperes (VA), and power factor (PF).
• ナビゲーション: Use the on-screen buttons (e.g., "MENU", "BACK") to navigate through different screens and settings.
• ステータスLED： The RGB status LED provides visual cues for device status and alerts. Refer to the device's online documentation for specific LED color codes.

5.2. リモートモニタリング

The IMD-5M supports remote monitoring and management through its network interfaces. Access the device's web interface or integrate it with your existing data center infrastructure management (DCIM) system.

• Web インタフェース： Enter the IMD-5M's IP address into a web browser to access its full suite of monitoring and configuration options.
• :SNMP: The device supports SNMP for integration with network management systems.
• Daisy Chaining/IP Aggregation: Utilize the dual Gigabit Ethernet ports for redundant network connections or to aggregate multiple PDUs under a single IP address, simplifying management.

6. メンテナンス

Regular maintenance ensures the longevity and optimal performance of your IMD-5M.

• クリーニング： Periodically clean the touchscreen and exterior with a soft, dry, anti-static cloth. Do not use abrasive cleaners or solvents.
• ファームウェアの更新： Check the Vertiv support website regularly for firmware updates. Keeping the firmware current ensures access to the latest features, security enhancements, and bug fixes.
• 環境条件: Ensure the operating environment adheres to the recommended temperature and humidity ranges specified in the product's technical documentation to prevent overheating or moisture damage.

7。 トラブルシューティング

This section provides basic troubleshooting steps for common issues. For more complex problems, refer to the Vertiv support webサイトをご覧いただくか、テクニカル サポートにお問い合わせください。

8. 仕様

9. 保証とサポート

The Vertiv PowerIT IMD-5M comes with a standard 3年間の限定保証この保証は延長可能です 5年 by registering your unit within 120 days of purchase.

For technical support, warranty claims, or to register your product, please visit the official Vertiv support website or contact your local Vertiv representative. Keep your purchase receipt and product serial number readily available.

Vertivサポート Webサイト： www.vertiv.com/support