JJC FD-TG1-U3

JJC FD-1 Flash Diffuser Instruction Manual

Model: FD-TG1-U3

1.製品オーバーview

The JJC FD-1 Flash Diffuser is designed to enhance macro photography by distributing light from your camera's built-in flash. It helps to evenly illuminate close-up subjects, reducing harsh shadows and hot spots for more balanced and natural-looking images. This diffuser is also suitable for underwater macro shooting.

JJC FD-1 Flash Diffuser attached to an Olympus Tough camera and detached
Image: The JJC FD-1 Flash Diffuser shown both attached to an Olympus Tough camera and as a standalone unit. This accessory is designed to soften and spread the light from the camera's internal flash.

2. 互換性

This flash diffuser is compatible with the following Olympus Tough digital camera models:

  • オリンパス タフ TG-7
  • オリンパス タフ TG-6
  • オリンパス タフ TG-5
  • オリンパス タフ TG-4
  • オリンパス タフ TG-3
  • オリンパス タフ TG-2
  • オリンパス タフ TG-1

重要な注意: When using the diffuser with Olympus Tough TG-4 (firmware version 2.0 or later), TG-3, TG-2, or TG-1 cameras, you may need to access additional camera settings to optimize exposure accuracy. Exposure accuracy issues may occur depending on the specific shooting environment with these older models.

3. パッケージ内容

パッケージには以下が含まれます:

  • Flash Diffuser ×1

4.インストールガイド

Follow these steps to attach the JJC FD-1 Flash Diffuser to your compatible Olympus Tough camera:

  1. Remove the Camera's Accessory Ring: Locate the integral accessory ring around your camera's lens. Gently twist and remove it, typically by turning counter-clockwise.
  2. Align the Diffuser: Take the JJC FD-1 Flash Diffuser and align its mounting mechanism with the camera's lens barrel. Ensure the diffuser is oriented correctly.
  3. Attach and Lock: Twist the diffuser clockwise until it securely locks into place. No additional tools are required for installation.
Step-by-step diagram showing how to install the JJC FD-1 Flash Diffuser
Image: A visual guide demonstrating the three simple steps to install the flash diffuser: 1. Remove the original lens ring. 2. Align and attach the diffuser to the lens. 3. Twist to lock in place.
Person holding an Olympus Tough camera with the JJC FD-1 Flash Diffuser attached, pointing it at coffee beans
Image: An Olympus Tough camera, equipped with the JJC FD-1 Flash Diffuser, being used to photograph coffee beans, illustrating a typical macro photography setup.

5. 操作手順

The JJC FD-1 Flash Diffuser features a light intensity adjustment lever, allowing you to control the flash output for optimal results in various shooting conditions.

光量調整

The diffuser includes a lever with two output settings: 高い そして 低い. Adjust this lever to select the appropriate light intensity based on your subject distance and ambient lighting. This flexibility helps achieve better exposure and lighting balance for your macro shots.

Close-up of the JJC FD-1 Flash Diffuser showing the light intensity adjustment lever
画像: 詳細な view of the flash diffuser highlighting the light intensity adjustment lever, which allows users to switch between high and low output settings.
Person using an Olympus Tough camera with the JJC FD-1 Flash Diffuser for macro photography
Image: A user capturing a macro shot with an Olympus Tough camera and the attached JJC FD-1 Flash Diffuser, demonstrating its application for close-up subjects.

デモビデオ

Video: This video demonstrates the installation and usage of the JJC FD-1 Flash Diffuser with an Olympus Tough camera, including how to adjust the light intensity for macro photography.

6. お手入れとメンテナンス

To ensure the longevity and optimal performance of your JJC FD-1 Flash Diffuser, follow these care guidelines:

  • クリーニング： Use a soft, dry cloth to wipe the diffuser. For stubborn dirt, a slightly damp 布で拭き、すぐに乾かしてください。研磨剤入りの洗剤や溶剤の使用は避けてください。
  • ストレージ： Store the diffuser in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
  • 取り扱い： Handle the diffuser with care to prevent scratches or damage to the diffusing surface.

7。 トラブルシューティング

If you encounter issues while using your JJC FD-1 Flash Diffuser, consider the following:

  • 不均一な照明: Ensure the diffuser is securely and correctly attached to the camera lens. Verify that the light intensity adjustment lever is set appropriately for your shooting conditions.
  • Exposure Issues (TG-1/TG-2/TG-3/TG-4): As noted in the compatibility section, older Olympus Tough models (TG-1, TG-2, TG-3, and TG-4 with specific firmware) may require manual adjustments to camera settings for optimal exposure when using the diffuser. Consult your camera's manual for advanced flash or exposure compensation settings.
  • Diffuser Not Attaching: Double-check that the camera's original accessory ring has been completely removed and that the diffuser is aligned correctly before twisting to lock.

8. 製品仕様

ブランドジェイジェイシー
モデル番号FD-TG1-U3
互換性のある取り付けOlympus Tough TG-7, TG-6, TG-5, TG-4, TG-3, TG-2, TG-1 Digital Cameras
カメラのフラッシュタイプマクロ
取り付けタイプ内部取り付け
耐水性レベル防水
含まれるコンポーネントFlash Diffuser ×1
Dimensions of the JJC FD-1 Flash Diffuser
Image: The physical dimensions of the JJC FD-1 Flash Diffuser, showing its compact and lightweight design.

9. 保証と顧客サポート

The JJC FD-1 Flash Diffuser comes with a 1年間の保証 購入日から製造上の欠陥をカバーします。

For technical assistance, warranty claims, or general inquiries, please visit the official JJC Store or contact their customer support through the retailer where the product was purchased.

詳しい情報と連絡先は、 JJC Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.