FLEXISPOT S1T-V2-AU ツインXL調節可能ベッドフレームベース ユーザーマニュアル

1. はじめに

This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT S1T-V2-AU Twin XL Adjustable Bed Frame Base. Please read all instructions carefully before use to ensure proper function and safety.

Image 1.1: FLEXISPOT Twin XL Adjustable Bed Frame Base.

主な特徴:

• 同時操作: Head and foot sections adjust concurrently. The head inclines up to 60 degrees, and the foot inclines up to 20 degrees.
• Segmented Design: Facilitates easy transportation and single-person assembly.
• 耐久性のある構造: Features a whisper-quiet motor tested for 5000 fatigue cycles at 600 lbs, and a sturdy steel frame.
• Oxford Fabric Bedspread: Enhances user comfort.
• Mattress Holder: Retainer bar secures the mattress, preventing movement.
• マットレスの互換性: Compatible with memory foam, gel foam, and latex foam mattresses.

2. 安全情報

警告: これらの安全ガイドラインに従わないと、怪我をしたり製品が損傷する可能性があります。

• 最大耐荷重 600 ポンドを超えないようにしてください。
• 不安定さを防ぐために、必ず組み立て手順に従ってください。
• Be cautious of sharp edges and moving motor components to avoid injury during assembly and operation.
• Keep children and pets away from the adjustable bed frame during operation.
• Ensure all power cords are properly routed and secured to prevent tripping hazards or damage.

3. セットアップと組み立て

The FLEXISPOT S1T-V2-AU adjustable bed frame features a segmented design for simplified assembly and transport. Follow these steps for installation:

1. 開梱: Carefully remove all components from the packaging. Due to the segmented design, individual sections can be moved more easily.
2. フレーム組み立て： Connect the segmented frame sections as per the included diagram. Ensure all brackets are securely fastened.
3. 脚の取り付け: Screw the bed legs into the designated points on the frame. The legs may have adjustable height options; refer to the specific leg instructions for details.
4. Mattress Retainer Bar: Install the mattress retainer bar at the foot of the bed to prevent the mattress from sliding.
5. 電源接続: Connect the power cord to the bed frame's motor and then plug it into a grounded electrical outlet.
6. Optional Bedspread: If using the Oxford fabric bedspread, place it over the frame. Note: Some components, like the mattress retainer bar, may need to be temporarily removed or adjusted to fit the bedspread, then re-secured.

Image 3.1: Segmented design allows for easier transport and assembly.

Image 3.2: The bed frame can be used standalone or integrated into an existing bed frame by removing slats.

組み立てデモンストレーションビデオ:

4. 操作手順

The FLEXISPOT S1T-V2-AU is controlled by a wired remote. Familiarize yourself with the remote's functions:

Image 4.1: Wired remote control for adjusting bed positions.

リモートコントロール機能:

• ヘッドアップ/ダウンボタン: Adjust the head section of the bed.
• 足上げ/下げボタン: Adjust the foot section of the bed.
• フラットボタン: ベッドを完全に平らな位置に戻します。
• ZG (Zero Gravity) Button: Activates the pre-programmed Zero Gravity position, which elevates the head and feet to promote circulation and reduce pressure.
• Anti-Snore Button: Activates a pre-programmed position designed to slightly elevate the head, which may help reduce snoring.
• メモリボタン（M1、M2、M3）： Allows you to save and recall up to three custom preferred positions. To save a position, adjust the bed to your desired setting, then press and hold a memory button until the remote indicates the position is saved (e.g., light flashes). To recall, simply press the saved memory button.

注記： The head and foot sections operate simultaneously. The remote control is wired to the bed frame for reliable operation.

5. メンテナンス

定期的なメンテナンスにより、調節可能なベッドフレームの寿命が長くなり、最適なパフォーマンスが確保されます。

• クリーニング： フレームを広告で拭くamp cloth and mild detergent. Avoid harsh chemicals or abrasive cleaners. For the Oxford fabric bedspread, follow its specific cleaning instructions.
• モーターおよび電気部品: Periodically inspect all cables and connections for any signs of wear or damage. Ensure they are securely plugged in. Do not attempt to open or service the motor or control box yourself. Contact customer support for assistance.
• 可動部品： Check that all moving parts operate smoothly. Do not apply lubricants unless specifically instructed by the manufacturer.
• 留め具: Occasionally check all bolts and screws to ensure they are tight. Retighten if necessary.

6。 トラブルシューティング

調節可能なベッドフレームに問題が発生した場合は、次の一般的なトラブルシューティング手順を参照してください。

Problem: Bed does not respond to remote control.

• 電力を確認します: Ensure the power cord is securely plugged into a working electrical outlet and the bed frame.
• リモート接続： Verify the remote control cable is properly connected to the bed frame's control box.
• 遮断器： Check your home's circuit breaker to ensure power is supplied to the outlet.

Problem: Motor makes unusual noise.

• 障害物： Inspect under the bed for any objects that might be obstructing the motor or moving parts.
• 重量配分： Ensure weight is evenly distributed on the bed and within the maximum capacity.
• サポートへのお問い合わせ: If the noise persists or is severe, discontinue use and contact FLEXISPOT customer support.

Problem: Bed does not fully flatten or raise.

• 障害物： Check for any items preventing the bed from moving freely.
• リセット： Press the FLAT button on the remote. If it doesn't fully flatten, try holding the down buttons for both head and foot for a few seconds.

ここに記載されていない問題については、FLEXISPOT カスタマー サポートにお問い合わせください。

7. 仕様

画像 7.1: 製品の寸法と仕様。

Image 7.2: Compatible mattress types: Memory, Latex, Gel, or Hybrid.

8. 保証とサポート

For warranty information, product support, or to purchase replacement parts, please visit the official FLEXISPOT website or contact their customer service department. Keep your purchase receipt and model number (S1T-V2-AU) handy for any inquiries.

詳しい情報と連絡先は、 AmazonのFLEXISPOTストア.