導入
This instruction manual provides detailed guidance for the safe and efficient installation and operation of your MOUNT PRO Long Arm TV Wall Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury. This mount is designed to accommodate most 32-75 inch TVs with VESA patterns from 150x100mm to 600x400mm, supporting up to 99 lbs.
製品の特徴
- Universal TV Wall Mount: Accommodates most 32"-75" TVs with VESA patterns from 150x100mm to 600x400mm. Suitable for LED LCD flat curved screen TVs up to 99 lbs.
- 37.9" Long Extension TV Mount: Extends 37.9" from the wall for optimal viewing and retracts to just 3" to save space. Ideal for corner placement.
- 最大限の柔軟性: Features +/-90° smooth swivel to cover more viewing positions. Offers +5°/-10° tilt to reduce glare and +/-3° post-install leveling for precise alignment.
- Space-Efficient Corner TV Solution: Combines extended reach with flexibility, making it perfect for corner installations and expanding room layout possibilities.
- 素早く簡単なインストール: Includes clear instructions, a bubble level, a mounting template, and necessary hardware in pre-labeled bags. Concrete anchors are available upon request.
安全情報
- 警告： DO NOT install into drywall alone! This mount requires installation into a wood stud or concrete/brick wall.
- Ensure the TV weight and VESA pattern are within the specified limits (Max 99 lbs, VESA 150x100mm to 600x400mm).
- Always use a stud finder to locate the center of wood studs.
- 取り付け面が、機器と取り付けられたすべてのハードウェアの合計重量を安全に支えられることを確認します。
- Do not overtighten screws to avoid stripping or damaging the wall/TV.
- 設置中は子供やペットを近づけないでください。
パッケージ内容
The package includes all necessary hardware for installation. Please verify all components are present before beginning.
Image: A variety of screws, washers, spacers, concrete anchors, and a small wrench are included, neatly organized in labeled plastic bags, alongside a mounting template and instruction manual.
The kit provides various screw sizes to match the back of your TV, concrete anchors for masonry installation, a small wrench, and a mounting template to assist with accurate measurements and alignment.
セットアップとインストール
ステップ1：テレビブラケットを取り付ける
Carefully place your TV face down on a soft, clean surface. Align the included TV brackets with the VESA mounting holes on the back of your TV. Select the appropriate screws and spacers from the hardware kit to secure the brackets. Ensure the brackets are equally centered and securely fastened.
Image: A diagram illustrating various VESA mounting patterns (150x100mm to 600x400mm) and how to identify horizontal and vertical screw holes on the back of a TV.
ステップ2: 壁プレートを取り付ける
Using a stud finder, locate the wood studs in your desired mounting location. Mark the drill holes using the provided mounting template. Pre-drill pilot holes. For concrete/brick walls, use appropriate concrete anchors (sent per request) and drill bits. Secure the wall plate to the wall using the provided lag bolts and washers. Use the integrated bubble level to ensure the wall plate is perfectly horizontal.
Image: A visual guide showing the three main steps of installation: 1. Mount brackets to TV, 2. Install wall plate, 3. Hang TV onto wall plate. A drilling template is also shown.
ステップ3：テレビを壁掛けプレートに取り付ける
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the wall plate. Tighten the safety screws located at the bottom of the TV brackets to prevent accidental dislodgement.
Video: This video demonstrates the installation process of a BONTEC TV wall mount, highlighting its features and ease of setup. It shows the mount extending, swiveling, and tilting, and illustrates the steps to attach the TV to the wall plate.
操作手順
伸長と収縮
Gently pull or push the TV to extend it up to 37.9 inches from the wall or retract it to a slim 3 inches. This allows for flexible viewing angles and space-saving when not in use.
Image: A visual representation of the TV mount extending a full 37.9 inches from the wall and retracting to a compact 3 inches, demonstrating its long extension capability.
回転機能
The articulating arm allows for a +/-90° swivel, enabling you to adjust the TV to face various parts of the room for optimal viewing from any position, including corners.
Image: The TV mount is shown swiveling 180 degrees, illustrating its multi-angle flexibility to provide a great view from various positions within a room.
Tilt and Leveling
Adjust the tilt of your TV by +5° to -10° to reduce glare from lights or windows. The mount also features +/-3° post-installation leveling, allowing you to fine-tune the TV's horizontal position after it's mounted.
Image: This image displays the tilt function of the TV mount, adjustable from +5° to -10° to reduce glare, and the +/-3° leveling feature for perfect positioning after installation.
メンテナンス
テレビ壁掛け金具の寿命と安全な動作を確保するには、次のメンテナンスを行ってください。
- 定期点検: すべてのネジと接続部がしっかりと締まっているか定期的に点検してください。必要に応じて締め直してください。
- クリーニング： マウント部分は柔らかく乾いた布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤の使用は避けてください。
- 潤滑: If the articulating arm feels stiff, apply a small amount of silicone-based lubricant to the moving joints.
トラブルシューティング
If you encounter any issues with your MOUNT PRO TV wall mount, refer to the following common solutions:
- テレビが水平ではありません: Use the +/-3° post-installation leveling feature to adjust the TV's horizontal alignment. Ensure the wall plate was installed level initially.
- マウントが緩い感じ: Recheck all lag bolts securing the wall plate to the wall and all screws attaching the TV brackets to the TV. Tighten any loose fasteners.
- 腕を動かすのが困難: Ensure no cables are snagged or obstructing movement. Apply a small amount of silicone lubricant to the joints if necessary.
- TV not securely attached: Verify that the TV brackets are properly hooked onto the wall plate and that the safety screws at the bottom of the brackets are tightened.
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | マウントプロ |
| モデル | B0DNZ697D6 |
| 対応テレビサイズ | 32インチ～75インチ |
| 最大積載量 | 99ポンド |
| VESA互換性 | 150x100mmから600x400mm |
| 壁からの延長 | 3インチ（収縮時）～37.9インチ（伸長時） |
| スイベル範囲 | +/-90° |
| 傾斜範囲 | +5° から -10° |
| レベル調整 | +/-3° |
| 材料 | 合金鋼 |
| 色 | 黒 |
| アイテム重量 | 14.52ポンド |
保証とサポート
MOUNT PRO products are designed for durability and performance. For specific warranty details, please refer to the warranty card included in your product packaging or visit the official MOUNT PRO website. For technical support, troubleshooting assistance, or to request concrete anchors, please contact MOUNT PRO customer service.
連絡先： Please refer to your product packaging or the official MOUNT PRO web最新の連絡先情報については、サイトをご覧ください。