Slevoo K1 Replacement Mineral Filter for C2-M25 User Manual

1.製品オーバーview

The Slevoo K1 Replacement Mineral Filter is designed to enhance your water by adding essential minerals and maintaining a balanced pH level. This filter is specifically compatible with C2-M25 water filtration systems, providing cleaner, healthier, and better-tasting water.

Image 1.1: The Slevoo K1 filter adds essential minerals like Potassium (K), Silicon (Si), Calcium (Ca), Magnesium (Mg), and Sodium (Na) to your filtered water.

Image 1.2: The filter is designed to increase the mineral content in your drinking water, supporting better mineral absorption.

Image 1.3: The Slevoo K1 filter helps maintain a balanced pH level in your water by introducing beneficial minerals.

2. セットアップとインストール

Follow these steps to properly install your Slevoo K1 Replacement Mineral Filter into your compatible C2-M25 water filtration system.

1. システムを準備する: Ensure your C2-M25 water filtration system is clean and empty.
2. 古いフィルターを削除: Carefully remove the existing filter from the pitcher or system according to your C2-M25 system's instructions.
3. 新しいフィルターを解凍します: Remove the new Slevoo K1 mineral filter from its packaging.
4. すすぎフィルター: Rinse the new filter under cold tap water for approximately 15 seconds to remove any loose carbon particles.
5. フィルターを挿入: Place the new Slevoo K1 filter into the designated slot in your C2-M25 system. Ensure it is seated firmly to prevent leaks.
6. 初期フラッシュ: Fill the system with water and discard the first two full pitchers of filtered water. This primes the filter and removes any remaining carbon dust.

Image 2.1: The Slevoo K1 filter is designed for quick and easy replacement in compatible systems.

3. 操作手順

Once installed and flushed, the Slevoo K1 mineral filter operates automatically with your C2-M25 water filtration system.

• 充填システム: Fill your C2-M25 system with tap water.
• Filter Process: The water will pass through the Slevoo K1 filter, where it will be filtered and remineralized.
• 楽しむ： Once the water has passed through the filter, it is ready for consumption.

4. メンテナンス

Regular replacement of your Slevoo K1 mineral filter is crucial for optimal performance and water quality.

• フィルターの寿命: For best results, replace the Slevoo K1 mineral filter every 3ヶ月 or after filtering approximately 40 gallons (150 liters) of water, whichever comes first.
• 交換インジケーター: If your C2-M25 system has a filter replacement indicator, reset it after installing a new filter.
• ストレージ： 使用していないフィルターは、直射日光を避けて涼しく乾燥した場所に保管してください。

Image 4.1: The Slevoo K1 filter is available in multi-packs for convenient replacement.

5。 トラブルシューティング

If you encounter any issues with your Slevoo K1 mineral filter, refer to the following common solutions:

• 低速濾過：
  • Ensure the filter is properly seated in the system.
  • The filter may be clogged. Replace the filter if it has reached its lifespan or if water flow is significantly reduced.
• 異常な味/臭い:
  • Ensure the initial flush procedure (discarding the first two pitchers) was completed.
  • The filter may need replacement.
  • Check the water source for any unusual conditions.
• 漏れ:
  • Verify the filter is correctly and securely installed in the filter housing.
  • Inspect the filter and housing for any damage.

6. 仕様

7. 保証情報

Slevoo products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the packaging of your product or visit the official Slevoo webサイトでご確認ください。保証請求のために購入証明書を保管してください。

8. カスタマーサポート

If you have any questions, concerns, or require assistance with your Slevoo K1 Replacement Mineral Filter, please contact Slevoo customer support through their official website or the contact information provided on your product packaging. Our team is dedicated to providing you with the best possible experience.