1. はじめに
Thank you for choosing the FLEXISPOT XL51 Dual OKIN Motor Power Lift Recliner Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new recliner. Please read it thoroughly before use and retain it for future reference.
2. 重要な安全情報
- すべての指示をお読みください: Before operating the recliner, familiarize yourself with all functions and safety warnings.
- 子供やペットを近づけないでください: Ensure children and pets are clear of the chair, especially during operation, to prevent injury.
- Avoid pinching hazards: Keep hands and feet clear of the reclining mechanism to prevent pinching.
- 適切な配置: Place the recliner on a level surface, ensuring adequate clearance around the chair for reclining and lifting functions.
- 重量制限： 最大推奨重量 350 ポンドを超えないようにしてください。
- Power cord safety: Ensure the power cord is not pinched, tangled, or placed in high-traffic areas where it could be damaged. Unplug the chair from the power outlet before cleaning or maintenance.
- Professional repair: Do not attempt to repair the chair yourself. Contact customer support for any issues.
3. パッケージ内容
Your FLEXISPOT XL51 recliner is designed for convenient "All-in-One Shipping" and arrives in a single box. Carefully unpack all components and verify against the list below:
- Main Recliner Base (with pre-installed OKIN dual motors)
- 背もたれ
- 左肘掛け
- 右肘掛け
- 電源アダプター
- 電源コード
- Handheld Remote Control (for lift/recline)
- Handheld Massage & Heat Remote Control
- ユーザーマニュアル
Image: The FLEXISPOT XL51 Power Lift Recliner Chair, fully assembled.
Image: Various components of the FLEXISPOT XL51, including the power adapter, power cords, and two remote controls.
4. 組み立て手順
The FLEXISPOT XL51 is designed for minimal assembly. Please allow 48時間 for the chair to fully rebound and expand after unboxing, as it is delivered in a compressed state.
- コンポーネントを解凍します: Carefully remove all parts from the single shipping box.
- アームレストを取り付ける: Identify the left and right armrests. Align the metal brackets on the armrests with the corresponding slots on the main recliner base. Slide them down firmly until they lock into place. Ensure the zippers on the armrests are properly secured.
- バックレストを取り付ける: Align the backrest with the main recliner base. Slide it down onto the metal brackets until it securely locks.
- 配線を接続: Locate the wiring connections at the back of the chair. Connect the color-coded wires (typically red to red, white to white) for the massage and heat functions. Connect the main power cable to the power adapter, and then connect the power adapter to the chair's main power input.
- プラグイン: 電源コードを壁のコンセントに差し込みます。
- リモート配置: Place the remote controls in the convenient side pockets.
Video: A user demonstrating the unboxing and assembly process of a FlexiSpot lift chair, highlighting the ease of setup.
ビデオ: 公式製品ビデオショーasing the FLEXISPOT XL51 Power Lift Recliner, including its assembly and various features.
5. 操作手順
Your FLEXISPOT XL51 recliner comes with two remote controls: one for lift and recline functions, and another for massage and heat.
5.1. Lift and Recline Functions
Use the primary handheld remote control to adjust the chair's position. The German OKIN dual motors allow for independent adjustment of the backrest and footrest.
- Lift to Standing: Press and hold the "Up" arrow button (usually the top button) to gently raise the chair to an almost standing position, assisting you in getting out.
- リクライニング： Press and hold the "Down" arrow button (usually the bottom button) to recline the backrest and raise the footrest. Continue holding to reach a nearly 180° lay-flat position.
- Adjust Backrest Independently: Use the dedicated backrest adjustment buttons (often depicted as a chair with only the back moving) to adjust the backrest angle without moving the footrest.
- Adjust Footrest Independently: Use the dedicated footrest adjustment buttons (often depicted as a chair with only the footrest moving) to adjust the footrest height without moving the backrest.
Image: A detailed diagram illustrating the functions of the lift and recline remote control, including the built-in USB charging port.
Video: A demonstration of the Flexispot Recliner's comfort and elevated features, including recline and lift functions.
5.2. マッサージと温熱機能
Use the secondary handheld remote control to activate and customize the massage and heating features.
- 電源オン/オフ: Press the power button to activate or deactivate the massage and heat functions.
- マッサージゾーン: Select from 8 massage points targeting the back, lumbar, thighs, and legs.
- マッサージモード： Choose from various massage modes (e.g., pulse, wave, normal) and adjust intensity levels (low, medium, high).
- 腰部加熱: 腰部加熱機能をオンにして心地よい暖かさを得ます。
- タイマー： Set a timer for the massage and heat functions to automatically turn off after a desired duration.
Image: The FLEXISPOT XL51 recliner showcasing its 8 massage points and lumbar heating feature.
6. 主な特徴
- Dual OKIN Motor: Equipped with German OKIN dual motors for independent control of the backrest and footrest, offering infinite reclining positions up to nearly 180 degrees.
- 特大デザイン: Features a spacious 24.5-inch wide seat, providing ample room for comfort.
- 8-Point Massage & Lumbar Heating: Eight massage points target the back, lumbar, thighs, and legs, complemented by a lumbar heating function for enhanced relaxation.
- USB充電ポート： Conveniently located USB ports allow you to charge your devices while relaxing.
- サイドポケット: Integrated side pockets provide storage for remote controls, magazines, or other small items.
- Extended Footrest: The footrest extends to provide full leg support in reclined positions.
画像: クローズアップ view of the German OKIN dual motors, emphasizing their quality and independent operation for the backrest and footrest.
Image: The FLEXISPOT XL51 recliner shown in its nearly 180-degree lay-flat position, illustrating its full recline and lift assistance features.
7. メンテナンスとケア
- クリーニング： 柔らかい布でからぶきしてください。amp 布で拭いてください。合成皮革を傷める可能性のある、刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
- 定期点検: すべての接続部と可動部品が安全で正しく機能しているかを定期的に確認してください。
- 電源コード: Ensure the power cord is not damaged or frayed. If damage occurs, discontinue use and contact customer support.
8。 トラブルシューティング
If you encounter any issues with your FLEXISPOT XL51 recliner, please refer to the following common solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Chair does not operate (no lift/recline/massage/heat) | Power cord unplugged; loose connections; power outage. | Ensure all power cords are securely plugged into the wall outlet and the chair. Check for tripped circuit breakers. |
| 動作中に軋み音やカチカチ音がする | Obstruction in mechanism; loose motor component. | Inspect the area around the motors and reclining mechanism for any obstructions. If the noise persists, discontinue use and contact customer support. |
| Chair does not fully recline/lift | Obstruction; incorrect operation. | Ensure there are no objects blocking the chair's movement. Refer to the operating instructions for correct button usage. |
これらの解決策で問題が解決しない場合は、FLEXISPOT カスタマー サポートに連絡して、さらにサポートを受けてください。
9. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | フレキシポット |
| モデル名 | XL51 |
| 色 | 黒 |
| 材料 | Faux Leather (Foam fill) |
| 製品寸法 | 奥行き30インチ x 幅35インチ x 高さ41.5インチ |
| シートの奥行き | 21インチ |
| 最大重量の推奨 | 350 ポンド |
| モータータイプ | Dual OKIN Motor |
| リクライニングポジションカウント | Infinite (up to nearly 180°) |
| 特集 | Power Lift, 8-Point Massage, Lumbar Heating, USB Ports |
| アイテム重量 | 144.5ポンド |
| 欧州連合 | 840460403023 |
Image: Dimensional drawing of the FLEXISPOT XL51 recliner, showing various measurements and the 350 lbs weight capacity.
10.保証とサポート
FLEXISPOT は、高品質の製品と顧客満足を提供することに尽力しています。
- 戻り値: You are allowed to return/exchange the furniture within 30 days of when you receive it.
- カスタマーサポート: For any questions, issues, or warranty claims, please contact FLEXISPOT customer support.
- メールアドレス: contact@flexispot.com
- 電話： +1(855)585-5618
- オンライン： 訪問する AmazonのFLEXISPOTストア 詳しい情報とサポートについては、こちらをご覧ください。