AMPACE Andes 1500 Power Station User Manual

1. はじめに

の AMPACE Andes 1500 Power Station with 100W Solar Panel is a portable energy solution designed for various applications, including home backup, outdoor camping, and off-grid power needs. It features a 1462Wh LiFePO4 battery, 2400W AC output, and can be fully recharged rapidly. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your power station and solar panel.

2. 安全に関する注意事項

本製品を操作する前に、すべての安全に関する指示をよく読んで理解してください。これらの指示に従わない場合、感電、火災、または重傷を負う可能性があります。

• ユニットを分解、修理、改造しないでください。
• ユニットを火気、水、極端な温度から遠ざけてください。
• 過熱を防ぐため、使用中は適切な換気を確保してください。
• 通気口を塞がないでください。
• 承認されたアクセサリと充電ケーブルのみを使用してください。
• お子様やペットの手の届かない場所に保管してください。
• 製品を地域の規制に従って廃棄してください。

3. 箱の中身

開梱時にすべてのアイテムが揃っていることを確認します。

• AMPACE Andes 1500 Portable Power Station
• 1x AMPACE 100W Solar Panel
• AC充電ケーブル
• 車用充電ケーブル
• 5521 to XT60 Solar Charging Cable
• コネクタユーザーマニュアル
• ウェルカムガイド

4.製品オーバーview

The Andes 1500 Power Station and its accompanying 100W solar panel are designed for robust and reliable power delivery.

図4.1: AMPACE Andes 1500 Power Station and 100W Solar Panel. The power station features multiple output ports and a clear display, while the solar panel is foldable for portability.

The power station is equipped with a 1462Wh LiFePO4 battery, offering a long lifespan of over 6,000 cycles, equivalent to more than 10 years of daily use. It supports up to 2400W AC output and features A-Boost technology for rapid charging.

Figure 4.2: The Andes 1500 can achieve a full charge in just 55 minutes using A-Boost technology, significantly faster than conventional models.

The included 100W solar panel is foldable, lightweight, and designed for durability with an IP67 rating, making it water-resistant and dustproof. It can capture up to 23% more energy, providing an efficient green charging solution.

Figure 4.3: The advanced EV-grade LFP battery ensures an exceptional lifespan of over 6,000 cycles, providing reliable performance for over a decade.

The power station also features a <20ms auto-switch function for uninterrupted power during outages and customizable ambient lighting modes controllable via the Ampace App.

Figure 4.4: The <20ms auto-switch ensures that your important devices remain powered during sudden outages, providing instant peace of mind.

Figure 4.5: Control the power station's colorful ambient light with four modes (Breathing, Sparkling, Diffusing, Single) using the Ampace App.

5. セットアップ

5.1 初期充電

Before first use, fully charge the power station using the provided AC charging cable. Plug the AC cable into a standard wall outlet and connect it to the AC input port on the power station. The display will indicate charging status.

5.2 ソーラーパネルの接続

ソーラーパネルを使用して発電所を充電するには:

1. 100W ソーラーパネルを広げて直射日光の当たる場所に置きます。
2. ソーラーパネルの後ろにある MC4 ポートを見つけます。
3. Use an extension cable (if needed) to connect the MC4 ports to the MC4 to XT60 solar charging converter.
4. Connect the solar charging cable converter to the XT60 port on your power station.

Figure 5.1: Diagram illustrating the connection process for the solar panel to the power station.

Adjust the solar panel's angle for optimal sunlight exposure. The panel supports 4 angle adjustments: 30°, 40°, 50°, or 80°.

Figure 5.2: The solar panel can be adjusted to four different angles (30°, 40°, 50°, 80°) to maximize solar energy capture.

6. 操作手順

6.1 電源のオン/オフ

Press and hold the main power button to turn the unit on or off. The display will illuminate, showing battery level and output status.

6.2 AC/DC/USB出力の使用

To activate specific output ports (AC, DC, USB), press the corresponding button next to the port section. The indicator light will turn on, signifying that the ports are active and ready for use.

6.3 A-Boost Fast Charging

For the fastest charging experience, activate A-Boost charging through the Ampace mobile application. This feature allows the power station to reach full capacity in approximately 55 minutes.

6.4 非常用電源

The Andes 1500 features an emergency power supply function with a <20ms auto-switch. When connected to a wall outlet and devices are plugged into the power station, it can automatically switch to battery power during an outage, ensuring continuous operation for critical devices.

Figure 6.1: The power station provides an instant emergency power supply, keeping essential devices running during power interruptions.

6.5 静かな動作

The Andes 1500 is designed for quiet operation, especially in sleep mode, where noise levels are below 30dB. This makes it suitable for indoor use and overnight charging without disturbance.

Figure 6.2: Enjoy peaceful charging with noise levels under 30dB in sleep mode, ideal for quiet environments.

7. メンテナンス

7.1バッテリーケア

The Andes 1500 uses a durable LiFePO4 battery. To maximize its lifespan:

• バッテリーを頻繁に完全に放電することは避けてください。
• Store the unit in a cool, dry place, ideally at 50% charge, if not used for extended periods.
• Recharge the unit every 3-6 months if stored, to maintain battery health.

Figure 7.1: The integrated Battery Management System (BMS) enhances battery performance and lifespan through smart monitoring and robust protection features.

7.2 クリーニング

発電所とソーラーパネルの外側を清掃する際は、柔らかく乾いた布を使用してください。研磨剤入りの洗剤を使用したり、ユニットを水に浸したりしないでください。

8。 トラブルシューティング

問題が発生した場合は、 AMPACE Andes 1500, refer to the following common problems and solutions:

問題が解決しない場合は、カスタマー サポートにお問い合わせください。

9. 仕様

10. 保証とサポート

10.1 保証情報

の AMPACE Andes 1500 Power Station comes with a 5-year warranty, ensuring dependable performance and peace of mind. Please retain your proof of purchase for warranty claims.

10.2 カスタマーサポート

For technical assistance, troubleshooting, or warranty inquiries, please contact AMPACE customer service. Refer to the welcome guide included in your package for specific contact details or visit the official AMPエース webサイト。

また、 AMPACE Store on Amazon 詳細とサポートリソースについては、こちらをご覧ください。