1. はじめに
This manual provides essential information for the safe and effective use of your Masterplug Mode 2 EV Charging Cable. Designed for electric and hybrid vehicles, this cable offers a convenient and reliable charging solution. Please read this manual thoroughly before first use and retain it for future reference.
Image 1.1: Masterplug EV Charging Cable (10 Metres)
2 製品の特徴
- Safe and Intelligent Mode 2 Charging: Charges all compatible plug-in electric cars and vehicles.
- 広範囲の動作温度: -25°C ～ +40°C の温度範囲で確実に機能します。
- Weather and Dust Proof: Control box is IP66 rated when connected to a vehicle and IP55 when not in use, ensuring durability in various conditions.
- LCD Charging Status Display: 充電状態、容量、tage, current, power, and duration.
- Integrated Safety Protection: Features built-in protection for PEN faults, over/under voltage, thermal overload, and 30mA AC and 6mA DC RCD.
- Efficient Charging Power: 10を配達 Amp/2.4 kW, providing an average of 8 miles per charging hour.
- 自動シャットオフ: Charging stops automatically when the vehicle is fully charged.
Image 2.1: Mode 2 - Type 2 to 3 Pin Plug Configuration
Image 2.2: All Weather Protection (IP66 Rated)
3. セットアップ
- ケーブルを検査します。 Before each use, visually inspect the charging cable, plugs, and control box for any signs of damage, wear, or foreign objects. Do not use if any damage is observed.
- 電源: Ensure the 3-pin UK plug is connected to a suitable, dedicated EV-rated 13A socket. It is highly recommended to use an outdoor socket specifically designed for EV charging, such as the Masterplug WP21 (sold separately), for safety and weather resistance. Do not use extension leads or adapters.
- 車両の準備: Ensure your electric or hybrid vehicle is parked safely and switched off.
Image 3.1: Recommended EV Rated Socket Connection
4. 操作手順
- 電源に接続: Plug the 3-pin UK plug into the EV-rated wall socket. The control box LCD display will illuminate, indicating readiness.
- 車両に接続: タイプ2コネクタを車両の充電ポートにしっかりと差し込み、カチッと音がするまでしっかりと固定してください。
- 充電開始: The charging process should begin automatically. The LCD display on the control box will show real-time charging data, including current temperature, voltage、電流（Amps), power (kW), charging duration, and accumulated energy (kWh). The indicator light on the control box will typically show a solid green or blue light during active charging.
- モニター充電: Periodically check the LCD display to monitor the charging progress.
- 充電完了： The cable will automatically stop charging when the vehicle's battery is full. The LCD display will indicate charging completion, and the indicator light may change color or turn off.
- 車両から切断: Once charging is complete, safely disconnect the Type 2 connector from your vehicle's charging port.
- 電源を切る: Unplug the 3-pin UK plug from the wall socket.
Image 4.1: LCD Status Display during Charging
Image 4.2: Charging in Progress
5. メンテナンス
- クリーニング： Clean the cable and control box with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure all connectors are free from dust and moisture before use.
- ストレージ： Store the charging cable in a dry, cool place, away from direct sunlight and extreme temperatures. Coil the cable neatly to prevent kinks or damage.
- 定期点検: Periodically inspect the cable, plugs, and control box for any signs of damage, such as cuts, cracks, or discoloration. If any damage is found, discontinue use immediately and contact customer support.
6。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ケーブルが充電されない | Cable not fully plugged in; Vehicle charging port issue; Power supply issue; Safety protection activated. | Ensure both ends are securely connected. Check vehicle's charging system. Verify wall socket has power. Check LCD for error codes (if any) and refer to safety features. Unplug and re-plug. |
| LCDディスプレイが機能しない | No power to the unit; Internal fault. | Ensure the 3-pin plug is securely connected to a live socket. If still not working, contact customer support. |
| 充電が突然停止する | Vehicle fully charged; Safety protection activated (e.g., over/under voltage, thermal overload, PEN fault, RCD trip). | Check vehicle's battery status. If not full, check LCD for error messages. Disconnect and reconnect. If issue persists, consult a qualified electrician or contact customer support. |
| Cable or control box feels hot | Normal operation (slight warmth); Overload or fault. | A slight warmth is normal. If it feels excessively hot or smells burnt, immediately disconnect from power and vehicle. This indicates a potential thermal overload or fault. Do not use and contact customer support. |
7. 仕様
| 特徴 | 仕様 |
|---|---|
| 製品寸法 | 30 x 35 x 9 cm |
| 重さ | 2.43キロ |
| モデル番号 | EVCM221010-MP |
| ブランド | マスタープラグ |
| 色 | グレー |
| ケーブル長さ | 10メートル |
| 出力巻tage | 2.4E+2 ボルト（DC） |
| 充電電流 | 10 Amp |
| 充電電力 | 2.4kW |
| 侵入保護等級（IP） | IP66 (connected), IP55 (unconnected) |
| 動作温度 | -25°C ～ +40°C |
| 安全コンプライアンス | CE, UK EV standards BS1363/EV |
8. 保証とサポート
Masterplug provides a 1年間のメーカー保証 against faulty materials and workmanship for this product. This warranty ensures peace of mind regarding the quality and reliability of your charging cable.
For warranty claims, technical support, or any questions not covered in this manual, please contact Masterplug customer service through their official website or the retailer from whom the product was purchased. Please have your product model number and purchase details ready when contacting support.