1. はじめに
Thank you for choosing Brightever Under Cabinet Lights. These LED rechargeable lights are designed to provide convenient and efficient illumination for various indoor spaces such as kitchens, bedrooms, closets, and hallways. Featuring motion sensor capabilities, stepless dimming, and multiple installation options, these lights enhance visibility and energy efficiency in your home.
2. 箱の中身
- 5 x Brightever Under Cabinet Lights
- 取扱説明書
- Mounting Hardware (screws and expansion anchors)
- 接着金属板
- 3 xUSB充電ケーブル
- Warranty/Explanation Sheet
3. 製品仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | ブライトエバー |
| モデル番号 | YS-CGD20-01 |
| 色温度 | 6500K（クールホワイト） |
| バッテリー容量 | 1500mAh（充電可能） |
| 輝度 | 150ルーメン |
| 調光範囲 | 10%～100%の無段階調光 |
| モーションセンサー検出角度 | 120° |
| Motion Sensor Sensing Range | 10フィート |
| Auto-Off Time (Motion Sensor Mode) | 20 秒間の非アクティブ状態 |
| 充電時間 | フル充電には3～4時間かかります |
| Battery Life (Always On Mode) | 最大10時間（明るさ100%時） |
| Battery Life (Motion Sensor Mode) | 35-60 days (sensing 10-20 times/day) |
| 材料 | アクリル、アルミニウム、プラスチック |
| 商品の寸法 (長さ x 幅 x 高さ) | 長さ7.78インチ x 幅1.57インチ x 高さ0.39インチ |
| 屋内/屋外での使用 | 屋内 |
4. セットアップとインストール
The Brightever Under Cabinet Lights offer three convenient installation methods:
Method 1: Magnetic Attachment
The lights have built-in powerful magnets. If your desired mounting surface is ferromagnetic (e.g., a metal refrigerator or shelf), you can directly attach the light to it.
Method 2: Adhesive Metal Plate
For non-ferromagnetic surfaces, use the provided adhesive metal plates.
- Clean the installation area thoroughly to ensure it is dry and free of dust.
- Peel off the protective film from the adhesive side of the metal plate.
- Attach the metal plates to the desired location. Ensure they are aligned with the magnets on the back of the light.
- Snap the light onto the attached metal plates.
Method 3: Screw Mounting
For a more permanent installation, use the provided screws and expansion anchors.
- Mark two holes at the mounting spot, spacing them to match the width of the light bar's mounting points.
- Drill holes at the marked spots. Insert the expansion anchors.
- Secure the metal plates with screws into the anchors.
- Mount the light onto the secured metal plates.
インストールビデオガイド
Video: Official Brightever guide demonstrating the installation process and various features of the under cabinet lights.
5. 操作手順
The under cabinet lights feature a user-friendly button for control.
電源オン/オフとモードの選択
- 一度押す: To power on the light.
- もう一度押す： To switch to Motion Sensor Mode.
- 3回目に押すと: To shut down the light.
無段階調光
While the light is on (in either mode), long press the button to steplessly adjust the brightness from 10% to 100%. The light features a memory function that retains the last set brightness level.
モーションセンサーモード
In Motion Sensor Mode, the light automatically detects human activity within a 120° detection angle and a 10FT sensing range. It will turn off after 20 seconds of inactivity to conserve energy.
ライトの充電
The lights are equipped with a 1500mAh rechargeable battery. Use the provided USB charging cables for optimal performance.
- Connect the USB charging cable to the USB-C port on the light.
- A red indicator light will show that the device is charging.
- The indicator light will turn green when fully charged (approximately 3-4 hours).
- A full charge provides up to 10 hours of light in Always On Mode (at 100% brightness) or 35-60 days in Motion Sensor Mode (based on 10-20 detections per day).
6. メンテナンス
- クリーニング： ライトの表面は柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
- バッテリーのケア： To prolong battery life, avoid fully discharging the battery frequently. Recharge the lights when the brightness noticeably diminishes.
- ストレージ： If storing the lights for an extended period, charge them fully and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
7。 トラブルシューティング
- ライトが点灯しない:
- バッテリーが充電されていることを確認してください。付属のUSBケーブルを使用して電源に接続してください。
- Check if the light is in the correct operating mode (Always On or Motion Sensor). Press the button to cycle through modes.
- モーションセンサーが動きを検知していません:
- センサーが遮られていないことを確認してください。
- Verify the light is in Motion Sensor Mode.
- Avoid positioning multiple sensors too closely, as this may interfere with operation.
- The detection range is 10FT and angle is 120°. Ensure movement occurs within this area.
- バッテリーの消耗が早い:
- Ensure the light is fully charged (indicator turns green).
- In Motion Sensor Mode, frequent activations will consume more battery.
- Ensure you are using the provided charging cables. Other cables may not be compatible and could affect charging efficiency or battery lifespan.
- 光が暗すぎるか明るすぎる場合:
- Long press the button to adjust the brightness using the stepless dimming feature.
8. 安全情報
- 製品を分解したり改造したりしないでください。
- 水や湿度の高い環境を避けて保管してください。
- 直射日光や高温にさらさないでください。
- お子様の手の届かない場所に保管してください。
- 地域の規制に従ってバッテリーを廃棄してください。
9. 保証とサポート
Brightever is committed to providing quality products and customer satisfaction. For any questions, concerns, or support needs regarding your under cabinet lights, please refer to the included Warranty/Explanation Sheet or contact Brightever customer service. We strive to offer friendly and helpful services.