Hizashi ST19-6W-DIM-27K6P-FX

Hizashi ST19 Dimmable LED Edison Bulbs (E26, 2700K, 6W)

Model: ST19-6W-DIM-27K6P-FX | Brand: Hizashi

導入

Thank you for choosing Hizashi ST19 Dimmable LED Edison Bulbs. These vintage-style LED bulbs combine classic aesthetics with modern energy efficiency and advanced dimming capabilities. Designed for a wide range of applications, they provide a warm white glow (2700K) with high color rendering (95+ CRI) to enhance the ambiance of any space. This manual provides essential information for safe installation, optimal operation, and proper maintenance of your new LED bulbs.

Hizashi ST19 LED Edison bulbs in various light fixtures, highlighting UL Listed, Soft White 2700K, 700lm Brightness, and 60W Equivalent features.

Image: Hizashi ST19 LED Edison bulbs showcasing key features like UL listing, 2700K warm white light, 700 lumens brightness, and 60W incandescent equivalency.

安全情報

これらの電球を取り付けたり使用したりする前に、すべての安全に関する指示をよく読んで理解してください。指示に従わないと、感電、火災、その他の危険が発生する可能性があります。

  • 感電の危険: 設置または保守の前に電源を切ってください。
  • 火災の危険: 最大ワット数を超えないでくださいtage rating of your fixture. These bulbs are 6W LED, equivalent to 60W incandescent.
  • 屋内/屋外での使用: Suitable for both indoor and outdoor enclosed fixtures. Ensure outdoor fixtures are sealed to prevent water ingress.
  • 調光可能: Use only with compatible LED dimmers. Incompatible dimmers may cause flickering or damage to the bulbs.
  • 電球を分解したり改造したりしないでください。
  • Avoid direct exposure to water or excessive moisture unless the fixture is specifically rated for such conditions.

セットアップとインストール

These bulbs feature a standard E26 base, making them compatible with most common light fixtures. Follow these steps for safe installation:

  1. 電源を切る: 電球を交換する前に、ブレーカーまたは壁のスイッチで照明器具の電源がオフになっていることを確認してください。
  2. 冷却を許可します: If replacing an old incandescent bulb, allow it to cool completely before touching to avoid burns.
  3. 古い電球を外す: 古い電球を反時計回りに慎重にソケットから外します。
  4. 新しい電球をねじ込みます: Gently screw the Hizashi LED Edison bulb clockwise into the E26 socket until it is snug. Do not overtighten.
  5. 電力を回復する: ブレーカーまたは壁のスイッチで電源を再びオンにします。
A hand holding a Hizashi ST19 LED Edison bulb, showing its clear glass and E26 base.

Image: A Hizashi ST19 LED Edison bulb held in hand, illustrating its design and E26 base for easy installation.

Hizashi ST19 LED Edison bulb installed in a modern pendant light fixture.

Image: A Hizashi ST19 LED Edison bulb installed in a pendant light, demonstrating its aesthetic appeal in a fixture.

操作手順

These Hizashi LED Edison bulbs are designed for simple operation and offer dimming capabilities.

  • 標準操作: Once installed, turn on the light switch to illuminate the bulbs.
  • 調光機能: These bulbs are fully dimmable from 10% to 100%. For optimal performance and to avoid flickering or buzzing, use them with LED-compatible dimmers. Adjust the dimmer switch to achieve your desired brightness level.
Illustration showing the dimming range of Hizashi LED bulbs from 0% to 100% brightness.

Image: Visual representation of the smooth dimming capability of Hizashi LED bulbs, from 10% to 100% light output.

Video: An official Hizashi video demonstrating the features and applications of Hizashi Edison Bulbs, including their dimming capabilities and aesthetic appeal in various settings.

メンテナンス

Hizashi LED Edison bulbs are designed for long-lasting performance with minimal maintenance. Follow these guidelines to ensure their longevity:

  • クリーニング: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the bulb's finish or internal components.
  • 交換: These bulbs have an average life of 25,000 hours. When replacement is necessary, follow the installation steps outlined in the "Setup and Installation" section.
  • ストレージ: If storing unused bulbs, keep them in their original packaging in a cool, dry place to prevent damage.

トラブルシューティング

If you encounter issues with your Hizashi LED Edison bulbs, refer to the following common problems and solutions:

問題考えられる原因解決
電球が点灯しないNo power to fixture; Loose connection; Faulty bulbCheck circuit breaker/switch; Tighten bulb in socket; Test bulb in another fixture or replace.
電球がちらついたりブーンという音がするIncompatible dimmer switch; Loose connection; Electrical interferenceEnsure dimmer is LED-compatible; Tighten bulb; Consult an electrician for wiring issues.
電球が適切に調光されないIncompatible dimmer switch; Dimmer not calibrated for LEDReplace with an LED-compatible dimmer; Adjust dimmer's calibration settings if available.
光出力が低すぎる/高すぎる電球ワット数が間違っているtage/lumen for application; Dimmer settingVerify bulb specifications meet needs; Adjust dimmer to desired level.
Comparison image showing a Hizashi LED bulb with no flicker and no dark area versus a standard bulb with flicker and dark area.

Image: A comparison illustrating the flicker-free and omni-directional light output of Hizashi LED bulbs compared to a flickering light source.

仕様

Detailed technical specifications for the Hizashi ST19 Dimmable LED Edison Bulbs:

  • ブランド: ひざし
  • ライトタイプ: 導かれた
  • 特集: 60 Watt Equivalent, 2700K Warm White, 700lm, 6W, 95+CRI, Dimmable, Energy Efficient, UL Listed, Vintageスタイル
  • ワットtage: 6ワット
  • 電球形状サイズ: ST19
  • 電球ベース: E26
  • 白熱相当ワットtage: 60ワット
  • ライトカラー: ウォームホワイト
  • 巻tage: 120ボルト
  • 色温度: 2700ケルビン
  • 輝度: 700ルーメン
  • 形: ドロップポイント
  • 材料: アルミニウム、ガラス
  • 屋内/屋外での使用: 屋内、屋外
  • 電源: AC
  • 演色評価数(CRI): 95
  • ビーム角度: 360度
  • 平均寿命: 25000時間
  • 製品寸法: 幅2.28インチ x 高さ5.3インチ
  • 受理された巻tage頻度: 100~120ボルト、60ヘルツ
  • 電球の特徴: 調光可能

保証とサポート

Hizashi products are manufactured under strict quality guidelines. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Hizashi webサイトでご確認ください。保証請求の際に必要となりますので、購入証明書を保管してください。

© 2026 Hizashi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.