OREiN Matter Smart Bathroom Exhaust Fan with Light User Manual

1. はじめに

Thank you for choosing the OREiN Matter Smart Bathroom Exhaust Fan with Light. This advanced fan integrates ventilation, lighting, Bluetooth audio, and smart control features to enhance your bathroom experience. It is designed for efficient humidity removal, customizable lighting, and seamless integration with popular smart home platforms like Apple Home, Siri, Alexa, Google Home, and SmartThings.

Image: OREiN Matter Smart Bathroom Exhaust Fan with Light, showcasing the fan, remote, and app interface.

This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your device. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. 安全情報

火災、感電、または人への傷害のリスクを軽減するために、次の点に注意してください。

• 本製品は、製造元が指定した方法でのみ設置してください。ご不明な点がございましたら、製造元にお問い合わせください。
• 整備や清掃を行う前に、サービスパネルで電源を切り、サービス遮断装置をロックして、誤って電源が入らないようにしてください。サービス遮断装置をロックできない場合は、目立つ警告装置（例えば、 tag、サービスパネルへ。
• 設置作業および電気配線は、耐火建築基準および基準を含む、適用されるすべての基準および基準に従って、有資格者が行う必要があります。
• 燃料燃焼機器の適切な燃焼と煙突からのガス排出には、十分な空気が必要です。これにより逆流を防ぐことができます。暖房機器メーカーのガイドラインや安全基準（全米防火協会（NFPA）、米国暖房冷凍空調学会（ASHRAE）、および地域の規制当局が発行するものなど）に従ってください。
• 壁や天井を切ったり穴を開けたりするときには、電気配線やその他の隠れた設備を損傷しないようにしてください。
• ダクトファンは常に屋外に排気する必要があります。
• Use this unit only in a bathroom environment.
• このユニットはキッチンでの使用を目的としていません。
• This unit is not intended for use over a bathtub or shower where it would be exposed to direct water spray.

3. パッケージ内容

すべてのコンポーネントが存在し、損傷がないことを確認します。

• OREiN Matter Smart Bathroom Exhaust Fan with Light Unit
• リモートコントロール
• インストールマニュアル
• 乾式壁の切り抜きテンプレート
• 6" to 4" Duct Adapter
• 取り付けハードウェア（ネジ、ワイヤコネクタ）

4. セットアップとインストール

Before beginning installation, ensure the power supply is disconnected at the circuit breaker. This fan is designed for ceiling installation and requires a 2.4GHz Wi-Fi network for smart features.

4.1 Ceiling Opening Dimensions

The fan housing measures 12.87" x 10.59" x 7.91". The light cover size is 13.1" x 13.1". The recommended ceiling opening is 11.39" x 10.42" x 9" square. Use the provided drywall cutout template for accurate sizing.

Image: Detailed diagram showing the fan's dimensions and the required ceiling opening size.

If the hole is too small, trace the housing onto the ceiling and then cut the ceiling with a keyhole saw. If the hole is too big, you'll need to patch the ceiling. The patched areas can be repaired with spackling compound later.

4.2 Preparing the Fan Unit

1. Remove Duct Connector and Wire Cover: Carefully remove the duct connector and the wire cover from the fan housing. This provides access for wiring and duct connection.

Video: Step-by-step guide on how to assemble the Flex-Z fast bracket for installation.

2. Place the Fan Housing: Insert the fan housing into the prepared ceiling opening.
3. Install the Flex Bracket: Secure the fan housing using the Flex Bracket. This bracket allows for easy installation and secure mounting to ceiling joists.

Video: Detailed instructions on how to install the OREiN Bathroom Fan using the bracket method.

4. ワイヤーを接続します: Connect the electrical wires (Green to Green, White to White, Black to Black) using the provided wire connectors. Ensure all connections are secure and follow local electrical codes.
5. Reattach Wire Cover: Once wiring is complete, reattach the wire cover with the short screw.
6. Connect to Circular Duct: Connect the fan to a 6-inch or 4-inch circular duct (not provided). Use duct tape or aluminum tape to ensure air-tight seals and improve efficiency. Avoid deep corrugations in flexible ducting as they can block the damper; semi-rigid aluminum ducting is recommended.
7. 安全なファンハウジング: Pull the 4 tabs of the fan housing into the vertical position and align them with the slot on the telescopic support. Bend the tabs to the sides and secure the fan housing firmly to the telescopic support.

Video: Instructions for installing the OREiN Bathroom Fan without using a bracket.
8. Connect LED Wire: Connect the LED wire to the corresponding plug in the fan housing.
9. Lをインストールしますampシェード： Squeeze both sides of the lampshade spring and insert it into the spring guides to install the lampシェード。

5. 操作手順

The OREiN Smart Bathroom Exhaust Fan offers multiple control options for convenience and customization.

5.1 音声制御

The fan is compatible with Apple Home, Siri, Alexa, Google Home, and SmartThings. A Matter-compatible smart speaker (e.g., HomePod, Echo Dot 3rd Gen+, Nest Mini, Nest Hub, SmartThings Hub, Apple TV) is required for voice control. Ensure your network supports 2.4GHz Wi-Fi (5GHz not supported) and IPv6 network connection.

Image: Illustration of the fan being controlled via voice commands through smart home assistants like Alexa.

To connect with Alexa: Press and hold the "RGB" and "Fan" buttons on the remote for 5 seconds to prepare for network pairing. Open the Alexa app, click '+' to add a device, scroll to find other options, and choose the 'matter' logo. Follow prompts to confirm the device has a Matter logo and is powered on. Scan the Matter QR code to pair. The fan light will flash once with 2700K light when successfully paired.

5.2 Remote & App Control

Control all settings via the included remote control or the AiDot app. The default setting is Light ON / Fan OFF. Use the remote to turn on the fan.

画像: 上view of features controllable via remote and app, including multi-color, CFM, voice control, app control, DIY mode, timer, music sync, Sone rating, Wi-Fi, and humidity sensor.

画像: 詳細 view of the remote control with button functions for Light ON/OFF, Humidity, Play/Pause (Bluetooth pairing), Nightlight ON/OFF, Fan ON/OFF (CFM selection), Brightness Change, RGB color selection, and Music Sync.

• Fan Speed (CFM): Features 110 CFM and 160 CFM airflow options. Long press the fan button on the remote for 5 seconds to switch between 110 CFM (0.8 Sone) and 160 CFM (1.0 Sone).


Image: Visual comparison of airflow for 110 CFM and 160 CFM settings, highlighting quiet and energy-efficient operation.

• 湿度検知モード: The built-in humidity sensor automatically turns on the fan when the humidity level exceeds 60%. The LED indicator light will be green in this mode. You can check real-time humidity reports and adjust settings via the AiDot app.


Image: Depiction of the humidity sensing mode, showing the fan activating when humidity reaches 60%.

• Smart Dimming & CCT Adjustment: The 1500lm main light offers adjustable brightness from 1% to 100% and color temperature (CCT) from 2700K to 6500K. Use the remote or app to customize your lighting.

Image: Visual representation of the smart dimming feature, allowing adjustment of brightness from 1% to 100% and color temperature from 2700K to 6500K.
• 16 Million DIY Colors & Music Sync: Explore 16 million DIY colors and synchronize lighting with music via the Bluetooth speaker. Long press the Play/Pause button on the remote for 5 seconds for Bluetooth pairing.


Image: Illustrates the 16 Million DIY Colors feature, showing vibrant lighting effects in a bathroom setting.

• 常夜灯モード： Activate a soft 200lm 2700K night light for subtle illumination.
• Schedule & Timer: Use the AiDot app to set schedules for timed opening or delayed closing of the fan and light, optimizing energy usage and convenience.


Image: Screenshot of the AiDot app interface demonstrating how to add schedules and timers for the fan and light.

6. メンテナンス

Regular maintenance ensures optimal performance and extends the lifespan of your OREiN Smart Bathroom Exhaust Fan.

• Cleaning the Grille and Light Cover: Periodically remove the grille and light cover. Wash them in warm, soapy water, rinse thoroughly, and dry completely before reattaching.
• ファンハウジングのクリーニング: 広告を使用するamp cloth to wipe down the interior and exterior of the fan housing. Do not use abrasive cleaners or solvents.
• モーター潤滑: ファンモーターは永久的に潤滑されており、追加の給油は必要ありません。
• ダクト検査: Annually inspect the ductwork for any blockages, leaks, or damage. Ensure all connections remain air-tight.

7。 トラブルシューティング

If you encounter issues with your OREiN Smart Bathroom Exhaust Fan, refer to the following common problems and solutions:

これらの解決策を試しても問題が解決しない場合は、OREiN カスタマー サポートにお問い合わせください。

8. 仕様

9. 保証とサポート

OREiN provides a warranty for this product against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the product packaging or contact OREiN customer support.

For technical assistance, troubleshooting, or warranty claims, please contact OREiN customer support:

• オンラインサポート： 訪問する OREiN Brand Store on Amazon.
• 電話サポート: 1(844)506-1530 (24-Hour Service)

You can also find the official installation manual in PDF format ここ.