REPTITRIP Dual Reptile Light Fixture (Model LFD02) Instruction Manual

1. はじめに

This manual provides detailed instructions for the safe and effective use of your REPTITRIP Dual Reptile Light Fixture, Model LFD02. This fixture is designed to provide essential heat and UVB lighting for various reptiles, enhancing their health and well-being in terrarium environments.

Image 1.1: The REPTITRIP Dual Reptile Light Fixture installed above a reptile terrarium, providing light and heat.

2. 重要な安全上の注意事項

• 使用前にすべての指示をお読みください。
• 電源のボリュームを確認してくださいtage matches the fixture's requirements (100-120 Volts, 50 Hertz).
• 最大ワット数を超えないでくださいtagソケットあたり160W。
• This product is for indoor, dry use only. Avoid contact with water or high humidity.
• Always disconnect power before installing, removing, or cleaning bulbs or the fixture.
• The fixture surface can become very hot during operation. Avoid direct contact.
• Keep away from flammable products and other explosive items.
• Periodically inspect the power cord and fixture for any damage. Do not use if damaged.

Image 2.1: The fixture includes warning labels for hot surfaces and a fireproof/flame-retardant cable management sleeve for safety.

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• REPTITRIP Dual Reptile Light Fixture (Model LFD02)
• 製品マニュアル
• Note: Reptile bulbs are not included and must be purchased separately.

4. セットアップ手順

4.1 電球の取り付け

1. Ensure the fixture is unplugged from the power source.
2. Carefully screw the desired E26 base reptile heat or UVB bulbs into each socket. Do not overtighten.
3. Ensure each bulb's wattageは160Wを超えません。

Image 4.1: The fixture is compatible with various E26 base bulbs, including heat lamps, UVB bulbs, and solar bulbs.

4.2 配置と取り付け

The fixture can be placed directly on a screen top or hung using the integrated hook.

• On Screen Top: Place the fixture securely on the terrarium's screen top, ensuring it is stable and cannot be easily dislodged.
• ぶら下がっている： Use the integrated hook to suspend the fixture above the terrarium. Ensure the hanging mechanism is robust enough to support the fixture's weight and is positioned at an appropriate distance from the reptile to prevent burns.

画像4.2: lampshade is removable for easier bulb installation and cleaning. The image also illustrates the fixture's dimensions.

5. 操作手順

The REPTITRIP Dual Reptile Light Fixture features two independent switches on its power cord, allowing separate control of each bulb.

1. 電源コードを適切な電源コンセントに差し込みます。
2. Use the individual ON/OFF switches to control each bulb independently. This allows for flexible lighting and heating schedules, such as operating a heat lamp and a UVB lamp 必要に応じて。

Image 5.1: The power cord features two distinct switches for independent control of each bulb.

5.1 High-Temperature Warning Label

The fixture is equipped with a triangular warning label that turns red if the surface temperature exceeds 113°F (45°C). This serves as a visual indicator of high temperature and can also help verify if a ceramic heat lamp 正常に機能しています。

6. メンテナンス

6.1 クリーニング

• Always unplug the fixture and allow it to cool completely before cleaning.
• Wipe the exterior of the fixture with a soft, dry cloth. Do not use abrasive cleaners or immerse the fixture in water.
• Lampshade can be removed for easier cleaning of the interior reflective surface.

6.2 電球の交換

• Ensure the fixture is unplugged and bulbs are cool before attempting replacement.
• Unscrew the old bulb and screw in the new E26 base reptile bulb, ensuring it does not exceed 160W.

7。 トラブルシューティング

8. 仕様

Image 8.1: Physical dimensions of the REPTITRIP Dual Reptile Light Fixture.

9. 保証とサポート

For warranty information, please refer to the manufacturer's warranty description provided with your purchase documentation or contact REPTITRIP customer support directly.

For further assistance or inquiries, please visit the official REPTITRIP store or contact their customer service department.

Official REPTITRIP Store: REPTITRIP Store on Amazon

10. 製品ビデオ