Pro-Ject T1 Evo フォノターンテーブル ユーザーマニュアル

導入

The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.

セットアップガイド

1. 開梱と設置

すべての部品をパッケージから慎重に取り出してください。ターンテーブルは、直射日光、熱源、過度の振動を避け、安定した平らな場所に置いてください。ユニットの周囲に十分な換気を確保してください。

Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.

Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.

2. 組み立て

1. プラッターをスピンドルの上に置きます。
2. Carefully place the felt mat on top of the platter.
3. Attach the dust cover by aligning its hinges with the slots on the turntable's base.

3. 接続

Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your ampハムを最小限に抑えるために、ライファイヤーのアース端子を使用します。

Figure 3: Rear connections for RCA output and ground wire.

Connect the power adapter to the turntable and then to a wall outlet.

操作手順

1. 電源のオン/オフ

Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.

Figure 4: Power switch location.

2. レコードの再生

1. Ensure the dust cover is open or removed.
2. Place your vinyl record onto the felt mat on the platter.
3. Carefully remove the stylus protector from the cartridge.
4. トーンアームリフトレバーを使用してトーンアームを持ち上げます。
5. トーンアームをレコードの希望する開始溝の上にゆっくり動かします。
6. Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
7. To stop playback, lift the tonearm using the lever and return it to its rest.

Figure 5: Tonearm and Ortofon OM 10 cartridge.

Figure 6: Ortofon OM 10 cartridge detail.

3. Bluetooth接続

The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.

メンテナンス

1. ターンテーブルのクリーニング

• Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.

2. スタイラスのお手入れ

• 定期的にスタイラスにほこりやゴミが付着していないか点検してください。
• Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
• Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.

トラブルシューティング

仕様

保証とサポート

保証情報

This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.

カスタマーサポート

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject web連絡先の詳細と追加リソースについては、サイトをご覧ください。

Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.