Ankilo Bluetoothトランスミッターレシーバー ユーザーマニュアル

導入

The Ankilo 2-in-1 Bluetooth Transmitter Receiver is a versatile audio adapter designed to enhance your audio experience. It allows you to wirelessly transmit audio from non-Bluetooth devices (like TVs, PCs, or airplane entertainment systems) to Bluetooth headphones or speakers (TX mode), or receive audio from Bluetooth-enabled devices (like smartphones or tablets) and play it through wired speakers or car stereos (RX mode). Featuring Bluetooth 5.3 technology, it offers stable connections, low latency, and clear audio.

Image: The Ankilo 2-in-1 Bluetooth Transmitter Receiver, a compact black device with a 3.5mm audio jack, volume buttons, and a mode switch.

安全情報

デバイスを使用する前に、次の安全情報をよくお読みください。

• バッテリーの取り扱い上の注意: Do not disassemble, puncture, or modify the device. Avoid exposing the battery to extreme temperatures (above 60°C/140°F) or direct sunlight. Dispose of the device and battery according to local regulations.
• 潜在的な干渉: This device operates using radio frequencies and may cause interference with other electronic devices, medical equipment (e.g., pacemakers), or aircraft navigation systems. Always follow regulations and turn off the device where prohibited.
• お子様の手の届かない場所に保管してください。
• 落としたり、強い衝撃を与えないでください。
• 水や過度の湿気にさらさないでください。

製品終了view

Familiarize yourself with the components and controls of your Ankilo Bluetooth Transmitter Receiver.

Image: A detailed diagram showing the components of the Ankilo Bluetooth adapter, including the AUX connector, volume/track buttons, M button (mode/pairing), indicator light, TX/RX switch, and charging port.

• 1. AUX Connector: オーディオ ソースまたは出力デバイスに接続するための 3.5 mm オーディオ ジャック。
• 2. '+' Button: Click for Next Song (RX mode), Long press for Increase Volume.
• 3. '-' Button: Click for Previous Song (RX mode), Long press for Decrease Volume.
• 4. 'M' Button: Multi-function button for mode selection and pairing.
• 5. インジケーターライト: デバイスのステータス (ペアリング、接続、充電) を表示します。
• 6. TX/RX Switch Button: 送信機 (TX) モードと受信機 (RX) モードを切り替えます。
• 7.充電ポート: デバイスを充電するための USB-C ポート。

セットアップと操作

デバイスの充電

Before first use, fully charge the device. Connect the provided USB-C cable to the charging port on the adapter and the other end to a USB power source (e.g., computer USB port, wall adapter). The indicator light will show charging status and turn off when fully charged.

画像: 爆発した view of the Ankilo Bluetooth adapter showing the internal battery and circuit board, with a USB-C cable connected to the charging port. Text indicates 2 hours charge time, 14 hours RX mode battery life, and 11 hours TX mode battery life.

トランスミッタ（TX）モード

TX モードでは、デバイスは Bluetooth 以外のソースからのオーディオを Bluetooth ヘッドフォンまたはスピーカーに送信します。

1. TXモードに切り替える: Slide the TX/RX switch button to the 'TX' position.
2. オーディオソースに接続: Plug the 3.5mm AUX connector of the adapter into the audio output port of your non-Bluetooth device (e.g., TV, PC, airplane entertainment system).
3. 電源オン: Long-press the 'M' button for 3 seconds to turn on the adapter. The indicator light will blink red, indicating it's in pairing mode.
4. Bluetoothヘッドフォン/スピーカーとペアリングする: Put your Bluetooth headphones or speakers into pairing mode. Place them close to the Ankilo adapter. The adapter will automatically search and connect.
5. 接続に成功しました： Once connected, the red indicator light will blink slowly. Audio from your source device will now be transmitted to your Bluetooth headphones/speakers.

注記： For the first pairing, it may take 1-3 minutes. Subsequent pairings will be faster. Ensure other Bluetooth devices are turned off to avoid interference during pairing.

Image: A visual guide demonstrating the steps for connecting the Ankilo adapter in TX mode, showing the switch, plugging into a TV, and pairing with headphones.

Image: An illustration of the Ankilo adapter being used in TX mode on an airplane, plugged into the seat-back entertainment system, transmitting audio to wireless earbuds.

レシーバー（RX）モード

In RX mode, the device receives audio from a Bluetooth-enabled source (like your smartphone) and plays it through wired speakers or car stereos.

1. RXモードに切り替える: Slide the TX/RX switch button to the 'RX' position.
2. オーディオ出力デバイスに接続します: Plug the 3.5mm AUX connector of the adapter into the audio input port of your wired speaker, car stereo, or home sound system.
3. 電源オン: Long-press the 'M' button for 3 seconds to turn on the adapter. The indicator light will blink blue, indicating it's in pairing mode.
4. Bluetooth デバイスとペアリングします: On your smartphone or tablet, enable Bluetooth and search for "BT-13" (or similar device name). Select it to connect.
5. 接続に成功しました： Once connected, the blue indicator light will blink slowly. Audio from your Bluetooth device will now play through your wired speakers.

Image: A visual guide demonstrating the steps for connecting the Ankilo adapter in RX mode, showing the switch, plugging into speakers, and pairing with a smartphone.

Image: An illustration of the Ankilo adapter being used in RX mode in a car, plugged into the car's AUX input, receiving audio from a smartphone.

メンテナンス

To ensure the longevity and optimal performance of your Ankilo Bluetooth Transmitter Receiver, follow these maintenance guidelines:

• クリーニング： デバイスの清掃には、柔らかく乾いた布をご使用ください。液体クリーナーやエアゾールは使用しないでください。
• ストレージ： デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• 物理的損傷を避ける: Do not drop, bend, or expose the device to strong impacts.
• 充電： 充電には付属の USB-C ケーブルまたは認定された同等のケーブルのみを使用してください。

トラブルシューティング

仕様

保証とサポート

Ankilo products are designed for reliability and performance. For any questions or support needs, please contact our customer service.

• 顧客サービス： Refer to the contact information provided with your product packaging or visit the official Ankilo webサポートサイト。
• 保証： This product typically comes with a 12-month quality protection warranty. Please retain your proof of purchase for warranty claims.
• 返品/交換: Refer to the retailer's return policy for details on returns or replacements.