REPTITRIP 27-Inch LED UVB Reptile Light Instruction Manual

1. はじめに

Thank you for choosing the REPTITRIP 27-Inch LED UVB Reptile Light. This 22W aluminum UVA UVB lamp with a controller is designed to provide essential lighting for your reptiles, including turtles, snakes, and bearded dragons. It features dimming capabilities and four UVI modes to simulate natural light cycles, operating at a 6500K color temperature. Proper UVB and UVA exposure is crucial for reptile health, aiding in calcium absorption and preventing bone deformities. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and the well-being of your pets.

2. 安全に関する注意事項

• Always ensure the power supply is disconnected before installation, cleaning, or maintenance.
• Do not look directly into the UV light source. Prolonged direct exposure to UV light can be harmful to human and animal eyes.
• This product is designed for indoor use only within reptile enclosures. Do not use it in wet environments or outdoors.
• Keep the light fixture and controller away from water and excessive humidity.
• 電気による危険を防ぐために、すべての接続が安全かつ適切に絶縁されていることを確認してください。
• The LED light emits cool white light and does not generate significant physical heat. If heating is required for your reptile, use it in conjunction with a separate reptile heating pad or heating lamp.
• For accurate UVB data, use professional equipment. UVB cards may not provide precise results.

3. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認してください。

• REPTITRIP LED UVB Light Fixture (27-Inch)
• 統括制御部
• 取り付けブラケット
• 取り付けアクセサリ（ネジ、粘着パッドなど）

4 製品の特徴

• Reptile-Friendly Lighting: Provides essential UVB and UVA spectrums, mimicking natural sunlight to support calcium absorption and prevent metabolic bone disease.
• エネルギー効率: Utilizes high-efficiency LED and UV beads for low power consumption (22W) and high luminous efficiency, with a cool white light of 6500K.
• Multi-Mode Controller: Features four preset light modes (M1/M2/M3/M4) to adapt to various environmental needs and Ferguson zones (1-4). A manual mode (M0) allows for customized light intensity.
• 耐久性のある構造: Made from aluminum alloy for enhanced heat dissipation and a projected lifespan of over 7,000 hours.
• 多目的な設置: Can be mounted on tank mesh, hung inside with included brackets, or suspended from a wooden board.
• 日の出/日の入りシミュレーション: The controller automatically adjusts light and UV intensity to simulate natural day-night cycles.

5. セットアップとインストール

The REPTITRIP LED UVB light offers flexible installation options to suit various reptile enclosures.

1. 取り付け場所を選択: Determine the best placement for your light based on your enclosure type and reptile's needs. Common options include:
• Above the Ventilation Mesh: Place the light directly on top of the mesh lid.
• Underneath the Ventilation Mesh: Use the included brackets to hang the light inside the enclosure, just below the mesh.
• Suspended from Wooden Boards: Secure the light to a wooden surface above the enclosure using appropriate fasteners.
2. ブラケットを取り付ける: Secure the mounting brackets to the light fixture using the provided screws.
3. ライトの取り付け: Position the light in your chosen location and secure it using the appropriate mounting accessories. Ensure the light is stable and cannot fall into the enclosure.
4. 接続電源： Plug the controller into a standard 120V power outlet.

6. 操作手順

The integrated controller allows for easy adjustment of light modes and intensity.

6.1 コントローラーオーバーview

The controller features a display for time and light intensity, along with buttons for mode selection (M0-M4), adjustment (+/-), SET, and OK.

6.2 Setting Time and Modes

1. 電源オン: Plug the light into a power source. The display will illuminate.
2. 現在の時刻を設定: Press the 'SET' button. Use the '+' and '-' buttons to adjust the hour, then press 'SET' again to move to minutes. Repeat to set minutes. Press 'OK' to confirm.
3. 動作モードを選択: The controller offers five modes:
• M0 (Manual Mode): Allows you to manually set the light intensity. Use '+' and '-' to adjust the percentage of light output.
• M1, M2, M3, M4 (Automatic Modes): These modes simulate natural sunrise and sunset cycles with varying light intensity profiles throughout a 24-hour period, corresponding to different Ferguson zones (1-4). Select the mode appropriate for your reptile species.
4. アクティブ化モード: Once your desired mode (M0, M1, M2, M3, or M4) is selected, press 'OK' to activate it. The light will now operate according to the chosen settings.

6.3 Night Light Brightness Adjustment

To set the night light brightness to 0% in M1/M2/M3/M4 modes, press and hold both the "+" and "-" buttons simultaneously on the controller.

6.4 Understanding Automatic Modes (M1-M4)

These modes automatically adjust light and UV intensity to simulate a natural day-night cycle, promoting healthy behavior in reptiles. Each mode corresponds to different UVI requirements (Ferguson Zones).

6.5 Ferguson Zones and Luminance

The light's output can be adjusted to match different Ferguson Zones, which categorize reptiles based on their natural UV exposure needs. The luminance charts below provide guidance for optimal UVI levels at various distances.

7. メンテナンス

• クリーニング： Regularly wipe the light fixture with a soft, dry cloth to remove dust and debris. Ensure the light is unplugged before cleaning. Do not use harsh chemicals or abrasive cleaners.
• 検査： Periodically check the power cord and connections for any signs of damage. If any damage is found, discontinue use and contact customer support.
• 電球の交換: This LED fixture has a long lifespan of over 7,000 hours and does not require bulb replacement.

8。 トラブルシューティング

9. 仕様

10. 保証とサポート

REPTITRIP products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your REPTITRIP LED UVB Reptile Light, please refer to the contact information provided with your purchase or visit the official REPTITRIP webサイトでご確認ください。保証請求のために購入証明書を保管してください。