YUHANUS YH-G1501-OP22-280-RT

YUHANUS 600lb Electric Magnetic Lock Kit User Manual

Model: YH-G1501-OP22-280-RT

導入

This manual provides comprehensive instructions for the installation, operation, and maintenance of your YUHANUS 600lb Electric Magnetic Lock Kit. This system is designed to provide secure and convenient access control for various door types, featuring multiple entry methods including RFID cards, PIN codes, and remote control. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

製品構成

The YUHANUS 600lb Electric Magnetic Lock Kit includes the following main components:

  • Access Control Keypad: For PIN and RFID card entry.
  • 600lb Electromagnetic Lock: Provides strong locking force.
  • Power Supply Control Box: Manages power distribution and system logic.
  • Press to Exit Button: For convenient egress from the secured area.
  • Doorbell Chime: Alerts occupants to visitors.
  • リモートコントロール: For wireless door unlocking.
  • RFIDカード: For card-based access.
  • Mounting Brackets (Z and L): For various installation types.
YUHANUS 600lb Electric Magnetic Lock Kit components

画像: 上view of the YUHANUS 600lb Electric Magnetic Lock Kit components, including the keypad, magnetic lock, power supply, exit button, doorbell, and remote controls.

設定

1.配線図

Carefully follow the wiring diagram to connect all components. Ensure all connections are secure and correctly polarized to prevent damage to the system.

Wiring Diagram of the YUHANUS Access Control System

Image: Detailed wiring diagram illustrating connections between the access control keypad, power supply, magnetic lock, exit button, doorbell, and remote control receiver.

2. コンポーネントのインストール

Install each component in its designated location. The access control keypad is typically mounted on the exterior side of the door, while the magnetic lock is installed on the door frame and door. The power supply control box should be placed in a secure, dry location. The exit button and doorbell chime are for interior use.

  • Access Control Keypad: Mount the keypad at a convenient height near the door.
  • Electromagnetic Lock: Install the magnetic lock on the door frame and the armature plate on the door using the appropriate Z and L brackets for your door type. Ensure proper alignment for secure locking.
  • Power Supply Control Box: Connect the AC power input (110V-240V) to the power supply. Connect the output to the access control system components as per the wiring diagram.
  • Press to Exit Button: Mount the exit button on the interior side of the door.
  • Doorbell Chime: Connect the doorbell chime to the keypad as indicated in the wiring diagram.
NFC Keypad

Image: Close-up of the NFC Keypad, showing the numeric keys and doorbell icon.

Waterproof Magnetic Lock

Image: The 600lb waterproof electromagnetic lock and its armature plate.

Z and L Bracket

Image: Z and L brackets used for mounting the magnetic lock on different door types.

ドアベルチャイム

Image: The doorbell chime unit.

Push to Exit Button

Image: The 'Press to Exit' button for interior door release.

リモートコントロール

Image: A remote control for wireless door access.

操作手順

1. 初期設定とマスターコード

The default master code for the access control keypad is typically 9999. This code is used to enter programming mode to set new PINs, add cards, and configure system settings. It is highly recommended to change the default master code immediately after installation.

2. Setting a New PIN Code

To set a new PIN code:

  1. プレス *9999# (default master code).
  2. プレス 5 to enter the new PIN setting mode.
  3. 入力してください 新しいPIN (例: 1234)。
  4. プレス #.
  5. Re-enter your 新しいPIN.
  6. プレス # 確認します。

Video: Demonstration of setting a new PIN code on the access control keypad.

3. Opening the Door by PIN

To open the door using a PIN code:

  1. 入力してください PINコード キーパッドで。
  2. プレス #. The lock will disengage for a set period.

Video: Demonstration of opening the door using a PIN code on the access control keypad.

4. Adding New RFID Cards

To add new RFID cards to the system:

  1. プレス *9999# (master code).
  2. プレス 1 to enter card adding mode.
  3. Swipe each new RFID card over the keypad. The keypad will beep to confirm each card is added.
  4. プレス # to exit card adding mode.

Video: Demonstration of adding new RFID cards to the access control system.

5. Opening the Door by RFID Card

To open the door using an RFID card:

  1. Swipe a registered RFID card over the keypad. The lock will disengage.

Video: Demonstration of opening the door using an RFID card.

6. リモコンの使用

The remote control provides wireless access to unlock the door. Press the unlock button on the remote to disengage the magnetic lock.

Video: Demonstration of using the remote control to unlock the door.

7. ドアベル機能

Visitors can press the doorbell icon on the access control keypad. This will activate the indoor doorbell chime, alerting occupants.

Video: Demonstration of the doorbell function and indoor door release.

メンテナンス

Regular maintenance ensures the longevity and optimal performance of your access control system:

  • クリーニング： Wipe the keypad and magnetic lock surfaces with a soft, damp 布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
  • 接続チェック: すべての配線接続が安全で腐食がないことを確認するために定期的に点検してください。
  • 磁気ロックの位置合わせ: Ensure the magnetic lock and armature plate remain properly aligned. Misalignment can reduce holding force.
  • ファームウェアの更新： メーカーの website for any available firmware updates for the keypad or power supply.

トラブルシューティング

If you encounter issues with your YUHANUS Electric Magnetic Lock Kit, refer to the following troubleshooting guide:

問題考えられる原因解決
ロックが作動/解除されません。Incorrect wiring, power supply issue, magnetic lock misalignment, faulty component.Verify all wiring connections against the diagram. Check power supply output. Ensure magnetic lock and armature plate are aligned. Test components individually if possible.
キーパッドが反応しません。No power, loose connection, keypad malfunction.Check power to the keypad. Ensure keypad wiring is secure. If issues persist, the keypad may need replacement.
RFID カードが機能しません。Cards not programmed, incorrect card type, faulty keypad reader.Ensure cards are properly programmed following the 'Adding New RFID Cards' section. Verify card compatibility.
リモコンが機能しない。Remote battery dead, remote not paired, receiver issue.Replace remote battery. Ensure remote is paired with the system receiver. Check receiver wiring.
Doorbell chime not sounding.Incorrect wiring, chime malfunction.Check doorbell chime wiring connections. Ensure the chime unit is receiving power.

仕様

  • ブランド： ユハヌス
  • モデル番号: YH-G1501-OP22-280-RT
  • ロックタイプ: 電磁ロック
  • 保持力： 600ポンド
  • アクセス方法: PIN, RFID Card, Remote Control
  • キーパッド： Waterproof RFID Keypad
  • 電源: Battery Powered (for some components, main power supply is AC 110-240V to DC 12V)
  • 巻tage: 12 ボルト (DC)
  • 制御方法: リモート、タッチ
  • 商品の寸法 (長さ x 幅 x 高さ): 12 x 7 x 3インチ
  • 商品の重量: 6.32ポンド
  • 国際コード: 769894491157

保証情報

This YUHANUS product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and duration, refer to the product packaging or contact YUHANUS customer support.

サポート

For technical assistance, troubleshooting, or further inquiries, please contact YUHANUS customer support:

  • メールアドレス: support@yuhanus.com (example）
  • 電話： 1-800-XXX-XXXX（例：ample）
  • Webサイト： www.yuhanus.com （元ample）

Please have your model number (YH-G1501-OP22-280-RT) and purchase date available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.