KEF Q7 メタ

KEF Q7 Meta フロアスタンディングスピーカー ユーザーマニュアル

モデル: Q7 メタ

導入

The KEF Q7 Meta Floorstanding Speaker is engineered to deliver impactful bass and sonic clarity for an immersive audio experience. This manual provides detailed instructions to help you set up, operate, and maintain your speaker for optimal performance.

Key features of the Q7 Meta include:

  • メタマテリアル吸収技術(MAT): ドライバー背面からの不要な音を99%吸収し、純粋で自然なサウンド再生を実現します。
  • 第12世代Uni-Qドライバー: 単一の点音源として機能し、音を均一に分散させ、没入感のあるまとまりのあるサウンドを作り出します。tag明瞭性が向上しました。
  • 洗練されたクロスオーバー: Ensures seamless integration of all speaker components, optimized for precise signal path and performance.
  • ハイブリッドベースドライバー設計: Provides stiffness for piston-like movement, resulting in better bass punch and speed.
  • 現代的なミニマリストデザイン: Features a satin finish that blends effortlessly into various interior styles.

設定

Proper placement and connection are crucial for maximizing the performance of your KEF Q7 Meta speakers.

開梱

スピーカーを梱包から慎重に取り出してください。梱包材はすべて保管し、将来の輸送や保管に備えてください。

配置

Position the floorstanding speakers on a sturdy, level surface. For optimal stereo imaging, place the speakers equidistant from your primary listening position and away from room corners to avoid excessive bass buildup. Experiment with toe-in (angling the speakers slightly inward) to fine-tune the soundstage.

KEF Q7 Meta Floorstanding Speakers in a living room setting

Figure 1: KEF Q7 Meta Floorstanding Speakers in a typical room setup.

接続

スピーカーを amplifier or receiver using high-quality speaker wire. Ensure correct polarity (+ to + and - to -) for each speaker. The Q7 Meta features standard binding posts for secure connections.

後方 view of KEF Q7 Meta speaker showing binding posts

図2:背面 view of the KEF Q7 Meta speaker, highlighting the binding posts for ampリファイア接続。

オペレーティング

Once properly set up, your KEF Q7 Meta speakers are ready to deliver exceptional audio. Ensure your amp受信機/コントローラの電源がオンになっており、正しい入力ソースに設定されています。

Grille Installation/Removal

The Q7 Meta speakers are designed to perform optimally with or without the magnetic grilles. The grilles protect the drivers from dust and physical damage. To remove, gently pull the grille away from the speaker cabinet. To install, align the grille with the speaker front and allow the magnets to secure it in place.

Close-up of KEF Q7 Meta speaker with magnetic grille attached

Figure 3: KEF Q7 Meta speaker with its magnetic grille in place.

Close-up of KEF Q7 Meta speaker without magnetic grille, showing the Uni-Q driver and bass drivers

Figure 4: KEF Q7 Meta speaker with the magnetic grille removed, revealing the drivers.

サウンドの最適化

The Q7 Meta speakers feature advanced technologies for superior sound. The 12th Generation Uni-Q driver ensures a wide sweet spot, while Metamaterial Absorption Technology (MAT) significantly reduces distortion. For best results, ensure your audio source is of high quality.

Diagram illustrating Metamaterial Absorption Technology (MAT) in a speaker driver

Figure 5: Illustration of Metamaterial Absorption Technology (MAT) for reduced distortion.

爆発した view diagram of the KEF Uni-Q driver array

図 6: 分解 view of the 12th Generation Uni-Q driver array.

メンテナンス

KEF Q7 Meta スピーカーの寿命を延ばし、最適なパフォーマンスを確保するには、次の簡単なメンテナンス ガイドラインに従ってください。

  • クリーニング: Use a soft, dry cloth to wipe the cabinet surfaces. Avoid abrasive cleaners or solvents. For grilles, a soft brush or vacuum cleaner with a brush attachment can remove dust.
  • 環境: スピーカーは直射​​日光、熱源、湿気の多い場所に置かないでください。スピーカーの周囲に十分な換気を確保してください。
  • 取り扱い: 損傷の原因となる可能性があるため、スピーカーコーンやツイーターに直接触れないようにしてください。

トラブルシューティング

If you encounter any issues with your KEF Q7 Meta speakers, consider the following common solutions:

  • 音が出ない: スピーカーとコンピューター間のすべてのケーブル接続を確認してください。 amp送受金者。 amp電源がオンになっており、正しい入力に設定されています。スピーカーケーブルの極性を確認してください。
  • 歪んだ音: Reduce the volume level. Check for loose connections. Ensure the speakers are not overdriven by the amplifier。
  • 不均一な音: スピーカーの配置を確認し、リスニングポジションから等距離にあることを確認してください。バランス設定を確認してください。 amplifier。
  • 低音不足: Ensure speakers are not placed too far from walls. Check for proper subwoofer integration if applicable.

If problems persist, consult the KEF support webサイトをご覧いただくか、カスタマーサービスにお問い合わせください。

仕様

特徴仕様
取り付けタイプ床立ち
材料アルミニウム
モデル名Q7 メタ
スピーカータイプタワー
特集Metamaterials Absorption Technology (MAT)
推奨用途For Music and Movies
対応デバイスSmartphone, Tablet, Laptop, Desktop, Television, Projector, Home Theater, MP3 Player
ユニット数1.0 カウント
サラウンドサウンドチャンネル構成3.0
製品寸法奥行き12.4インチ x 幅12.5インチ x 高さ39.4インチ
アイテム重量53.2 ポンド (24.2 キログラム)
インピーダンス4オーム
保証タイプ限定
アイテム数1
制御方法触る
スピーカーサイズ12.4インチ
電源コード式電気
信号対ノイズ比60デシベル
ウーファー直径6.5インチ
ツイーター直径19ミリメートル
オーディオドライバータイプダイナミックドライバ
サブウーファー接続技術有線
具体的な用途Home Entertainment Systems, Cinemas
欧州連合637203219030
スタイルサテンホワイト
屋内/屋外での使用屋内
メーカーケフ
スピーカー最大出力200ワット
周波数応答20 kHz
接続技術スピーカーワイヤー
オーディオ出力モードステレオ

箱の中身

Your KEF Q7 Meta Floorstanding Speaker package includes:

  • KEF Q7 Meta フロアスタンディングスピーカー(1台)
  • 保証書

保証とサポート

The KEF Q7 Meta Floorstanding Speaker comes with a limited warranty. Please refer to the included Warranty Card for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please visit the official KEF website or contact their customer service department. Keep your purchase receipt and serial number handy for faster service.

製品ビデオ

このビデオを最後までご覧くださいview of KEF Floorstanding Speakers:

ビデオ1: オーバーview of KEF Floorstanding Speakers, providing insights into their design and performance. This video is provided by a seller and is relevant to the product category.

© 2024 KEF. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.