KEF Q11 Meta フロアスタンディングスピーカー ユーザーマニュアル

導入

Thank you for choosing the KEF Q11 Meta Floorstanding Speaker. This manual provides essential information for the safe and optimal use of your speaker. Please read it thoroughly before installation and operation, and retain it for future reference.

Image: The KEF Q11 Meta Floorstanding Speaker in its white finish, showcasin洗練されたデザイン。

The KEF Q11 Meta is a high-fidelity floorstanding speaker designed to deliver immersive audio performance. It features KEF's advanced Meta material technology and the 12th generation Uni-Q driver array, ensuring clear, detailed, and powerful sound reproduction for both music and home theater systems.

安全情報

Please observe the following safety precautions to prevent damage to the speaker and ensure user safety:

• Do not expose the speaker to excessive heat, direct sunlight, or moisture.
• 過熱を防ぐために、スピーカーの周囲に適切な換気を確保してください。
• Use only the recommended power source and speaker wire connections.
• スピーカーの上に重い物を置かないでください。
• スピーカーを強い磁場から遠ざけてください。
• スピーカーを分解したり改造したりしないでください。修理は必ず資格のある専門家にご依頼ください。
• Position the speaker on a stable, level surface to prevent tipping.

設定

1.開梱

Carefully remove the speaker from its packaging. Retain all packaging materials for future transport or storage. Inspect the speaker for any signs of damage during transit. If damage is found, contact your dealer immediately.

2.配置

Optimal speaker placement is crucial for sound quality. Consider the following guidelines:

• ステレオ設定: スピーカーを主なリスニング位置から等距離に配置し、正三角形を形成します。
• 壁からの距離: Experiment with distance from walls to control bass response. Generally, a few feet from the rear and side walls is a good starting point.
• 室内音響: Room furnishings and materials can affect sound. Adjust placement to minimize reflections and optimize soundstage.
• 安定性： Ensure the speaker is placed on a stable, level surface. The Q11 Meta is designed for indoor usage.

Image: A KEF Q11 Meta Floorstanding Speaker integrated into a modern living room setup, demonstrating typical placement.

3. 接続

Connect the Q11 Meta speakers to your amplifier or receiver using high-quality speaker wire. Ensure correct polarity (+ to + and - to -) for optimal sound performance.

• スピーカーワイヤー: Use appropriate gauge speaker wire for the length of your run.
• バインディングポスト: The Q11 Meta features robust binding posts. Unscrew the terminal caps, insert the stripped wire ends, and tighten securely.
• インピーダンス: The speaker has an impedance of 4 Ohms. Ensure your amplifier is compatible with this load.
• オーディオ出力モード： The speaker supports surround sound configurations, typically 2.0 for stereo or as part of a larger home cinema system.

Image: The rear panel of the KEF Q11 Meta speaker, highlighting the gold-plated binding posts for speaker wire connection.

操作手順

1.電源のオン/オフ

The KEF Q11 Meta speakers are passive and do not have a separate power switch. They receive power directly from your connected ampライフファイア。 amplifier is powered on and off according to its own manual.

2.オーディオ再生

接続したら amplifier and an audio source (e.g., music player, home theater system, game console, television), you can begin playing audio. Adjust the volume and other audio settings on your amplifier or source device. The Q11 Meta is compatible with various devices including desktop systems, home theaters, and MP3 players.

The Q11 Meta features advanced technologies for superior sound:

• Meta Material Technology: Absorbs 99% of unwanted sound from the rear of the driver, resulting in purer, more natural sound.
• Uni-Qドライバーアレイ： Acts as a single point source, dispersing sound evenly for an immersive and cohesive soundstage.
• ハイブリッドベースドライバー設計: Provides stiffness for piston-like movement, delivering precise and agile bass.

画像: 詳細な view of the Meta Material Technology, designed to absorb unwanted sound.

Image: A close-up of the KEF Uni-Q Driver Array, showing the tweeter positioned at the acoustic center of the midrange cone.

画像: 爆発した view illustrating the components of KEF's Hybrid Bass Driver, designed for powerful and precise low-frequency reproduction.

メンテナンス

クリーニング

To maintain the appearance and performance of your KEF Q11 Meta speakers:

• Wipe the cabinet with a soft, dry, lint-free cloth.
• 研磨剤入りのクリーナー、溶剤、強力な洗剤は仕上げを傷める可能性があるため、使用しないでください。
• 頑固な汚れには、軽くampen the cloth with water, then dry immediately.
• Avoid touching the driver cones directly.

トラブルシューティング

If you experience issues with your KEF Q11 Meta speakers, refer to the following common problems and solutions:

• 音が出ない:
  • スピーカーと amp確実な接触と正しい極性を確保するライファイア端。
  • 確実に amp機器の電源がオンになっており、正しい入力ソースが選択されています。
  • お使いのコンピュータのボリュームが amp音量が最小またはミュートに設定されていません。
• 歪んだ音:
  • 音量レベルを下げてください amplifier。
  • スピーカー ワイヤの接続部に緩んだ部分がないか確認し、ショートの原因となっている可能性があることを確認します。
  • 確実に ampライファイアはオーバードライブされていません。
• Uneven Sound (one speaker louder/softer):
  • Check individual speaker wire connections for looseness or incorrect polarity.
  • Verify balance settings on your amplifier。
  • Ensure speakers are placed symmetrically in the room.

If the problem persists after trying these steps, please contact KEF customer support or your authorized dealer.

仕様

保証情報

The KEF Q11 Meta Floorstanding Speaker comes with a limited warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.

サポート

さらなる支援、技術サポート、またはサービスに関するお問い合わせについては、KEFの公式ウェブサイトをご覧ください。 website or contact your authorized KEF dealer.

You can also visit the KEF Store on Amazon for more information and products: KEF Amazon Store