Seesii ミニチェーンソー 6インチ コードレス電動チェーンソー 取扱説明書

1. 重要な安全上の注意事項

この電動工具に付属のすべての安全上の警告、指示、図、および仕様をお読みください。 下記の指示に従わないと、感電、火災、重傷を負う可能性があります。 後で参照できるように、すべての警告と指示を保存してください。

1.1 個人用保護具（PPE）

• 飛散する破片から目を保護するために、必ず安全メガネまたはゴーグルを着用してください。
• Wear heavy-duty work gloves to protect hands.
• Wear non-slip, sturdy footwear to maintain balance and footing.
• Consider wearing hearing protection during extended use.

1.2 電気およびバッテリーの安全性

• 不意の始動を防ぎます。 バッテリーパックに接続する前、ツールを持ち上げたり運んだりする前に、スイッチがオフの位置にあることを確認してください。
• 調整、アクセサリの交換、または電動工具の保管を行う前に、バッテリー パックを工具から取り外してください。
• 充電は製造元が指定した充電器のみを使用してください。あるタイプのバッテリー パックに適した充電器を別のバッテリー パックに使用すると、火災の危険が生じる可能性があります。
• Do not use battery packs or tools that are damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• バッテリー パックまたはツールを火や高温にさらさないでください。火や 130°C (265°F) を超える高温にさらすと爆発する可能性があります。

1.3作業エリアの安全性

• 作業エリアを清潔に保ち、明るくしてください。雑然とした場所や暗い場所は事故を招きます。
• 可燃性の液体、ガス、粉塵などが存在する爆発性雰囲気内で電動工具を操作しないでください。
• 電動工具を操作するときは、子供や傍観者を近づけないでください。注意散漫になると制御不能になる可能性があります。

1.4 チェーンソー特有の安全性

• Keep all parts of the body away from the saw chain when the chainsaw is operating. Ensure the chainsaw is switched off before attempting to clear jammed material or servicing the unit.
• Always hold the chainsaw with both hands when the motor is running.
• 木の中でチェーンソーを操作しないでください。 木の上でチェーンソーを操作すると、怪我をする可能性があります。
• Maintain proper footing and operate the chainsaw only when standing on a fixed, secure, and level surface. Slippery or unstable surfaces may cause a loss of balance or control of the chainsaw.
• Be aware of kickback. Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Kickback can cause an uncontrolled reaction, which may result in serious injury.
• チェーンソーを無人のまま作動させないでください。
• チェーンソーを濡れた状態や雨の中で使用しないでください。
• Ensure the automatic oiler system is functioning and filled with appropriate bar oil before and during use.

2.製品オーバーview およびコンポーネント

The Seesii Mini Chainsaw is a compact, battery-powered tool designed for light to medium cutting tasks such as pruning branches and cutting small logs. Familiarize yourself with its components before operation.

Image: Complete Seesii Mini Chainsaw kit, showing the main unit, two 21V batteries, a charger, two saw chains, a protective guard, safety glasses, work gloves, a small oil bottle, and a carrying case.

2.1 パッケージ内容

• 1×Seesii 6インチミニチェーンソーユニット
• 21V 2000mAh リチウムイオン電池 2個
• 1 xバッテリー充電器
• ソーチェーン 2 本 (1 本は取り付け済み)
• 1 x Guide Bar Guard Cover
• 作業用手袋1組
• 安全メガネ1組
• 1 x Oil Dispenser Bottle (bar oil not included)
• ドライバー x 1
• キャリングケース x 1
• ユーザーマニュアル (本書) x 1

3. セットアップと組み立て

3.1 バッテリーの充電

Ensure batteries are fully charged before first use for optimal performance and battery longevity.

画像: 詳細 view of the 21V 2000mAh lithium-ion battery pack, highlighting its internal structure and safety certifications.

1. 充電器を標準の電源コンセントに接続します。
2. Insert the battery pack into the charger. The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged).
3. A full charge typically takes 2-3 hours. The batteries are designed with overload and temperature protection.
4. 完全に充電されたら、バッテリーを充電器から取り外します。

3.2 チェーンとガイドバーの取り付け

WARNING: Always remove the battery before performing any assembly, adjustment, or maintenance to prevent accidental starting and potential injury.

1. チェーンソーからバッテリーが取り外されていることを確認してください。
2. Loosen the guide bar retaining nut (if present) and remove the side cover.
3. Carefully place the saw chain around the sprocket and guide bar, ensuring the cutting edges of the chain teeth are facing in the correct direction (refer to markings on the guide bar or chain).
4. Fit the guide bar onto the chainsaw studs, ensuring the chain is properly seated in the guide bar groove.
5. サイドカバーを元に戻し、固定ナットを手で締めます。
6. Adjust chain tension: The chain should be snug against the guide bar but still able to be pulled freely by hand. There should be no more than 2-3mm of slack when pulled up from the center of the guide bar. Use the provided screwdriver to adjust the tension screw if necessary.
7. Once tension is correct, fully tighten the guide bar retaining nut.

3.3 Filling Bar Oil

The chainsaw features an automatic oiler system. It is crucial to keep the oil tank filled with appropriate bar and chain oil to ensure smooth operation and extend the life of the chain and guide bar. Bar oil is not included in the package.

画像: 詳細 view of the chainsaw's automatic oiler system, indicating the oil tank, oiler button, and oil inspection window for monitoring oil levels.

1. チェーンソーの電源がオフになっており、バッテリーが取り外されていることを確認します。
2. Locate the oil tank cap (often marked with an oil symbol) and unscrew it.
3. Fill the oil dispenser bottle with approximately 30ml (1/8 cup) of standard bar and chain oil.
4. Carefully pour the bar oil into the oil tank. Avoid overfilling.
5. オイルタンクキャップをしっかりと閉めてください。
6. Check the oil level periodically using the oil inspection window during operation.

4. 操作

4.1 チェーンソーの始動と停止

The chainsaw is equipped with a dual safety lock mechanism to prevent accidental starts.

Image: Component breakdown showing the pure copper motor, the 6-inch guide bar and chain, the safety button on the handle, and the automatic oiler mechanism.

1. Insert a fully charged battery into the chainsaw until it clicks into place.
2. To start: Press and hold the safety lock button (usually located on the side of the handle). While holding the safety lock, squeeze the trigger switch. The saw chain will begin to move.
3. To stop: Release the trigger switch. The saw chain will stop immediately.

4.2 切断技術

Always maintain a firm grip with both hands and ensure stable footing. The chainsaw is designed for cutting logs and branches up to 6 inches in diameter.

Image: A user demonstrating the Seesii mini chainsaw cutting a 6-inch diameter log, illustrating its cutting capacity and efficiency.

• 切る前： Inspect the material to be cut for nails, wire, or other foreign objects. Clear the work area of any obstructions.
• 正しいグリップ: Hold the chainsaw firmly with both hands, one on the main handle and one on the auxiliary handle, ensuring your thumbs wrap around the handles.
• カットの開始: Place the running chain against the material to be cut. Allow the chain to reach full speed before engaging the wood.
• 切断アクション: Apply light, steady pressure. Let the saw do the work. Do not force the saw through the cut.
• キックバックを避ける: Be mindful of the guide bar tip. Avoid contact with any object, especially when starting a cut or cutting through knots.
• 給油頻度: For optimal performance and chain life, press the manual oiler button every 10-15 cuts to ensure adequate lubrication.
• カットの仕上げ: Support the material to prevent it from pinching the chain. If cutting a branch under tension, make an undercut first to prevent splitting.

5. メンテナンスとケア

WARNING: Always remove the battery from the chainsaw before performing any inspection, cleaning, or maintenance procedures.

5.1 Chain Sharpening and Tension Adjustment

• チェーン研磨: A dull chain will reduce cutting efficiency and increase kickback risk. Sharpen the chain regularly or replace it when necessary. Refer to a chainsaw sharpening guide for proper technique or consult a professional.
• チェーン張力: Check chain tension frequently, especially during the first few hours of use. A new chain may stretch. Adjust tension as described in Section 3.2. An overly loose chain can derail, while an overly tight chain can cause premature wear and overheating.

5.2 清掃と保管

• クリーニング： After each use, clean the chainsaw thoroughly. Remove sawdust, wood chips, and debris from the guide bar, chain, and motor housing. Use a brush or compressed air. Do not use water directly on electrical components.
• ガイドバー： Periodically clean the guide bar groove to ensure proper chain lubrication and movement.
• ストレージ： Store the chainsaw in its carrying case in a dry, secure location, out of reach of children. Ensure the guide bar guard is in place. Remove the battery before storing for extended periods.

5.3バッテリーケア

• 電池は直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• Do not store batteries in a discharged state. Recharge them periodically if not used for a long time.
• バッテリー端子をショートさせないでください。

6。 トラブルシューティング

This section addresses common issues you might encounter with your Seesii Mini Chainsaw.

7. 技術仕様

Key technical details for the Seesii Mini Chainsaw Model 636022.

8. 保証と顧客サポート

Seesii is committed to providing quality products and customer satisfaction. While specific warranty details may vary, we offer dedicated customer support to assist you with any questions or concerns regarding your mini chainsaw.

• For technical assistance, troubleshooting, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Seesii webサイト。
• Our customer support team strives to respond to inquiries promptly.