1. はじめに
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Bromic Affinity Smart Heat Dimmer Controller, Model BH3130062. This 2-channel controller is designed to manage Bromic Platinum and Tungsten electric heaters, offering precise heat output adjustments and smart connectivity via Wi-Fi and Bluetooth.
Please read this manual thoroughly before installation and use, and retain it for future reference. Proper installation and adherence to these instructions are crucial for optimal performance and safety.
図1: 前面 view of the Bromic Affinity Smart Heat Dimmer Controller.
2. 安全情報
警告： これらの安全指示に従わないと、火災、感電、またはその他の怪我や損傷を引き起こす可能性があります。
- Installation must be performed by a qualified and licensed electrician in accordance with all local and national electrical codes.
- Disconnect power at the circuit breaker before installing or servicing the controller.
- コントローラーが破損していると思われる場合は操作しないでください。
- Ensure the power supply matches the specifications of the controller (208-277V).
- This device is designed for outdoor use with an IP54 rating, but avoid direct water spray or submersion.
- 設置および操作中は、子供やペットを設置エリアから遠ざけてください。
- Do not attempt to modify or repair the controller yourself. Contact qualified service personnel.
3 製品の特徴
The Bromic Affinity Smart Heat Dimmer Controller offers advanced functionality for managing your electric heating system:
- 高電力容量: Supports up to 12,000 watts (6kW per channel) at 208–277 volts two-phase.
- Electric Heater Compatibility: Designed for seamless integration with Bromic Platinum and Tungsten Series electric heaters.
- スマート接続: Integrated Wi-Fi (2.4GHz) and Bluetooth for remote control via the Bromic Heating App.
- アプリコントロール: Manage heaters, adjust settings, create zones, set timers, and enable multi-site control from your smartphone.
- 音声の統合: Compatible with Amazon Alexa and Google Home for convenient voice control.
- 正確な調光： Fine-tune heat output with adjustments down to 1% increments.
- 耐久性に優れたデザイン: IP54 weather-resistant rating for outdoor use, operating in temperatures from -4°F to 86°F.
- Optional Expansion: Supports an optional Expansion Board for Ethernet connectivity and 0–10V compatibility for smart home integration.
4. インストールとセットアップ
重要： Installation must be performed by a qualified and licensed electrician.
4.1コントローラーの取り付け
- Choose a suitable outdoor location that is protected from direct heavy rain and sunlight, yet accessible for wiring and maintenance.
- Ensure the mounting surface is stable and can support the weight of the controller.
- Mount the controller securely using appropriate fasteners. Refer to the included mounting template for hole placement.
図2：例ample of the controller mounted on an exterior wall with conduit connections.
4.2電気配線
- Ensure all power is disconnected at the main circuit breaker before beginning any wiring.
- Connect the incoming power supply (208-277V, two-phase) to the designated terminals within the controller.
- Connect the Bromic electric heaters to the output channels of the controller. This 2-channel model supports two independent heater circuits.
- Follow the wiring diagram provided in the full installation guide (not included in this manual) for precise connections.
- Ensure all connections are tight and secure, and that proper grounding is established.
- Close and seal the enclosure securely after wiring to maintain its IP54 rating.
4.3 アプリとネットワークの設定
- ダウンロード Bromic 暖房アプリ デバイスのアプリ ストア (iOS または Android) から。
- アカウントを作成するか、ログインしてください。
- Follow the in-app instructions to add your new Affinity Smart Heat Dimmer Controller. This typically involves connecting to the controller's temporary Bluetooth network or Wi-Fi hotspot, then configuring it to join your home/business 2.4GHz Wi-Fi network.
- Once connected, you can name your controller and assign heaters to specific zones.
5. 操作手順
The Bromic Affinity Controller is primarily operated through the Bromic Heating App.
5.1 Basic On/Off and Dimming
- Open the Bromic Heating App on your smartphone or tablet.
- Select the desired controller or zone.
- タップして オン/オフ button to power the connected heaters.
- スライダーまたはパーセントを使用するtage input to adjust the heat output from 1% to 100%.
5.2 高度なアプリ機能
- ゾーンの作成: Group multiple heaters or channels into custom zones for simultaneous control.
- タイマー: Schedule specific on/off times and heat levels for different zones or individual heaters.
- Multi-Site Control: Manage multiple Bromic Affinity controllers located at different properties from a single app.
- 音声コントロール: Integrate with Amazon Alexa or Google Home by linking your Bromic Heating account in their respective apps. Use commands like "Alexa, turn on patio heater" or "Hey Google, set lounge heat to 75%."
6. メンテナンス
The Bromic Affinity Smart Heat Dimmer Controller requires minimal maintenance to ensure long-term performance.
- クリーニング： コントローラーの外側を定期的に柔らかくて乾いた布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。清掃する前に必ず電源を切ってください。
- 検査： Annually inspect the wiring connections and the enclosure for any signs of wear, damage, or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- ファームウェアの更新： The Bromic Heating App will notify you of any available firmware updates for your controller. It is recommended to install these updates to ensure optimal performance and access to new features.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| コントローラーの電源が入りません。 | 電源が供給されていない、回路ブレーカーが落ちている、配線に問題がある。 | Check circuit breaker. Verify power connections. Contact electrician if problem persists. |
| Heaters not responding. | Heaters not connected; controller not powered; app issue; heater fault. | Ensure heaters are properly wired. Check controller power. Restart app. Consult heater manual. |
| Wi-Fi/Bluetoothに接続できません。 | Incorrect Wi-Fi password; out of range; 2.4GHz network not used; interference. | Verify Wi-Fi password. Move closer to controller/router. Ensure 2.4GHz network is selected. Reduce interference. |
| Dimming not working correctly. | Heater incompatibility; wiring issue; controller fault. | Ensure heaters are compatible Bromic models. Check wiring. Contact support. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Bromic Heating customer support.
8. 仕様
| モデル番号 | BH3130062 |
| ブランド | 臭素加熱 |
| チャンネル | 2 |
| 電力容量 | 12,000W (6kW per channel) |
| 巻tage | 208-277V (Two-Phase) |
| 接続性 | Wi-Fi（2.4GHz）、Bluetooth |
| エンクロージャ定格 | IP54（耐候性） |
| 動作温度 | -4°F ～ 86°F (-20°C ～ 30°C) |
| 製品寸法（長さ x 幅 x 高さ） | 11.4インチ x 8インチ x 6.4インチ |
| アイテム重量 | 5.3 ポンド |
| 色 | Metal (Gray Finish) |
9. 保証とサポート
9.1 保証情報
This Bromic Affinity Smart Heat Dimmer Controller (Model BH3130062) comes with a 1年間のメーカー保証 ご購入日から1年間有効です。本保証は、通常の使用における材料および製造上の欠陥を対象とします。不適切な取り付け、誤用、乱用、事故、または無許可の修理に起因する損傷は保証の対象外となります。
保証請求のために購入証明書を保管してください。
9.2 カスタマーサポート
For technical assistance, troubleshooting, or warranty inquiries, please contact Bromic Heating customer support. Refer to the Bromic Heating web最新の連絡先情報については、サイトをご覧ください。
オンラインリソース: Visit the official Bromic Heating website for FAQs, additional documentation, and support resources.