BenQ EX271Q

BenQ MOBIUZ EX271Q ゲーミングモニター ユーザーマニュアル

Model: EX271Q

1. はじめに

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your BenQ MOBIUZ EX271Q 27-inch 2K 180Hz Gaming Monitor. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your gaming and viewing の経験。

フロント view of the BenQ MOBIUZ EX271Q gaming monitor with a space-themed wallpaper.

Figure 1: BenQ MOBIUZ EX271Q Gaming Monitor (Front View)

2. 主な特徴

The BenQ MOBIUZ EX271Q monitor is designed to enhance your visual and gaming experience with advanced technologies:

  • AI Detail Enhancement: Optimizes image details for a vibrant and aesthetically pleasing ディスプレイ。
  • Gamer-Experienced Color (PixSoul Engine): A revolutionary color technology that redefines color presentation for gaming.
  • KVM 機能: Seamlessly switch between multiple connected devices (e.g., PC, laptop) using a single keyboard and mouse.
  • カラーシャトル: Provides various authorized presets for popular games to optimize visual delicacy.
  • Eye-Care Technology and Ergonomics: Features designed to reduce eye strain and provide comfort during extended use.

3.セットアップガイド

3.1 パッケージ内容

組み立てる前に、すべてのコンポーネントが揃っていることを確認してください。

  • BenQ MOBIUZ EX271Q Monitor Panel
  • モニタースタンド(ベースとネック)
  • 電源ケーブル
  • HDMIケーブル
  • USB-Cケーブル
  • リモートコントローラー

3.2 モニタースタンドの組み立て

  1. 傷がつかないように、モニターパネルを表面を下にして柔らかく清潔な表面に置きます。
  2. スタンドネックをモニターパネルの背面に取り付けます。カチッと音がしてしっかりと固定されていることを確認してください。
  3. スタンドベースをスタンドネックの底部に取り付けます。ベースの固定ネジを締めて固定します。
後方 view of the BenQ MOBIUZ EX271Q monitor showing the stand attachment point and various input ports.

Figure 2: Rear Panel with Stand Attachment and Ports

3.3 モニターの接続

適切なケーブルを使用して、モニターをコンピューターまたはその他のデバイスに接続します。

  • 電源接続: 電源ケーブルをモニターの電源入力に接続し、次に電源コンセントに接続します。
  • ビデオ入力:
    • For optimal performance, use the DisplayPort (DP 1.4) cable to connect to your graphics card.
    • Alternatively, use an HDMI (HDMI 2.0) cable for compatible devices.
    • For USB-C compatible devices, use the USB-C cable (65W Power Delivery supported).
  • USBハブ: Connect the USB-C cable to enable the monitor's built-in USB hub for peripherals.
Diagram showing a laptop connected to the BenQ MOBIUZ EX271Q monitor via USB-C, with a keyboard and mouse connected to the monitor, illustrating KVM functionality.

Figure 3: KVM Setup with USB-C, HDMI, and DisplayPort Connections

4. 操作手順

4.1 電源オン/オフ

Press the power button located on the monitor or use the remote controller to turn the monitor on or off.

4.2 オンスクリーンディスプレイ(OSD)メニュー

The OSD menu allows you to adjust various monitor settings. Access it using the joystick on the monitor or the dedicated buttons on the remote controller.

主要な OSD 設定:

  • 写真: 明るさ、コントラスト、シャープネス、ガンマ、色温度。
  • カラーモード: Standard, FPS, RPG, Racing, sRGB, HDR, User Defined.
  • 入力: Select between DisplayPort, HDMI, or USB-C inputs.
  • オーディオ: 内蔵スピーカーまたはヘッドフォン出力の音量コントロール。
  • アイケア: Adjust settings for Low Blue Light and Brightness Intelligence Plus.

4.3 KVMスイッチの機能

The KVM (Keyboard, Video, Mouse) switch allows you to control multiple devices connected to the monitor with a single set of keyboard and mouse. Connect your keyboard and mouse to the USB ports on the monitor. When you switch video input sources (e.g., from PC via DisplayPort to laptop via USB-C), the keyboard and mouse will automatically switch to control the selected device.

Note: KVM switching times may vary depending on the connected devices and USB standards (e.g., 6 seconds for USB-C laptop, 8 seconds for USB 2.0 desktop).

4.4リモコン

The included remote controller provides convenient access to OSD settings, input switching, and volume control without needing to reach the monitor's physical buttons.

5. メンテナンス

5.1 モニターの掃除

モニター画面を清掃するにはasing:

  • 清掃する前に必ずモニターの電源をオフにし、電源コードを抜いてください。
  • 柔らかく糸くずの出ない布を軽く拭いてください。amp水または、研磨剤を含まない低刺激のスクリーンクリーナーで拭いてください。
  • クリーナーを画面に直接スプレーしないでください。
  • 強い化学薬品、溶剤、研磨剤の使用は避けてください。画面やコンピュータに損傷を与える可能性があります。asing.

6。 トラブルシューティング

モニターに問題が発生した場合は、次の一般的な解決策を参照してください。

問題考えられる解決策
画面に画像がありません
  • 電源ケーブルが確実に接続され、電源コンセントがアクティブになっていることを確認します。
  • Verify video input cable (DP, HDMI, USB-C) is properly connected to both monitor and source device.
  • Select the correct input source via the OSD menu or remote.
  • Check if the source device (PC, console) is powered on and outputting video.
画像がぼやけたり歪んだりする
  • Adjust resolution and refresh rate settings on your source device to match monitor specifications (2560x1440, 180Hz).
  • ビデオ ケーブルに損傷や接続の緩みがないか確認してください。
  • OSD を工場出荷時の設定にリセットします。
KVMスイッチが動作しない
  • Ensure the USB-C cable is connected from the monitor to the source device for USB data transfer.
  • Verify keyboard and mouse are connected to the monitor's USB hub ports.
  • Allow a few seconds for the switch to complete after changing video input.
音声なし
  • Increase monitor volume via OSD or remote.
  • ソースデバイスのオーディオ出力設定を確認してください。
  • Ensure headphones or external speakers are properly connected if used.

7. 仕様

Detailed technical specifications for the BenQ MOBIUZ EX271Q monitor:

特徴詳細
ブランドベンキュー
モデル番号EX271Q
画面サイズ27インチ
解決QHDワイド1440p(2560 x 1440ピクセル)
リフレッシュレート180 Hz (via DisplayPort) / 165 Hz (general)
応答時間1ミリ秒(GtG)
表示タイプLED IPS
アスペクト比16:9
輝度350ニット
コントラスト比400:1(ネイティブ)
色域95% DCI-P3
View角度178度
接続性1x DisplayPort 1.4, 2x HDMI 2.0, 1x USB-C (65W PD), USB Hub
アダプティブ同期AMD フリーシンク プレミアム
特集Eye Care, KVM, DisplayHDR 400, Pixsoul Engine, Remote Controller
商品の寸法(奥行きx幅x高さ)奥行き32インチ x 幅18.89インチ x 高さ7.4インチ
アイテム重量23.4 ポンド

8. 保証とサポート

8.1 保証情報

The BenQ MOBIUZ EX271Q monitor comes with a 2年間のメーカー保証この保証は、通常の使用状況における材料および製造上の欠陥を対象としています。保証請求の際は、購入証明書を保管してください。

8.2 カスタマーサポート

For technical assistance, warranty service, or additional product information, please visit the official BenQ support website or contact their customer service department. Contact details can typically be found on the BenQ webサイトまたは製品のパッケージ内。

© 2026 BenQ Corporation. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.