GIANDEL 4000W 純正正弦波パワーインバーター（モデル GS-4000KAR-GFCI）取扱説明書

1. はじめに

This manual provides essential information for the safe and efficient operation of your GIANDEL 4000W Pure Sine Wave Power Inverter. This advanced inverter converts 12V DC battery power to 110V-120V AC household electricity, featuring a continuous output of 4000 watts and a surge capability of 7000 watts for 2 seconds. It is designed for a wide range of applications, including RVs, vessels, and off-grid solar systems, powering sensitive equipment like water pumps, air conditioners, hair dryers, microwaves, and air compressors.

2. 重要な安全情報

設置および操作の前に、すべての安全に関する指示をよくお読みください。これらの指示に従わないと、感電、火災、または重傷を負う可能性があります。

• 電気安全: The inverter is equipped with UL listed 20 Amps GFCI (Ground Fault Circuit Interrupter) outlets for protection against ground faults. Ensure all connections are secure and properly grounded.
• 換気： Always ensure adequate ventilation around the inverter to prevent overheating. The unit features high-speed ventilation fans for temperature regulation.
• バッテリー互換性: This inverter is compatible with all 12V batteries, including LiFePO4, Lead Acid, and Ternary lithium batteries. Ensure your battery system is correctly sized and configured for the inverter's power output.
• 保護機能: The inverter includes multiple electronic protections: under-voltageとover-voltage protection, over-temperature protection, over-load protection, and short circuit protection.
• ケーブルのサイズ: Use appropriately sized, all-insulated ring terminal cables for battery connections to prevent overheating and ensure efficient power transfer. Inadequate cable gauge can lead to voltage drop and reduced performance.
• インストール環境: インバーターは、可燃性物質や直射日光を避け、乾燥した換気の良い場所に設置してください。

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• GIANDEL 4000W Pure Sine Wave Power Inverter Unit
• バッテリーレベルモニター付き 30 フィート有線リモコン
• Wireless Remote Control (up to 20 meters range)
• All-Insulated Ring Terminal Cables (for battery connection)
• Shockproof Pads
• ユーザーマニュアル

4. 製品の特徴とその他view

The GIANDEL 4000W Pure Sine Wave Power Inverter is engineered for reliability and performance, offering a clean and stable power source.

• ハイパワー出力： Provides 4000W continuous power and 7000W surge power for 2 seconds, suitable for high startup power inductive loads.
• 純粋な正弦波: Delivers clean and smooth power, identical to utility grid power, making it safe for sensitive electronics.
• ユニバーサルバッテリー互換性: Works with various 12V battery types, including LiFePO4, Lead Acid, and Ternary lithium.
• Customizable Low Voltag保護: 低容量を入力tage protection value is resettable from 9.5V to 11.5V to match different battery chemistries.
• 包括的な表示: A large LCD screen shows input voltage、出力ボリュームtage, load power, frequency, battery status, and protection codes.
• デュアルリモコン: Includes a 30ft wired remote for convenient control and monitoring, plus a wireless remote for operation up to 20 meters away.
• 堅牢な構造: Features a durable aluminum alloy housing for superior heat dissipation and fire resistance, along with high-speed cooling fans.
• 高度な安全性: ULリステッド 20 Amps GFCI outlets provide ground fault protection. Main components like PCB, fuses, and transformers are UL listed.

5. セットアップとインストール

Proper installation is crucial for performance and safety.

1. インバータの取り付け: Choose a dry, cool, and well-ventilated location. The inverter can be mounted horizontally or vertically. Ensure sufficient clearance around the unit for airflow, especially around the cooling fans.
2. バッテリーへの接続:
   • Connect the supplied red positive (+) cable to the inverter's positive terminal and the battery's positive terminal.
   • Connect the supplied black negative (-) cable to the inverter's negative terminal and the battery's negative terminal.
   • Ensure all connections are tight and secure. Use the provided all-insulated ring terminal cables. For high loads, consider using thicker gauge cables if the provided ones are insufficient to prevent voltage落下と過熱。
3. 接地: Connect the inverter's ground terminal to a proper earth ground.
4. Connecting Remote Controls:
   • Plug the wired remote control cable into the designated 'Remote' port on the inverter.
   • The wireless remote control operates independently and does not require a physical connection to the inverter.

6. 操作手順

Follow these steps to operate your inverter:

1. 電源オン/オフ: Use the ON/OFF switch on the inverter or the remote control to power the unit. The LCD display will illuminate upon activation.
2. ディスプレイの監視: LCD 画面にはリアルタイムの情報が表示されます。
   • 入力ボリュームtage（VDC）
   • 出力巻tage（VAC）
   • 出力電力 (W)
   • 周波数 (Hz)
   • バッテリーステータスインジケーター
   • Protection Codes (e.g., OVERVOLTAGE, OVERLOAD, OVERHEAT)
3. Battery Type Selection (F3): This inverter allows you to select the battery type to optimize performance and protection. Refer to the detailed manual for specific steps to access and change this setting.
4. Adjusting Low Voltage Protection (F4): You can customize the input low voltage protection value between 9.5V and 11.5V. This is important for different battery types to prevent over-discharge. Consult the full manual for adjustment procedures.
5. AC機器の接続: Plug your 110V-120V AC appliances into the GFCI outlets on the inverter. Ensure the total wattag機器の定格電力がインバーターの連続電力定格 (4000W) を超えないようにしてください。

7. メンテナンス

Regular maintenance ensures longevity and optimal performance of your inverter.

• クリーニング： インバーターは清潔に保ち、ほこりやゴミが付かないようにしてください。表面は乾いた布で拭いてください。液体洗剤は使用しないでください。
• 換気： Periodically check that the cooling fans and ventilation openings are not obstructed.
• 接続: Regularly inspect all electrical connections (battery terminals, AC outlets, ground wire) for tightness and corrosion. Tighten any loose connections.
• ストレージ： インバータを長期間保管する場合は、バッテリーから取り外し、涼しく乾燥した場所に保管してください。

8。 トラブルシューティング

問題が発生した場合は、次の一般的なトラブルシューティングのヒントを参照してください。

• インバータがオンにならない: Check battery connections for tightness and proper polarity. Ensure the battery voltage is within the operating range (12V). Verify the ON/OFF switch is in the 'ON' position.
• AC出力なし: Check if the inverter is in a protection mode (e.g., overload, low voltage). Reduce the load if overloaded. Ensure the appliance is functioning correctly.
• 過負荷保護: If the inverter shuts down due to overload, disconnect some appliances and restart the inverter. The 7000W surge capacity is for 2 seconds; sustained loads above 4000W will trigger protection.
• 低ボリュームtage/High Voltag保護: If the inverter displays a voltage protection code, check your battery voltage. Recharge or replace batteries if necessary. Ensure the input voltageは安定しています。
• 過熱保護: If the inverter overheats, ensure adequate ventilation and that cooling fans are operating. Reduce the load if operating in high ambient temperatures.
• Inaccurate LCD Voltage読書： Some users have reported minor discrepancies (e.g., 0.3V) between the inverter's LCD display and external multimeter readings. While the inverter's core function remains, be aware of this potential for slight variation in display accuracy.

9. 仕様

10. 保証とサポート

GIANDEL is committed to customer satisfaction.

• 保証： この製品には 18 か月の手間いらずの保証が付いています。
• 顧客サービス： Online support and service phone are available to provide friendly customer service and ensure 100% customer satisfaction.
• サービスセンター： アフターサービスのため、IL、TN、TX に 3 つのサービス センターがあります。