1.製品オーバーview
The Audio Array AM-W20 is a magnetic wireless lapel microphone set designed for high-fidelity audio recording. It features one-touch smart noise reduction, 48KHz/24Bit Hi-fi recording capabilities, a 50-meter wireless range, and an 800mAh battery providing up to 48 hours of operation with the charging case. This microphone is suitable for various applications including vlogging, podcasting, and streaming.
Image: The Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set, including the transmitter, receiver, and charging case.
主な特徴:
- 高忠実度録音: 48kHz/24bit audio capture with a 70dB signal-to-noise ratio.
- スマートノイズリダクション: One-touch activation for clear voice recordings in noisy environments.
- 拡張ワイヤレス範囲: Up to 50 meters (164 feet) of uninterrupted working range.
- 長いバッテリー寿命: 1 回の充電で最大 4 時間、充電ケースを使用すると最大 48 時間使用できます。
- ユニバーサル互換性： Supports iOS (with Type-C to Lightning adapter) and Android devices (Type-C/USB-C ports) with OTG support.
- Magnetic Clip Design: Allows for versatile and secure positioning.
Image: Visual representation of the AM-W20's key features, including compatibility, magnetic clip, wireless technology, audio quality, range, battery life, and noise cancellation.
2. セットアップ手順
2.1 初期ペアリングと接続
The Audio Array AM-W20 system is pre-paired at the factory for immediate use. No manual pairing is required for initial setup.
- デバイスを充電する: Ensure both the transmitter (TX) and receiver (RX) are fully charged using the provided charging case.
- 受信機を接続します。 Plug the receiver (RX) into the Type-C or USB-C port of your recording device (smartphone, tablet, etc.). For iOS devices, use the included Type-C to Lightning adapter.
- 送信機の電源オン: Take the transmitter (TX) out of the charging case. It will automatically power on and connect to the receiver.
- 接続を確認します: A solid indicator light on both the transmitter and receiver typically signifies a successful connection.
Image: Visual guide demonstrating the three-step plug-and-play connection process: 1. Plug in the receiver, 2. Turn on the transmitter, 3. Devices are connected.
2.2 Device Compatibility and OTG Function
The AM-W20 is compatible with a wide range of devices, including iPhones, iPads, and Android smartphones/tablets with Type-C or USB-C ports. OTG (On-The-Go) support is essential for Android devices.
- iOS デバイス: Use the provided Type-C to Lightning adapter.
- Android デバイス: Ensure your device supports OTG. Some Android smartphones require you to manually enable the OTG function in their settings for external microphones to work correctly.
Image: Illustration of the AM-W20's broad compatibility with various mobile devices and applications.
Image: Guide for Android users on enabling OTG and configuring the 'Open Camera' app for external microphone use.
3. 操作手順
3.1 電源オン/オフ
The transmitter (TX) automatically powers on when removed from the charging case. To manually power on or off, press and hold the power button on the transmitter.
3.2 Noise Cancellation (ANC Mode)
The AM-W20 features a smart noise reduction function to minimize background interference.
- アクティベーション: Press the yellow button on the transmitter once to activate noise cancellation. A green indicator light will illuminate on the transmitter.
- 非アクティブ化： Press the yellow button again to deactivate noise cancellation.
- 自動アクティベーション： Noise cancellation is active automatically when the transmitter is turned on.
Image: The AM-W20 transmitter highlighting the yellow button for one-tap noise cancellation.
3.3 ミュート機能
To temporarily mute the microphone during recording:
- 有効化/無効化: Double-tap the power button on the transmitter.
Image: Explanation of Audio Modes, showing single tap for ANC and double tap for Mute.
3.4 マイクの配置
The AM-W20 features a magnetic clip for flexible and secure attachment.
- 磁気アタッチメント: Use the magnetic clip to attach the microphone to clothing or other surfaces.
- 最適な配置: For best audio quality, position the microphone approximately 6-8 inches (15-20 cm) below your mouth, centered on your chest. Avoid placing it directly under your chin or too close to your mouth to prevent plosives and distortion.
Image: Demonstrates various ways to wear the microphone, including magnetic attachment, necklace style, and traditional clip.
4. メンテナンス
4.1 Charging the Microphone Set
The AM-W20 microphone set is powered by an internal rechargeable battery. The charging case provides extended battery life.
- 送信機の電池寿命: 4回の充電で最大XNUMX時間使用可能。
- ケース付きバッテリー総寿命: 最大48時間。
- 充電： Place the transmitter and receiver into the charging case. Connect the charging case to a power source using a standard USB-C cable. The indicator lights on the case will show the charging status.
Image: Visual display of the AM-W20's battery performance, indicating 4 hours of use per charge and 48 hours with the charging case.
4.2 清掃と保管
- クリーニング： Use a soft, dry cloth to clean the microphone and charging case. Avoid using liquids or abrasive cleaners.
- ストレージ： Store the microphone set in its charging case in a cool, dry place away from direct sunlight and extreme temperatures.
5。 トラブルシューティング
If you encounter issues with your Audio Array AM-W20, refer to the following common troubleshooting steps:
- Microphone Disconnects:
- レシーバーがデバイスにしっかりと接続されていることを確認してください。
- Check the battery level of both the transmitter and receiver.
- Verify that there are no significant obstacles or sources of interference within the 50-meter range.
- For Android devices, confirm that the OTG function is enabled in your phone's settings.
- Poor Audio Quality / Disturbance / Shrieking Sound:
- ノイズキャンセル： Ensure noise cancellation is activated (green light on TX). If recording in extremely noisy environments, some residual noise may still be present.
- マイクの配置: Avoid placing the microphone too close to your mouth or directly under your chin. Optimal placement is typically 6-8 inches below the mouth.
- 録音音量: If experiencing a shrieking sound, the input volume might be too high. Adjust the recording volume settings on your device if possible.
- 干渉： 干渉を引き起こす可能性のある他のワイヤレス デバイスや強力な電磁場から離れてください。
- 充電の問題:
- Ensure the USB-C charging cable is fully inserted into both the charging case and the power adapter.
- アクセサリの不具合を排除するために、別の USB-C ケーブルと電源アダプターを試してください。
- Check for any debris in the charging ports of the case or devices.
- No Sound Recording (Android):
- Enable OTG in your phone's settings.
- Use a third-party camera app like 'Open Camera' and ensure 'External mic' is selected as the audio source in its settings.
6. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル番号 | AM-W20 |
| 特集 | 無線 |
| 対応デバイス | スマートフォン、タブレット（iOS、Android） |
| 色 | 黒 |
| 含まれるコンポーネント | Microphone (Transmitter), Receiver, Charging Case |
| 極性パターン | 一方向 |
| アイテム重量 | 170グラム（0.17キログラム） |
| インピーダンス | 600オーム |
| マイクフォームファクター | ラベリア |
| アイテムの寸法（LxWxH） | 13.5 x 10.5 x 5 センチメートル |
| 電源 | 電池駆動 |
| チャンネル数 | 1 |
| 接続技術 | USB |
| コネクタタイプ | USBタイプC |
| Sampルレート | 48kHz |
| ビット深度 | 24ビット |
| 信号対雑音比 | 70デシベル |
| 最大音圧レベル (SPL) | 115 dB SPL |
| ワイヤレス範囲 | 障害物がなければ最大50メートル（164フィート） |
| 送信機のバッテリー寿命 | 4時間（1回の充電） |
| バッテリー総寿命 | 48時間（充電ケース使用時） |
7. 保証とサポート
For product support, technical assistance, or warranty inquiries, please contact Audio Array customer service using the information below:
- 電話： +91 9372146440
- メールアドレス: support@audioarray.in
Image: Audio Array customer support details, including phone number and email for assistance.
保証請求のために購入証明書を保管してください。