LTS LXIP9C82W-28MDA Pro-Xシリーズ 8MP 4K バレットIPカメラ ユーザーマニュアル

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of the LTS LXIP9C82W-28MDA Pro-X Series 8MP 4K Bullet IP Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

The LTS Pro-X Series camera is designed for advanced surveillance, offering high-resolution imaging and intelligent features for both indoor and outdoor environments.

主な特徴:

• Resolutions up to 8 MP (3840 × 2160) @ 30 fps for clear, detailed video.
• Fixed 2.8 mm lens with 4 warm light LED illuminators providing 24/7 color imaging up to 197 feet.
• Advanced Smart H.264 / H.265 compression for efficient storage.
• 1/1.8" Progressive Scan CMOS sensor for high-quality image capture.
• Motion Detection 2.0 with focus on human and vehicle detection.
• リアルタイムの音声セキュリティを実現する内蔵マイク。
• MicroSD storage support up to 256 GB.
• IP67 weather resistance for outdoor use.
• Powered by PoE (IEEE 802.3af) or 12VDC.
• NDAA compliant for secure applications.

2. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• LTS LXIP9C82W-28MDA Pro-X Series 8MP 4K Bullet IP Camera
• 取り付け金具（ネジ、アンカー）
• クイックスタートガイド（該当する場合）

図1: 前面と側面 view of the LTS LXIP9C82W-28MDA Pro-X Series 8MP 4K Bullet IP Camera, showing its white casing, black lens housing, and mounting bracket.

3. セットアップとインストール

3.1取り付け位置

The camera is suitable for both indoor and outdoor use, with an IP67 rating for weather resistance. It is designed for ceiling mount installation. Choose a location that provides the desired field of view ネットワーク ケーブルの届く範囲内にあります。

3.2物理的な設置

1. 表面を準備する: Ensure the mounting surface is strong enough to support the camera's weight (approximately 3.5 pounds) and dimensions (11.53 x 3.73 x 3.35 inches).
2. ドリル穴をマークする: Use the camera's mounting base as a template to mark the positions for drilling holes.
3. ドリル穴: Drill pilot holes according to the marked positions. Insert wall anchors if mounting on drywall or masonry.
4. カメラを固定する: 付属のネジを使用して、カメラの取り付けベースを表面に取り付けます。
5. 角度の調整： 調整ネジを緩めてカメラを最適な位置に配置します viewing angle, then tighten them securely.

3.3 Connectivity and Wiring

The camera supports Power over Ethernet (PoE) (IEEE 802.3af) for simplified installation, allowing both power and data transmission over a single Ethernet cable. Alternatively, it can be powered by a 12V DC power supply (not included).

• PoE接続: Connect a standard Ethernet cable from a PoE-enabled switch or NVR to the camera's Ethernet port.
• 12V DC接続: If not using PoE, connect a 12V DC power adapter to the camera's power input and an Ethernet cable to the network.
• 互換性: This camera is part of the LTS Pro-X series and is NDAA compliant. For best compatibility and full functionality, pair it with an LTS Pro-X NVR. It is not plug & play compatible with LTS Platinum NVRs.
• プロトコル： The camera supports Ethernet, ONVIF, and RTSP connectivity protocols.

Figure 2: An image illustrating the correct wiring for the camera, highlighting a compatible network cable (PoE for video and power) on the left, and incompatible DC power and BNC video cables on the right, marked with a red cross.

4. 操作

4.1 Initial Power-Up and Network Configuration

Once connected to power and network, the camera will boot up. Access the camera's web interface or connect it to a compatible NVR for initial configuration, including setting up network parameters, user accounts, and video settings.

4.2 Video Surveillance Features

• 高解像度: The camera captures video at 8 MP (3840 x 2160) resolution at 30 frames per second, providing ultra-clear footage.
• 24/7 Color Imaging: Equipped with warm light LED illuminators, the camera delivers full-color video even in low-light conditions, up to 197 feet.
• モーション検出2.0: Configure motion detection zones and sensitivity. This advanced feature distinguishes between human and vehicle movement, reducing false alarms.
• オーディオモニタリング： The built-in microphone allows for real-time audio capture, enhancing security monitoring.
• ローカルストレージ: Insert a MicroSD card (up to 256 GB) into the camera's slot for local video recording. This can serve as a backup or primary storage solution.
• ワイドダイナミックレンジ(WDR): True WDR 130 dB technology ensures clear images in scenes with both very bright and very dark areas.
• X-Search: When paired with compatible NVR models (LTN94XX), the X-Search feature allows for efficient searching of recorded footage.

5. メンテナンス

5.1 クリーニング

• カメラのレンズとハウジングを定期的に柔らかくてきれいな布で拭いてください。amp cloth to remove dust, dirt, or smudges that may affect image quality.
• Avoid using harsh chemicals or abrasive materials that could damage the camera's finish or lens coating.

5.2ファームウェアアップデート

定期的にメーカーの webファームウェアのアップデートについては、こちらのサイトをご覧ください。カメラのファームウェアを最新の状態に保つことで、最適なパフォーマンス、セキュリティ、そして新機能へのアクセスを確保できます。

5.3 MicroSDカードの管理

If using a MicroSD card for local storage, ensure it is formatted correctly and periodically check its health. Replace the card if errors or degradation are detected.

6。 トラブルシューティング

6.1 ビデオフィードなし

• 電力を確認します: Ensure the camera is receiving power, either via PoE or a 12V DC adapter. Verify power indicator lights on PoE switch/injector.
• ネットワーク接続を確認します。 Confirm the Ethernet cable is securely connected at both ends and that network connectivity is active.
• NVR 互換性: If using an NVR, ensure it is an LTS Pro-X NVR. The camera is not compatible with LTS Platinum NVRs.
• IP アドレスの競合: Verify that the camera has a unique IP address on the network.

6.2 画像品質が悪い

• レンズをきれいにする: メンテナンス セクションの説明に従ってカメラ レンズをクリーニングします。
• 照明条件: Ensure adequate lighting. While the camera has 24/7 color, extreme low light or backlighting can affect quality. Utilize WDR settings if applicable.
• ネットワーク帯域幅: ネットワーク帯域幅が不十分な場合、動画が途切れたり画質が低下したりする可能性があります。ネットワーク負荷をご確認ください。
• 解像度設定: Verify that the camera's resolution settings are configured for 8 MP.

6.3 モーション検出が機能しない

• 構成： Check the motion detection settings in the camera's web interface or NVR. Ensure detection zones are correctly defined and sensitivity is appropriate.
• 録音スケジュール： Verify that the recording schedule is set to capture events triggered by motion.

7. 仕様

8. 保証とサポート

8.1 保証情報

Specific warranty terms and conditions for the LTS LXIP9C82W-28MDA Pro-X Series 8MP 4K Bullet IP Camera are provided by the manufacturer, LTS, or the authorized seller at the time of purchase. Please refer to your purchase documentation or contact the seller for detailed warranty information.

8.2 テクニカルサポート

For technical assistance, troubleshooting beyond this manual, or inquiries regarding product functionality, please contact the manufacturer (LTS) or your authorized product reseller. Have your model number (LXIP9C82W-28MDA) and purchase details ready when seeking support.