MAXTO MX2 Motorcycle Bluetooth Headset User Manual

1. はじめに

The MAXTO MX2 is a state-of-the-art motorcycle Bluetooth communication system designed to enhance your riding experience. It offers seamless connectivity for two riders up to 1000 meters, allowing for clear intercom communication. Key features include Hi-Fi stereo sound, music sharing capabilities, an integrated FM radio, and robust IPX6 waterproofing for reliable performance in various weather conditions. Equipped with Bluetooth 5.0 technology, the MX2 ensures stable connections and efficient power consumption. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your device.

The MX2 is engineered for durability and ease of use, featuring large buttons for glove-friendly operation and compatibility with both full-face and jet helmets. Its powerful 800mAh battery provides extended usage times, making it ideal for long rides.

2. パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

• MAXTO MX2 Bluetooth Headset Unit
• Headset Speakers (with integrated microphone)
• USB Type-C充電ケーブル
• Helmet Mounting Clip (Iron Clip)
• 接着マウント
• Microphone Sponge Covers
• ユーザーマニュアル

不足または破損した商品がある場合は、すぐにカスタマーサポートにご連絡ください。

3.製品オーバーview

The MAXTO MX2 unit features an intuitive design with easily accessible controls. Familiarize yourself with the buttons and ports before installation.

• 電源/インターコムボタン: Used for powering on/off, initiating/ending intercom calls.
• 音量アップボタン: Increases volume, navigates forward in menus.
• 音量ダウンボタン: Decreases volume, navigates backward in menus.
• 多機能ボタン（MFB）： Used for Bluetooth pairing, answering/ending calls, playing/pausing music, and activating voice assistant.
• 充電ポート: デバイスを充電するための USB Type-C ポート。
• ヘッドセットポート： スピーカーとマイクのアセンブリを接続します。

4. セットアップとインストール

4.1デバイスの充電

Before first use, fully charge the MX2 unit. Connect the provided USB Type-C cable to the charging port on the device and a compatible USB power source (e.g., computer USB port, wall adapter). The charging indicator light will show charging status. A full charge typically takes approximately 2 hours.

A fully charged battery provides up to 20 hours of continuous use and 200 hours of standby time.

4.2 ヘルメットの取り付け

The MX2 can be installed using either the iron clip mount or the adhesive mount, depending on your helmet type and preference. The iron clip is recommended for its durability and ease of transfer between helmets.

1. 取り付け場所を選択: Select a flat area on the left side of your helmet, near the bottom edge, where the unit will not obstruct your vision or movement.
2. マウントを取り付ける:
   • Iron Clip Mount: ヘルメットのシェルと内側のパッドの間にクリップを差し込みます。しっかりと固定されていることを確認してください。
   • 接着マウント: Clean the chosen area thoroughly. Peel off the protective film from the adhesive mount and firmly press it onto the helmet surface for at least 30 seconds. Allow the adhesive to cure for 24 hours before attaching the unit.
3. Attach MX2 Unit: Slide the MX2 unit onto the chosen mount until it clicks securely into place.
4. スピーカーの取り付け: Place the speakers inside the helmet's ear pockets. Ensure they are positioned directly over your ears for optimal sound quality. Use the provided hook-and-loop fasteners if necessary.
5. マイクのインストール:
   • Boom Microphone (for open-face/modular helmets): Attach the boom microphone to the inside of the helmet, positioning it close to your mouth.
   • Soft Wire Microphone (for full-face helmets): Route the soft wire microphone along the helmet's interior, positioning the microphone element near your mouth, typically within the chin bar area.
6. Connect Headset Cable: Plug the speaker and microphone cable into the headset port on the MX2 unit.

5. 操作手順

5.1 電源オン/オフ

• 電源オン: Press and hold the Power/Intercom Button for approximately 3 seconds until you hear an audible prompt and the indicator light illuminates.
• 電源を切る： Press and hold the Power/Intercom Button for approximately 3 seconds until you hear an audible prompt and the indicator light turns off.

5.2 Bluetooth Pairing with Mobile Devices

The MX2 uses Bluetooth 5.0 for stable and efficient wireless communication.

1. Ensure the MX2 unit is powered off.
2. Press and hold the MFB (Multi-function Button) for approximately 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
3. 携帯電話で Bluetooth を有効にして、新しいデバイスを検索します。
4. Select "MAXTO MX2" from the list of available devices.
5. Once paired, the indicator light will flash blue slowly, and you will hear a confirmation tone.

The MX2 supports universal pairing, allowing connection with various Bluetooth devices and intercoms from different brands, though compatibility may vary.

5.3 Intercom Function (2-Rider)

The MX2 allows for 2-rider intercom communication up to 1000 meters in open terrain.

1. Ensure both MX2 units are powered on and within range.
2. On one unit, short press the Power/Intercom Button to initiate an intercom connection.
3. The units will attempt to connect. Once connected, the indicator lights will change, and you will hear a confirmation tone.
4. To end an intercom call, short press the Power/Intercom Button again.

Note: The 1000m communication distance is an ideal range and may vary depending on surrounding obstacles, terrain, and radio wave environment.

5.4 音楽の再生と共有

Enjoy your favorite music with Hi-Fi stereo sound quality. The MX2 also supports music sharing between two connected units.

• 音楽の再生/一時停止: MFBを短く押します。
• 次のトラック: 音量アップボタンを長押しします。
• 前のトラック： 音量ダウンボタンを長押しします。
• 音楽共有: While music is playing, activate the music sharing feature (refer to specific button combination in quick start guide if available, typically a double-press of MFB or specific volume button combination) to share audio with a paired intercom unit.

5.5FMラジオ

The integrated FM radio allows you to listen to news and traffic information while riding.

• FMラジオのオン/オフ: Double-press the Power/Intercom Button.
• スキャンチャンネル: Short press the Volume Up or Volume Down button to scan for the next/previous available station.

5.6 通話管理

The MX2 features an automatic call answering function to ensure riding safety.

• 自動応答: Incoming calls will be automatically answered after approximately 8 seconds.
• 手動で通話に応答/終了する: Short press the MFB to manually answer or end a call.
• 通話を拒否: 着信を拒否するには、MFB を長押しします。
• Support for Social Software Calls: The headset supports answering calls from applications like WhatsApp, Line, and WeChat.

5.7音声アシスタント

Activate your smartphone's voice assistant hands-free.

• 音声アシスタントを有効にする： Triple-press the MFB to activate Siri (iOS) or Android voice assistant.

5.8 ボリュームコントロール

• 音量を上げる： 音量アップボタンを短く押します。
• 音量を下げる： 音量ダウンボタンを短く押します。

6. メンテナンスとケア

Proper maintenance ensures the longevity and optimal performance of your MAXTO MX2 headset.

• クリーニング： ユニットを柔らかいdで拭きますamp 布で拭いてください。刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。清掃する前に、充電ポートカバーがしっかりと閉まっていることを確認してください。
• 耐水性: The MX2 is IPX6 waterproof, meaning it is protected against powerful water jets. While it can withstand rain and splashes, avoid submerging the unit in water. Ensure all ports are sealed when exposed to moisture.

• ストレージ： デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• バッテリーのケア： If you do not plan to use the product for an extended period, it is recommended to charge the battery regularly, approximately every three months, to maintain battery health and prevent deep discharge.

7。 トラブルシューティング

If you encounter issues with your MAXTO MX2 headset, please refer to the following common problems and solutions:

これらの解決策を試しても問題が解決しない場合は、カスタマー サポートに連絡してサポートを受けてください。

8. 技術仕様

9. 保証とサポート

MAXTO is committed to providing high-quality products and customer satisfaction. For any issues regarding defective accessories or unit malfunctions, please contact our support team.

カスタマーサポート: For assistance, please reach out to the seller "USHuiDa" via the platform where you purchased the product. They are available to help and will reply within 12 hours.

We continuously optimize our products based on consumer feedback to ensure a better user experience. Your satisfaction is our priority.