Kircuit 12.6V AC/DC Adapter Instruction Manual

1. はじめに

This manual provides instructions for the safe and effective use of your Kircuit 2-Prong 12.6V AC/DC Adapter. This adapter is designed to convert AC power into the DC power required by compatible devices, specifically the Lienuis Model A12P 11.1V 4400mAh Li-ion Battery for cordless robot vacuum and automatic swimming pool cleaners.

The Kircuit adapter is tested and designed to meet the power needs of your device, allowing you to operate your device or charge its battery from electrical power outlets.

2. 重要な安全情報

• 巻tage互換性： The adapter's output is 12.6VDC. Ensure your device requires 12.6VDC input. Note that the 11.1V mentioned for the Lienuis Model A12P refers to the battery's voltage, not the charger's required output voltage.
• 保護機能: This adapter includes Over Voltage output Protection (OVP), Over Current output Protection (OCP), and Short Circuit output Protection (SCP) to safeguard your device.
• 屋内使用のみ: This adapter is intended for indoor use in dry conditions. Do not expose to water or excessive moisture.
• 適切な取り扱い: Do not attempt to open or modify the adapter. Avoid dropping or subjecting it to strong impacts.
• 使用しないときはプラグを抜いてください: 長期間使用しない場合は、アダプタを電源コンセントから抜いてください。

3. セットアップ手順

3.1 開梱

Carefully remove the Kircuit AC/DC adapter from its packaging. Inspect the adapter and its cord for any signs of damage. If any damage is observed, do not use the adapter and contact customer support.

3.2 アダプタの接続

1. 互換性の確認: Before connecting, confirm that your device (e.g., Lienuis Model A12P cordless robot vacuum) requires a 12.6VDC input and has a compatible 2-pin connector.
2. デバイスに接続します: Insert the barrel connector of the adapter cable firmly into the DC input port of your device.
3. 電源コンセントに接続します。 Plug the 2-prong end of the adapter into a standard 100-240VAC 50/60Hz electrical wall outlet.
4. 電源オン: Once connected, your device should begin charging or power on, depending on its design.

Figure 1: Kircuit 2-Prong 12.6V AC/DC Adapter. This image shows a close-up of the black adapter unit with its specifications label visible, featuring the Kircuit brand and input/output details.

Figure 2: Kircuit Adapter in use. The adapter is shown plugged into a white power strip on a desk, demonstrating a typical usage scenario.

4. 操作手順

The Kircuit 12.6V AC/DC Adapter is designed for straightforward operation. Once properly connected to a compatible device and a power outlet, it will automatically supply power or charge the device's battery.

• アダプタが壁のコンセントとデバイスの両方にしっかりと差し込まれていることを確認してください。
• Monitor your device's charging indicator (if available) to confirm it is receiving power.
• Avoid using the adapter in environments with extreme temperatures or high humidity.

5. メンテナンス

To ensure the longevity and optimal performance of your Kircuit AC/DC adapter, follow these simple maintenance guidelines:

• クリーニング： Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior of the adapter. Do not use liquid cleaners or solvents.
• ストレージ： 使用しないときは、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。ケーブルを強く巻き付けると損傷する恐れがありますので、ご注意ください。
• ケーブルのお手入れ: Regularly inspect the power cord for any cuts, fraying, or bends. Do not use the adapter if the cable is damaged.

6。 トラブルシューティング

6.1 Device Not Charging/Powering On

• 接続を確認してください: アダプタが壁のコンセントとデバイスの両方にしっかりと差し込まれていることを確認してください。
• アウトレットを確認: 別のデバイスで壁のコンセントをテストし、機能することを確認します。
• デバイスの互換性: Double-check that your device's power requirements match the adapter's output (12.6VDC).
• バッテリーの状態: Rechargeable batteries have a limited lifespan (typically 1 to 3 years). If the battery in your device is old or dead, it may not accept a charge, even with a working charger. This is not an issue with the charger itself.
• Test Charger Output: If you suspect the charger is faulty, use a voltmeter to test its output voltage. A working charger should show approximately 12.6VDC.

6.2 Adapter Overheating

• It is normal for adapters to become slightly warm during operation. However, if the adapter becomes excessively hot to the touch, immediately unplug it from the wall and the device.
• Ensure adequate ventilation around the adapter. Do not cover it or place it in an enclosed space.
• 過熱が続く場合は使用を中止し、カスタマー サポートにお問い合わせください。

7. 仕様

8. サポート

For further assistance, technical support, or inquiries regarding your Kircuit 12.6V AC/DC Adapter, please refer to the contact information provided with your purchase or visit the Kircuit official webサイト。