SEQURE H743 V2 & E70 G2 (AM32) Flight Controller Stack Instruction Manual

導入

This manual provides detailed instructions for the installation, setup, and operation of the SEQURE H743 V2 & E70 G2 (AM32) Flight Controller Stack. Please read this manual thoroughly before use to ensure proper functionality and safety.

製品終了view

The SEQURE H743 V2 & E70 G2 (AM32) is a high-performance flight controller (FC) and 4-in-1 Electronic Speed Controller (ESC) stack designed for FPV drones, racing, and freestyle quadcopters.

主な特徴

Built-in STM32H743 processor, ICM42688P gyro, and angled soldering pad that reduce the difficulty of welding, safer to use.
SEQURE flight controller supports up to 8 motors, easily constructing X8. Integrated with 5V/10V dual BEC output, providing independent power for DJI O3 and analog VTX.
4-in-1 ESC, 70A continuous current, 150A peak current. Supports 2-8S Lipo, digital protocol DShot600/300/150 and is compatible with Oneshot/MultiShot/PWM protocol.
Built-in galvanometer, supports telemetry return, and updates motor speed, temperature, current and other data in real time.
Supported LED, used for WS2812 LED controlled by Betaflight firmware, for customizable lighting effects.

SEQURE H743 V2 & E70 G2 (AM32) Flight Controller Stack with included accessories

Image: The SEQURE H743 V2 & E70 G2 (AM32) Flight Controller Stack, showcasing the main board and various included accessories such as cables, connectors, and mounting hardware.

Close-up of the SEQURE Flight Controller showing the STM32H743 MCU

画像: 詳細な view of the flight controller board highlighting the high-performance STM32H743 Microcontroller Unit (MCU), which operates at up to 480MHz for rapid control response.

Close-up of the SEQURE Flight Controller showing beveled soldering pads

Image: An illustration of the innovative beveled surface pads on the flight controller, designed to simplify motor wiring and enhance soldering safety.

Diagram showing 30.5x30.5mm mounting hole spacing on the SEQURE Flight Controller

Image: A diagram illustrating the 30.5x30.5mm mounting hole spacing of the flight controller, indicating its compact structure and adaptability to various drone frames.

Close-up of the SEQURE Flight Controller showing the built-in galvanometer

画像: クローズアップ view of the flight controller board, highlighting the built-in galvanometer which supports real-time telemetry return for speed, current, and temperature data.

Diagram highlighting barometer, OSD, 16MB black box, and ICM-42688-P Gyro on the SEQURE Flight Controller

Image: A diagram pointing out key components on the flight controller, including the onboard barometer (BMP280), OSD, 16MB black box for flight data recording, and the ICM-42688-P Gyro for precise posture sensing.

Image: Technical drawing providing detailed dimensions of the SEQURE Flight Controller Stack, including individual board sizes and the overall stack height.

以上view of SEQURE Flight Controller Stack features including MCU, Gyro, BEC, UARTs, Black Box, Barometer, and Image Transmission

Image: An infographic summarizing the key technical specifications of the SEQURE Flight Controller Stack, such as STM32H743 MCU, ICM-42688-P Gyro, 6 UARTs, 4-8S Lipo input, Dual BEC (5V/2.5A, 10V/2A), 16MB Black Box, BMP280 Barometer, and HD/Analog Image Transmission support.

箱の中身

1 x FC & 4in1 ESC
ケーブル x 5
1 x 60mm Length 12095 5V Buzzer
10 x M3*8mm Silicone Shock-absorbing Washer (Black)
1 x XT60H-M Black Male Connector

仕様

特徴	詳細
ブランド	シークア
モデル名	H743 V2 & E70 G2 (AM32)
色	黒
接続技術	無線周波数
アイテム重量	0.1キログラム（3.52オンス）
コントロールタイプ	リモートコントロール
材料	金属、プラスチック
無線通信技術	無線周波数
電池付属	いいえ
リモコン付属	いいえ
光センサー技術	シーモス
充電式バッテリー付属	いいえ
メーカー	シークア
製品寸法	1.99 x 1.43 x 1.01インチ

セットアップと配線

Proper wiring is crucial for the safe and correct operation of your flight controller stack. Refer to the diagrams below for detailed connection instructions.

Recommended UART Port Usage

Diagram showing recommended UART port assignments for the SEQURE Flight Controller

Image: A diagram illustrating the recommended usage for the 6 UART ports on the flight controller, including assignments for Receiver, VTX, Optional, GPS, DJI HD, and ESC telemetry.

UART1: Receiver
UART2: VTX
UART4: Optional
UART6: GPS
UART7: DJI HD
UART8: ESC telemetry

Flight Controller Wiring Diagram

Detailed wiring diagrams for SEQURE H743 V2 Flight Controller, showing pad connections and SH1.0 socket connections

Image: Comprehensive wiring diagrams for the SEQURE H743 V2 Flight Controller, detailing connections for various peripherals via both soldering pads and SH1.0 sockets, including LED, Camera, DJI FPV Air Unit, Buzzer, ELRS, and VTX.

ESC配線図

Wiring diagram for the E70 G2 4-in-1 ESC, showing motor and battery connections

Image: Wiring diagram for the E70 G2 4-in-1 ESC, illustrating connections for motors (M1-M4), battery (2-8S Lipo), and telemetry (TX, CR, VBAT, GND).

モバイルデバイスへの接続

Video: This video demonstrates the process of connecting the flight controller to a mobile device using an OTG adapter and the Speedy Bee app for configuration and monitoring.

手術

The SEQURE Flight Controller Stack is compatible with Betaflight firmware. For detailed configuration and tuning, please refer to the official Betaflight documentation.

ESCプロトコル

The 4-in-1 ESC supports digital protocols DShot600/300/150 and is compatible with Oneshot/MultiShot/PWM protocols. Ensure your flight controller firmware is configured to match the selected ESC protocol.

LEDコントロール

The flight controller supports WS2812 LEDs, which can be controlled via Betaflight firmware for customizable lighting effects, especially useful for night flying.

メンテナンス

Regularly inspect all solder joints and connections for any signs of damage or corrosion.
Keep the flight controller and ESC clean from dust, dirt, and moisture. Use compressed air or a soft brush for cleaning.
特に集中的に使用する場合は、過熱を防ぐために適切な換気を確保してください。
Periodically check for firmware updates for both the flight controller and ESC to benefit from performance improvements and bug fixes.

トラブルシューティング

問題が発生した場合は、次の一般的なトラブルシューティング手順を検討してください。

電源なし/断続的な電源: Check all power connections, including the XT60H-M connector and battery. Verify battery voltage.
モーターが回転しない/正しく回転しない: Ensure ESC calibration is correct. Check motor direction in Betaflight. Verify DShot/Oneshot/MultiShot/PWM protocol settings match. Inspect motor wires for damage.
テレメトリデータなし: Confirm galvanometer is properly connected and configured in Betaflight. Check UART settings for telemetry.
飛行不安定性: Recalibrate accelerometer and gyroscope in Betaflight. Check for loose components or vibrations. Ensure correct PID tuning.
Connection Issues with PC/Mobile: Ensure correct drivers are installed. Try a different USB cable or OTG adapter. Verify port settings in Betaflight configurator.

Automated Testing Overview

Video: This video demonstrates an automated software testing process for a flight controller, highlighting how various ports and functions are verified for correct operation. This can be useful for understanding diagnostic procedures.

Video: This video illustrates an automated testing procedure for an F405 flight controller, demonstrating how the system identifies and reports issues with disconnected ports, ensuring all functionalities are checked.

安全情報

警告: 窒息の危険 - 小さな部品。 小さなお子様の手の届かない場所に保管してください。

Always ensure proper insulation of all electrical connections to prevent short circuits.

Handle with care to avoid electrostatic discharge damage to sensitive electronic components.

Disconnect the battery before performing any maintenance or wiring changes.

保証とサポート

For warranty information and technical support, please refer to the official SEQURE webサイトをご覧いただくか、販売店にお問い合わせください。

Protection plans are available for extended coverage. Please check product listings for details.